• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.189-189
• /
• 2012

Lead sulfide (PbS) nanocrystal quantum dots (NQDs) are promising materials for various optoelectronic devices, especially solar cells, because of their tunability of the optical band-gap controlled by adjusting the diameter of NQDs. PbS is a IV-VI semiconductor enabling infrared-absorption and it can be synthesized using solution process methods. A wide choice of the diameter of PbS NQDs is also a benefit to achieve the quantum confinement regime due to its large Bohr exciton radius (20 nm). To exploit these desirable properties, many research groups have intensively studied to apply for the photovoltaic devices. There are several essential requirements to fabricate the efficient NQDs-based solar cell. First of all, highly confined PbS QDs should be synthesized resulting in a narrow peak with a small full width-half maximum value at the first exciton transition observed in UV-Vis absorbance and photoluminescence spectra. In other words, the size-uniformity of NQDs ought to secure under 5%. Second, PbS NQDs should be assembled carefully in order to enhance the electronic coupling between adjacent NQDs by controlling the inter-QDs distance. Finally, appropriate structure for the photovoltaic device is the key issue to extract the photo-generated carriers from light-absorbing layer in solar cell. In this step, workfunction and Fermi energy difference could be precisely considered for Schottky and hetero junction device, respectively. In this presentation, we introduce the strategy to obtain high performance solar cell fabricated using PbS NQDs below the size of the Bohr radius. The PbS NQDs with various diameters were synthesized using methods established by Hines with a few modifications. PbS NQDs solids were assembled using layer-by-layer spin-coating method. Subsequent ligand-exchange was carried out using 1,2-ethanedithiol (EDT) to reduce inter-NQDs distance. Finally, Schottky junction solar cells were fabricated on ITO-coated glass and 150 nm-thick Al was deposited on the top of PbS NQDs solids as a top electrode using thermal evaporation technique. To evaluate the solar cell performance, current-voltage (I-V) measurement were performed under AM 1.5G solar spectrum at 1 sun intensity. As a result, we could achieve the power conversion efficiency of 3.33% at Schottky junction solar cell. This result indicates that high performance solar cell is successfully fabricated by optimizing the all steps as mentioned above in this work.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.54-63
• /
• 2000

We present a multi-resolution block matching algorithm (BMA) for fast motion estimation At the coarsest level, a motion vector (MV) having minimum matching error is chosen via a full search, and a MV with minimum matching error is concurrently found among the MVs of the spatially adjacent blocks Here, to examine the spatial MVs accurately, we propose an efficient method for searching full resolution MV s without MV quantization even at the coarsest level The chosen two MV s are used as the initial search centers at the middle level At the middle level, the local search is performed within much smaller search area around each search center If the method used at the coarsest level is adopted here, the local searches can be done at integer-pel accuracy A MV having minimum matching error is selected within the local search areas, and then the final level search is performed around this initial search center Since the local searches are performed at integer-pel accuracy at the middle level, the local search at the finest level does not take an effect on the overall performance So we can skip the final level search without performance degradation, thereby the search speed increases Simulation results show that in comparison with full search BMA, the proposed BMA without the final level search achieves a speed-up factor over 200 with minor PSNR degradation of 02dB at most, under a normal MPEG2 coding environment Furthermore, our scheme IS also suitable for hardware implementation due to regular data-flow.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.188.2-188.2
• /
• 2015

The presence of the conduction interface in epitaxial $LaAlO_3/SrTiO_3$ thin films has opened up challenging applications which can be expanded to next-generation nano-electronics. The metallic conduction path is associated with two adjacent insulating materials. Such device structure is applicable to frequency-dependent impedance spectroscopy. Impedance spectroscopy allows for simultaneous measurement of resistivity and dielectric constants, systematic identification of the underlying electrical origins, and the estimation of the electrical homogeneity in the corresponding electrical origins. Such unique capability is combined with the intentional control on the interface composition composed of $SrTiO_3$ and $CaTiO_3$, which can be denoted by $SrxCa1-_xTiO_3$. The underlying $Sr_xCa1-_xTiO_3$ interface was deposited using pulsed-laser deposition, followed by the epitaxial $LaAlO_3$ thin films. The platinum electrodes were constructed using metal shadow masks, in order to accommodate 2-point electrode configuration. Impedance spectroscopy was performed as the function of the relative ratio of Sr to Ca. The respective impedance spectra were analyzed in terms of the equivalent circuit models. Furthermore, the impedance spectra were monitored as a function of temperature. The ac-based characterization in the 2-dimensional conduction path supplements the dc-based electrical analysis. The artificial manipulation of the interface composition will be discussed towards the electrical application of 2-dimensional materials to the semiconductor devices in replacement for the current Si-based devices.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.4
• /
• pp.313-320
• /
• 2008

The dynamic clustering technique has some problems regarding energy consumption. In the cluster configuration aspect the cluster structure must be modified every time the head nodes are re-selected resulting in high energy consumption. Also, there is excessive energy consumption when a cluster head node receives identical data from adjacent cluster sources nodes. This paper proposes a solution to the problems described above from the energy efficiency perspective. The round-robin cluster header(RRCH) technique, which fixes the initially structured cluster and sequentially selects duster head nodes, is suggested for solving the energy consumption problem regarding repetitive cluster construction. Furthermore, the issue of redundant data occurring at the cluster head node is dealt with by broadcasting metadata of the initially received data to prevent reception by a sensor node with identical data. A simulation experiment was performed to verify the validity of the proposed approach. The results of the simulation experiments were compared with the performances of two of the must widely used conventional techniques, the LEACH(Low Energy Adaptive Clustering Hierarchy) and HEED(Hybrid, Energy Efficient Distributed Clustering) algorithms, based on energy consumption, remaining energy for each node and uniform distribution. The evaluation confirmed that in terms of energy consumption, the technique proposed in this paper was 29.3% and 21.2% more efficient than LEACH and HEED, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.18 no.2
• /
• pp.81-89
• /
• 1982

In order to analyze the formation mechanism for the fishing ground of the Gang-dal-i, the relationship between the fish grounds of the Gang-dal-i and the oceanographic structure of the East China Sea and the Yellow Sea is investigated by using the data of the catches of stow net fishery (Fisheries Research and Development Agency, 1970-1979) and the oceanographic observation data (Japan Meteorological Agency). The main fishing grounds of the Gang-dal-i concentrated in the adjacent seas of Daeheugsan island and Sokotra Rock. In these areas, the fishing conditions are generally stable, because about 70% of the total catch of the Gang-dal-i for the ten years is occupied, CPUE also is relatively great, and the coefficients of variation of the catches are relatively small as 0.9 to 1.4. The main fishing periods are roughly from February to March and June to July, and the years of good catches are from 1974 to 1976. In general, the main fishing grounds are formed in the marginal areas of the Yellow Sea Bottom Cold Water. They are the frontal areas in which the Yellow Sea Bottom Cold Water is intermixed with the Yellow Sea Warm Current. The range of the temperature and the salinity in these regions are from 10 to 13$^{\circ}C$ and 32.5 to 34.4$\textperthousand$, respectively.

• Journal of the Korea Concrete Institute
• /
• v.13 no.6
• /
• pp.593-601
• /
• 2001

In RC structure, sufficient anchorage of reinforcement is necessary for the member to produce the full strength. Generally, conventional standard hook is used for the reinforcement's anchorage. However, the use of standard hook results in steel congestion, making fabrication and construction difficult. Mechanical anchor offers a potential solution to these problems and may also ease fabrication, construction and concrete placement. In this paper, the required characteristics and the design considerations of mechanical anchor were studied. Also, the mechanical anchor was designed according to the requirements. To investigate the pull-out behavior and properness of mechanical anchorage, pull-out tests were performed. The parameters of tests were embedment length, diameter of reinforcement, concrete compressive strength, and spacing of reinforcements. The strengths of mechanical anchor were consistent with the predictions by CCD method. The slip between mechanical anchor and concrete could be controlled under 0.2mm. Therefore, the mechanical anchor with adequate embedment could be used for reinforcement's anchorage. However, it was observed that the strength of mechanical anchors with short spacing of reinforcements was greatly reduced. To apply the mechanical anchor in practice (e.g. anchorage of the beams reinforcements in beam-column joint), other effects that affect the mechanical anchor mechanism, such as confinement effect of adjacent member from frame action or effects of shear reinforcement, should be considered.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.275-280
• /
• 2009

Radicular cyst is a true epithelium lined cyst formed when epithelium at the apex of a nonvital tooth is stimulated by inflammation. It is the most common type of cyst in the oral cavity, but its frequency is low in the primary dentition. Treatment of large-sized cyst aims at conservation of adjacent structure and allowance of proper eruption of the successive permanent teeth in the primary dentition. Considering these two aspects, marsupialization or enucleation following decompression is recommended as a treatment means for large-sized radicular cyst. In this case, 8-year old boy visited the pediatric dentistry department. Yonsei University Dental Hospital, with the chief complaint of pain on the lower right area. Clinical and radiographic examinations revealed periapical radiolucent lesion on #84, which had previous pulp treatment and restorated with the stainless steel crown. Dislocation of its successive tooth, #44, was also observed. #84 was extracted and sent for biopsy. Through histologic examination, it was diagnosed as radicular cyst. Following its extraction, removable space maintainer was delivered, which was also used as a decompressor. During periodic check-up for next 22 months, favorable healing of the lesion and eruption of the successive tooth were observed.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.2
• /
• pp.49-62
• /
• 2001

Hydrographic surveys were carried out seven times during May 31, 1998 and September 24, 1998 in order to study the physical environments of the coastal area between Narodo Is. and Sorido Is. in the southern sea of Korea (the South Sea) where the occurrence of Cochlodinium polykrikoides red tide is frequently observed in summer. Temperature and salinity of the water column from the surface to the depth of 30 m exhibit large seasonal variations. Mean temperature of the water column increased by 6 and mean salinity of the water column decreased by 2.71 psu during the observation period. Both the freshwater supplied from the adjacent land and the precipitation over the study area cannot account for the observed salinity variations. The influx of the low salinity water from the offshore area is considered to be the main cause for the observed salinity changes. Surface salinity in the study area shows different spatial distribution in the period of outbreaking, mid-stage and disappearance of the red tide. Especially, salinity was abruptly lowered at the stage of disappearance of red tide as compared to salinity of the previous observation period. Vertical structure of water properties also became vertically homogeneous at the disappearance stage, while it was highly stratified in the previous observation. Such changes can only be explained by the inflow of low salinity water from the offshore, which is considered as the most possible cause for the disappearance of the red tide in the study area. This study suggests that exchanges of water, and chemical and biological factors between coastal areas and of shore area in the South Sea need to be studied in association with the general circulation of the South Sea in order for the better understanding of the occurrence and disappearance of the red tide in the coastal area of the South Sea.

• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.116-128
• /
• 2017

Traffic accidents can be defined as a physical collision event of vehicles occurred instantaneously when drivers do not perceive the surrounding vehicles and roadway environments properly. Therefore, detecting the high potential events that cause traffic accidents with monitoring the interactions among the surroundings continuously by driver is the prerequisite for prevention the traffic accidents. For the analysis, basic data were collected to analyze interactions using a test vehicle which is equipped the GPS(Global Positioning System)-IMU(Inertial Measurement Unit), camera, radar and RiDAR. From the collected data, highway geometric information and the surrounding traffic situation were analyzed and then safety evaluation algorithm for driving vehicle was developed. In order to detect a dangerous event of interaction with surrounding vehicles, locations and speed data of surrounding vehicles acquired from the radar sensor were used. Using the collected data, the tangent and curve section were divided and the driving safety evaluation algorithm which is considered the highway geometric characteristic were developed. This study also proposed an algorithm that can assess the possibility of collision against surrounding vehicles considering the characteristics of geometric road structure. The methodology proposed in this study is expected to be utilized in the fields of autonomous vehicles in the future since this methodology can assess the driving safety using collectible data from vehicle's sensors.

• Korean Journal of Veterinary Research
• /
• v.34 no.3
• /
• pp.537-547
• /
• 1994

Ninety seven cases of histopathologically diagnosed spontaneous canine parvovirus enteritis(CPE) were studied gross pathologically, histopathologically, immunohistochemically, to investigate histopathological types of small intestinal lesions, and antigen distributions in each pattern related to the infected age. And also, reliability of histopathological method in diagnosis of CPE was inspected with immunohistochemistry. The results were as follows : 1. Age-related occurring ratio in histopathologically diagnosed CPE was 53.6% in 4-8 weeks, 26.8% in 9-15 weeks, 8.25 in 16-19 weeks and 11.3% in 20-45 weeks of the clog age. 2. In histopathologic classification based on patterns of villi/crypts lesions of small intestine(jejunum), the ratio of A type (initial phase of necrosis of crypt epithelia, desquamated epithelial cells in the dilated lumen of the crypt) was 20.6%; the ratio of B type(middle phase of atrophy and fission of the villi, collapse of the mucosa, loss of normal crypt structure) was 62.9%, and C type(regenerative phase of the crypt architecture) was 16.5%. 3. The ratio of A, B, C type in 4-8 weeks old, respectively, was 23.5%, 61.5%, 15.4%; in 9-15 weeks old was 19.2%, 65.4%, 15.3% in 16-19 weeks old was 25.0%, 75.0%, 0.0%; and in 20-45 weeks old was 9.0%, 54.5%, 36.4%. 4. The antigen distribution in the nuclei of the crypt epithelial cells was higher than of the cytoplasm and numerous desquamated epithelial cells in dialated crypts in A type; The antigen cytoplasm and numerous desquamated epithelial cells in dialated crypts in A type; The antigen distribution in the nuclei of the collapsed crypt epithelial cells was not higher than that of the cytoplasm, crypts were lined by and filled with released viral antigens from the destructed epithelial cells in B type; and its distribution was also higher than in the epithelial cells adjacent to the tips of the villi, but it was not reacted in the regenerative crypt epithelial cells in C type. 5. Immunohistochemically detected antigen ratio in the small intestine of histopathologically diagnosed CPE was 94.6%, and this result indicates that histopathological diagnosis is very reliable method in diagnosis of CPE.