• 한국재료학회지
• /
• 제8권8호
• /
• pp.744-750
• /
• 1998

마이크로 머신 소자는 일반전자 소자와 달리 소자 자체에 미세한 기계적 구조물을 갖고 있으며, 이의 구동을 통하여 센서 또는 엑츄에이터의 기능을 갖게 된다. 이 소자들은 그 작동 요구특성에 따라 패키지의 기계적, 환경적 격리를 요구하거나 분위기조절이 요구되는 등 까다로운 패키지 특성을 필요로 한다. 또한 미세한 작동소자들로 인하여 열 및 열응력에 매우 민감하며, 패키지방법에 따라 구동부위의 작동 특성이 크게 변화할 수 있다. 본 연구에서는 마이크로 머신 소자가 패키지 상에 접촉되어 패키지 될 때, 소자의 접촉 재료 및 공정온도, 크기 등이 마이크로 머신 소자에 미치는 열응력을 연구하였다. 유한요소해석법을 사용하여 소자에 미치는 열응력과 이로 인한 마이크로머신 소자의 물리적 변형을 예측하고, 이를 통하여 마이크로 머신 소자 패키지에 최소한의 열응력을 미치는 소자접속 재료의 선별과 패키지 설계의 최적화를 이루고자 하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.534-540
• /
• 2001

One approach to testing the suitability of an adhesive joint for a particular application is to build and test to destruct ion a representative sample of the joint. The nondestructive test will not measure strength directly but will measure a parameter which can be correlated to strength. It is therefore, essential that a suitable nondestructive test is chosen and that its results are correctly interpreted. In this paper, typical defects found in adhesive joints are described together with their significance. The limits and likely success of current physical nondestructive tests are described, and future trends outlined.

• 열처리공학회지
• /
• 제5권1호
• /
• pp.1-12
• /
• 1992

In order to improve adhesive force of TiN film, we sputtered titanium as interlayer before TiN deposition by Plasma Enhanced Chemical Vapour Deposition. We observed changes of hardness and adhesion at a various thickness of titanium interlayer and also examined analysis. At the critical thickness of the titanium interlayer(about $0.2{\mu}$), adhesive force of TiN films were promoted mostly. But over the critical thickness, a marked reduction of adhesive force was showed, because of the internal stress of titanium interlayer. From AES analysis, the adhesion improvement of TiN films was mainly caused by nitrogen diffusion into titanium interlayer during TiN deposition process which relieved stress concentration at TiN coating-substrate interface.

• 한국전산구조공학회논문집
• /
• 제13권1호
• /
• pp.97-103
• /
• 2000

이 논문에서는, 반도체 칩과 리드프레임을 결합하는 과정에서 점탄성 접착제층에 발생하는 잔류응력 문제를 다루고 있다. 접착제층은 “열유동단순”거동을 한다고 가정하였다. 접착제층에서의 응력들은 경계요소법을 사용하여 조사하였다. 매우 큰 응력 구배가 계면 모서리에서 발생하는데, 그러한 응력들은 국부 항복을 일으키거나, 칩과 리드프레임의 박리를 야기시킬 수 있음을 보여주고 있다.

• Steel and Composite Structures
• /
• 제20권2호
• /
• pp.413-429
• /
• 2016

A theoretical method to predict the interfacial stresses in the adhesive layer of reinforced concrete beams strengthened with externally bonded carbon fiber-reinforced polymer (CFRP) plate is presented. The analysis provides efficient calculations for both shear and normal interfacial stresses in reinforced concrete beams strengthened with composite plates, and accounts for various effects of Poisson's ratio and Young's modulus of adhesive. Such interfacial stresses play a fundamental role in the mechanics of plated beams, because they can produce a sudden and premature failure. The analysis is based on equilibrium and deformations compatibility approach developed by Tounsi. In the present theoretical analysis, the adherend shear deformations are taken into account by assuming a parabolic shear stress through the thickness of both the reinforced concrete beam and bonded plate. The paper is concluded with a summary and recommendations for the design of the strengthened beam.

• Structural Engineering and Mechanics
• /
• 제10권2호
• /
• pp.125-138
• /
• 2000

The paper analyzes the problem of torsion in an adhesive non-tubular bonded single-lap joint. The joint considered consists of two thin rectangular section beams bonded together along a side surface. Assuming the materials involved to be governed by linear elastic laws, equilibrium and compatibility equations were used to arrive at an integro-differential relation whose solution makes it possible to determine torsional moment section by section in the bonded joint between the two beams. This is then used to determine the predominant stress and strain field at the beam-adhesive interface (stress field along the direction perpendicular to the interface plane, equivalent to the applied torsional moment and the corresponding strain field) and the joint's elastic strain (absolute and relative rotations of the bonded beam cross sections). All the relations presented were obtained in closed form. Results obtained theoretically are compared with those given by a three dimensional finite element numerical model. Theoretical and numerical analysis agree satisfactorily.

• 한국융합학회논문지
• /
• 제9권5호
• /
• pp.151-156
• /
• 2018

본 연구에서는 CFRP와 금속 또는 비금속을 접착제로 접합시켜 이 재료에 대한 파손 연구를 수행하였다. 그 해석 조건으로는 DCB 시험편을 이용하여 시험편의 상부에는 CFRP, 시험편의 하부에는 금속 또는 비금속 재료로 지정하였고 두 상부와 하부 사이를 구조용 접착제로 부착하는 것을 묘사하였다. 이 해석 결과로는 알루미늄으로 접착된 시험편에서 가장 작은 등가응력 보였고 티타늄을 사용하였을 때 박리된 CFRP시험편에서의 최대 전단응력은 가장 낮음을 보였다. 결론적으로 티타늄을 사용하였을 때 시험편의 변형이 가장 작은 것을 알 수 있었고 본 연구 결과를 토대로 접착제를 이용한 접착 계면의 파손데이터를 실생활에 융합하여 그 미적 감각을 나타낼 수 있다.

• Steel and Composite Structures
• /
• 제49권3호
• /
• pp.271-280
• /
• 2023

In this study, the three-dimensional finite element method is used to analyze the behavior of corner cracks in finite-thickness plates repaired with a composite patch. The normalized stress intensity factor at the crack front is used as fracture criterion. Comparison of stress intensity factor values at the internal and external positions of repaired quarter-elliptical corner crack was done, for three repair techniques. The influence of mechanical and geometrical properties of the adhesive layer and the composite patch on the variation of the stress intensity factor (SIF) at the crack-front was highlighted. The obtained results show that the application of double patch leads to a remarkable reduction of SIF at the crack front, compared to facial and lateral repairs.

• 대한기계학회논문집A
• /
• 제30권12호
• /
• pp.1543-1550
• /
• 2006

Since the performance of joints usually determines the structural efficiency of composite structures, an extensive knowledge of the behavior of adhesive joints and the related effect on joint strength is essential for design purposes. In this study, the torque capacity of adhesive joints was predicted using the combined thermal and mechanical analyses when the adherend was a composite tube. A finite element analysis was performed to evaluate residual thermal stresses developed in the joint, and mechanical s stresses in the adhesive were calculated including both the nonlinear adhesive behavior and the behavior of composite tubes. Three different joint failure modes were considered to predict joint failure: interfacial failure, adhesive bulk failure, and adherend failure. The influence of the composite adherend stacking angle on the residual thermal stresses was investigated, and how the residual thermal stresses affect the joint strength was also discussed. Finally, the predicted results were compared with experimental results available in literature.

• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.95-105
• /
• 1986

For the purpose of obtaining a basic data in selecting a suitable material with clinical care, this study was designed to measure the shear stress and to examine the fracture pattern of various dentin bonding restorative materials using 43 extracted bicuspids. The following results were obtained. 1. In dentin, Silux/Scotchbond group showed the highest value ($34.5{\pm}14.7kg/cm^2$) and Fuji Ionomer Type II group and Heliosit/Dentin-Adhesit group showed almost same bond strength in the next place. Durafill/Dentin-Adhesive group showed an infinitesimal value. ($3.1{\pm}1.4kg/cm^2$) 2. Every group showed no difference in bond strength between upper and lower teeth. Between buccal and lingual surfaces. Fuji Ionomer Type II and Durafill/Dentin-Adhesive groups showed too. But, in Silux/Scotchbond and Heliosit/Dentin-Adhesit groups, it was shown that the bond strength in lingual was stronger than in buccal. 3. There was resin fracture with cohesive fracture of bonding agent in Enamel group. In dentin, adhesive-cohesive fracture and adhesive fracture were shown. 4. The stronger bond strength was, the more frequently cohesive fracture occurred. Dentin-Adhesit group showed specific shining appearance as if varnish became hard.