• 제목/요약/키워드: adhesive power

검색결과 149건 처리시간 0.035초

TiN 나노 박막을 코팅한 AL7075-T7351 알루미늄 합금의 트라이볼로지 특성에 관한 연구 (A Study on the Tribological Characteristics of AL7075-T7351 Aluminum Alloy Coated with TiN Nano Thin Film)

  • 김광수;임성훈;김도현;박형준;허선철
    • 한국산업융합학회 논문집
    • /
    • 제26권5호
    • /
    • pp.743-750
    • /
    • 2023
  • Aluminum alloy is a material widely used in the aircraft industry. However, since it has relatively low hardness, strength and tribological properties, it is necessary to improve these properties. In this paper, a TiN thin film was coated on the surface of AL7075-T7351 using DC magnetron sputtering. The coating was performed by setting different deposition pressure, deposition time, and applied power. Then, the tribological properties of the thin film were investigated. As a result of the experiment, the hardness of the thin film was higher than that of the base material, and the specimen with the highest hardness had excellent friction coefficient, wear amount, and adhesive strength characteristics. Through this study, it was confirmed that the tribological characteristics of aluminum alloy can be improved by depositing thin films using DC magnetron sputtering.

질화알루미늄 나노분말의 부착과 이를 활용한 초소수성 표면 제작 (Deposition of aluminum nitride nanopowders and fabrication of superhydrophobic surfaces )

  • 이광석;최헌주;조한동
    • 한국표면공학회지
    • /
    • 제57권1호
    • /
    • pp.49-56
    • /
    • 2024
  • Superhydrophobic surfaces have been expected to be able to provide considerable performance improvements and introduce innovative functions across diverse industries. However, representative methods for fabricating superhydrophobic surfaces include etching the substrate or attaching nanosized particles, but they have been limited by problems such as applicability to only a few materials or low adhesion between particles and substrates, resulting in a short lifetime of superhydrophobic properties. In this work, we report a novel coating technique that can achieve superhydrophobicity by electrophoretic deposition of aluminum nitride (AlN) nanopowders and their self-bonding to form a surface structure without the use of binder resins through a hydrolysis reaction. Furthermore, by using a water-soluble adhesive as a temporary shield for the electrophoretic deposited AlN powders, hierarchical aluminum hydroxide structures can be strongly adhered to a variety of electrically conductive substrates. This binder-free technique for creating hierarchical structures that exhibit strong adhesion to a variety of substrates significantly expands the practical applicability of superhydrophobic surfaces.

거동 부자유 노인을 위한 일회용 기저귀 개발에 관한 연구 (A Study for the Development of Disposable Diaspers for the Elderly in Need)

  • 조진숙;김소라;최진희
    • 대한가정학회지
    • /
    • 제37권7호
    • /
    • pp.29-43
    • /
    • 1999
  • The purpose of this study was to develop disposable diapers for the elderly in need by experimenting with wearing disposable diapers and analyzing the properties of materials of these diapers. The diapers were of two different types: one was a panty type for the elderly who were bed ridden, and the other was a pad type for the elderly who had incontinence. The subjects for the wearing test of the panty type were forty who were bed ridden, and there were forty subjects for the wearing test of the pad type who had incontinence. The disposable diapers for these experiments were chosen from those already found in the market place. Four panty types and three pad types were selected. From these experiments for the disposable diapers, the first prototypes were developed, and the second prototypes were proposed by experimenting with the first prototypes. The first panty prototype was designed to improve absorbing power, and we added waist rubber bands to prevent evacuation from back leaking and a frontal tape to prevent waistline film from tearing. The first pad prototype was designed to improve absorbing power also, and we added side rubber bands to prevent the side leaking and an adhesive tape on the fore part of the bottom to prevent the diapers from moving, and made the outline of the back area curved and thin to help hide the diaper from detection thus making the wearer feel better. From these test cases and analyzing the properties of materials with the first prototypes, we gained some success, but several points on further improvements were proposed to refine the final prototypes. The second panty prototype we proposed was to make 1he length longer, especially in the crotch area to prevent excess leaking and to fit the body more snugly. Also, the second pad prototype was proposed to reduce the total thickness of the diaper, and to improve the feeling and appearance.

  • PDF

코로나 표면 처리의 접착력 향상에 의한 이차원 오디오 시스템의 출력 개선 (Output Improvement of Two-dimensional Audio Actuators by Corona Surface Treatments to Increase Adhesive Properties of Piezoelectric Materials)

  • 엄기홍
    • 한국인터넷방송통신학회논문지
    • /
    • 제12권5호
    • /
    • pp.91-97
    • /
    • 2012
  • 근래의 전기 전자 제품은 기능은 향상되는 반면 크기는 소형화되는 추세에 있다. 기존 입체 형태의 음향 신호 재생 장치로서의 엑츄에이터 대신 압전 소자를 이용한 스피커가 개발되기 시작하였다. 압전 소자는 압전 특성을 갖는 물질로서 물체의 외부에서 전압을 가할 때 기계적인 변형을 일으키는 특징(즉 피에조 특징)을 이용한다. 초기의 필름 스피커는 화학적 성질의 한계로 인하여 전도성 고분자 막을 형성하기 힘들다는 한계가 있었고, 도포한 두께를 균일하게 유지하기 힘들었으며, 음향 신호의 출력과 동작 주파수의 한계가 있다는 등의 종래 기술의 문제점을 해결하기 위해, 전도 물질과 피에조 물질(필름)의 결합력을 증가시킴으로써 전도체의 저항을 줄이고 주파수 영역을 확장하고자 한다. 피에조 필름의 표면 접착력을 향상시키고, 고분자 전도체 막의 흡착력을 증가시킴으로써 음향시스템의 출력 향상을 위해 코로나 표면처리방식에 의한 표면 특징을 변화시킴으로써 출력개선을 하였다.

Planar Type Flexible Piezoelectric Thin Film Energy Harvester Using Laser Lift-off

  • Noh, Myoung-Sub;Kang, Min-Gyu;Yoon, Seok Jin;Kang, Chong-Yun
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.489.2-489.2
    • /
    • 2014
  • The planar type flexible piezoelectric energy harvesters (PEH) based on PbZr0.52Ti0.48O3 (PZT) thin films on the flexible substrates are demonstrated to convert mechanical energy to electrical energy. The planar type energy harvesters have been realized, which have an electrode pair on the PZT thin films. The PZT thin films were deposited on double side polished sapphire substrates using conventional RF-magnetron sputtering. The PZT thin films on the sapphire substrates were transferred by PDMS stamp with laser lift-off (LLO) process. KrF excimer laser (wavelength: 248nm) were used for the LLO process. The PDMS stamp was attached to the top of the PZT thin films and the excimer laser induced onto back side of the sapphire substrate to detach the thin films. The detached thin films on the PDMS stamp transferred to adhesive layer coated on the flexible polyimide substrate. Structural properties of the PZT thin films were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). To measure piezoelectric power generation characteristics, Au/Cr inter digital electrode (IDE) was formed on the PZT thin films using the e-beam evaporation. The ferroelectric and piezoelectric properties were measured by a ferroelectric test system (Precision Premier-II) and piezoelectric force microscopy (PFM), respectively. The output signals of the flexible PEHs were evaluated by electrometer (6517A, Keithley). In the result, the transferred PZT thin films showed the ferroelectric and piezoelectric characteristics without electrical degradation and the fabricated flexible PEHs generated an AC-type output power electrical energy during periodically bending and releasing motion. We expect that the flexible PEHs based on laser transferred PZT thin film is able to be applied on self-powered electronic devices in wireless sensor networks technologies. Also, it has a lot of potential for high performance flexible piezoelectric energy harvester.

  • PDF

다이아몬드 마이크로블레이드의 내구성과 절삭성능에 미치는 흑연과 MoS2의 첨가효과 (The Effect of Graphite and MoS2 on Endurance and Cutting Performance of Diamond Micro Blades)

  • 문종철;김송희
    • 한국표면공학회지
    • /
    • 제41권6호
    • /
    • pp.335-340
    • /
    • 2008
  • Cutting performance and wear behavior were studied with the diamond micro-blade of Cu/Sn bond materials containing various amount of lubricant materials such as graphite and $MoS_2$. Measurement of instantaneous electric power consumption for cutting glass workpiece at the constant velocity was conducted and proposed as a method to assess cutting efficiency. The energy consumption of micro-blade for glass cutting decreased with the content of graphite and $MoS_2$ while wear amount of blade in volume increased with the amount of lubricant addition during the dicing test. It is because that hardness, flexural strength, and fracture toughness ($K_{IC}$) reduced with the amount of lubricant addition. Blades with $MoS_2$ additive showed higher mechanical properties than those with graphite additives when the same amount of the lubricant additive in wt.% was added. Due to the lower density of graphite than $MoS_2$, higher volume fraction of graphite could result in stronger effect on lowering electric power consumption by reducing the friction between blade and work piece however increasing wear rate due to the reduction in strength and fracture toughness. Adhesive wearing mode of micro blade could be remarkably improved by the addition of graphite as well as $MoS_2$.

유동가압성형(TPM)을 이용한 휴대용 유도무기용 연소관 조립체 제작공정연구 (A study on the manufacturing of motor case assembly for K-PSAM propulsion system by Trans. power molding(TPM) process)

  • 정상기;윤남균
    • 한국추진공학회지
    • /
    • 제2권3호
    • /
    • pp.107-115
    • /
    • 1998
  • 복합재료와 금속 튜브 사이의 좁고 긴 원통형 공간을 EPDM(Ethylene propylene dien ter polymer)으로 충전하는 연구를 수행하였다. 휴대용 유도무기의 추진기관을 개발하기 위하여 소형 연소관 조립체를 설계하고 제작하였다. 연소관 조립체는 연소관 금속튜브, 연소관 내열재, 그리고 연소관 단열재로 이루어져 있는데 연소관 내열재는 탄소/페놀릭을 사용하여 롤링 공법으로 제작하였으며 연소관 단열재는 EPDM을 사용하여 TPM 공법으로 제작하였다. EPDM의 조성 선정을 위하여 내열 삭마특성, 열분해특성 실험을 수행하였으며 흐름성, 접착성, 경도측정 등을 통하여 최종 조성을 결정하였다. 연소관 조립체를 제작하기 위한 EPDM 충전을 위하여 TPM 공법을 설계하고 금형과 치구를 제작하였다. 충전된 연소관 조립체는 비파괴검사를 통하여 접착, 기공 등을 검사하여 최종 선정되었다.

  • PDF

박막증착조건 변화에 따른 $CuInSe_2$ 박막의 특성에 관한 연구 (Characterization of $CuInSe_2$ thin film depending on deposition parameters)

  • 김영준;양현훈;소순열;정운조;박계춘;이진;정해덕
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
    • /
    • pp.119-122
    • /
    • 2006
  • Process variables for manufacturing the $CuInSe_2$ thin film were established in order to clarify optimum conditions for growth of the thin film depending upon process conditions (substrate temperature, sputtering pressure, DC/RF Power), and then by changing a number of vapor deposition conditions and Annealing conditions variously, structural and electrical characteristics were measured. Thereby, optimum process variables were derived. For the manufacture of the $CuInSe_2$, Cu, In and Se were vapor-deposited in the named order. Among them, Cu and In were vapor-deposited by using the sputtering method in consideration of their adhesive force to the substrate, and the DC/RF power was controlled so that the composition of Cu and In might be 1:1, while the surface temperature having an effect on the quality of the thin film was changed from 100[$^{\circ}C$] to 300[$^{\circ}C$] at intervals of 50[$^{\circ}C$].

  • PDF

Hard PZT IDE 유니몰프 캔틸레버의 압전 에너지 하베스팅 특성 (Piezoelectric Energy Harvesting Characteristics of Hard PZT Interdigitated Electrode (IDE) Unimorph Cantilever)

  • 이민선;김창일;윤지선;박운익;홍연우;조정호;백종후;박용호;장용호;최범진;정영훈
    • 한국전기전자재료학회논문지
    • /
    • 제30권8호
    • /
    • pp.501-507
    • /
    • 2017
  • A unimorph piezoelectric cantilever generator with an interdigitated electrode (IDE) was developed for vibration energy harvester applications driven in the longitudinal mode. Hard lead zirconate titanate (PZT) ceramic with a high $Q_m$ of 1,280 was used as the piezoelectric active material. Ten PZT sheets produced by tape casting were laminated and co-fired with an Ag/Pd IDE at $1,050^{\circ}C$ for 2 h. The approximately $280{\mu}m$-thick co-fired PZT laminate with the IDE was attached to a stainless steel substrate with an adhesive epoxy for the fabrication of an IDE unimorph cantilever. Its energy harvesting characteristics were evaluated: an output power of $1.1{\mu}W$ at 120 Hz across the resistive load of $700k{\Omega}$ was obtained, corresponding to a normalized power factor of $4.1{\mu}W/(G^2{\cdot}cm^3)$.

기판온도와 열처리 온도에 따른 CuInSe2 박막의 특성분석 (A Study on Properties of CuInSe2 Thin Films by Substrate Temperature and Annealing Temperature)

  • 양현훈;정운조;박계춘
    • 한국전기전자재료학회논문지
    • /
    • 제20권7호
    • /
    • pp.600-605
    • /
    • 2007
  • Process variables for manufacturing the $CuInSe_2$ thin film were established in order to clarify optimum conditions for growth of the thin film depending upon process conditions (substrate temperature, sputtering pressure, DC/RF Power), and then by changing a number of vapor deposition conditions and Annealing conditions variously, structural and electrical characteristics were measured. Thereby, optimum process variables were derived. For the manufacture of the $CuInSe_2$, Cu, In and Se were vapor-deposited in the named order. Among them, Cu and In were vapor-deposited by using the sputtering method in consideration of their adhesive force to the substrate, and the DC/RF power was controlled so that the composition of Cu and In might be 1 : 1, while the surface temperature having an effect on the quality of the thin film was changed from $100^{\circ}C\;to\;300^{\circ}C$ at intervals of $50^{\circ}C$. The diffract fringe of X-ray, which depended upon the substrate temperature and the Annealing temperature of the manufactured $CuInSe_2$ thin film, was investigated. scanning electron microgaphs of represents a case that a sample manufactured at the substrate temperature of $100^{\circ}C$ was thermally treated at $200{\times}350^{\circ}C$. As a result, at $500^{\circ}C$ of the Annealing temperature, their chemical composition was measured in the proportion of 1 : 1 : 2. It could be known that under this condition, the most excellent thin film was formed, compared with the other conditions.