• 제목/요약/키워드: adhesive power

검색결과 149건 처리시간 0.036초

이온 플레이팅에서 기판 BIAS 전위와 이온 에너지 분포와의 상관관계 연구 (A Study on the Relationships between Substrate Bias Potential and Ion Energy Distributions)

  • 성열문;신중홍;손제봉;조정수;박정후
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 추계학술대회 논문집 학회본부
    • /
    • pp.472-474
    • /
    • 1995
  • A Sputter ion Plating(SIP) system with a r.f. coil electrode and the Facing Target Sputter(FTS) source was designed for high-quality thin film formation. The rf discharge was combined with DC facing target sputtering in order to enhance ionization degree of a sputtered atoms. The energy of ions incident on the substrate depended on the health potential of DC biased substrate. The mean impact ion energy increased with negative bias voltage and rf power. The adhesive force of the TiN film formed was in the range of 30$\sim$50N, and markedly influenced by substrate bias voltage.

  • PDF

살사 재료가 고속차량(KTX) ATC 신호에 미치는 영향분석 (Influence analysis to the ATC signal by using sand on the rail in the High-speed Train(KTX))

  • 윤차중;이해재;조용기;김진규;최선규
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 춘계학술대회 논문집
    • /
    • pp.755-764
    • /
    • 2008
  • When the high speed train (KTX) departs from station in the high-speed line, sometimes on board signal disappears, which causes a hindrance of the operation punctuality, therefore, we have a research objective to verify the causes of hindrance and to find an improvement plan. In the process of research, when train left, we applied sand on the rail to improve adhesive power, whose sand has an effect on the ATC(Automatic Train Control) signal wave. We detected & analyzed signal waves which came from detecting device by changing operation condition in accordance with sand material

  • PDF

고속차량(KTX) ATC 신호에 미치는 살사재료별 영향 분석 (The Analysis of Influence on High-speed Train(KTX) ATC Signals according Sand Materials)

  • 윤차중;노명규
    • 전기학회논문지
    • /
    • 제63권6호
    • /
    • pp.834-840
    • /
    • 2014
  • When the high speed train (KTX) departs from station in the high-speed line, intermittent on-board signal disappearance causes a hindrance of the operation punctuality. Therefore, we have a research objective to verify the causes of hindrance and to find an improvement plan. process of research, when train leaves the station, we applied sand on the rail to improve adhesive power, that sand has an effect on the ATC(Automatic Train Control) signal wave. We detected & analyzed signal waves which is came from detecting device by changing operation condition in accordance with sand material overage detection to be achieved.

Analysis of Cell to Module Loss Factor for Shingled PV Module

  • Chowdhury, Sanchari;Cho, Eun-Chel;Cho, Younghyun;Kim, Youngkuk;Yi, Junsin
    • 신재생에너지
    • /
    • 제16권3호
    • /
    • pp.1-12
    • /
    • 2020
  • Shingled technology is the latest cell interconnection technology developed in the photovoltaic (PV) industry due to its reduced resistance loss, low-cost, and innovative electrically conductive adhesive (ECA). There are several advantages associated with shingled technology to develop cell to module (CTM) such as the module area enlargement, low processing temperature, and interconnection; these advantages further improves the energy yield capacity. This review paper provides valuable insight into CTM loss when cells are interconnected by shingled technology to form modules. The fill factor (FF) had improved, further reducing electrical power loss compared to the conventional module interconnection technology. The commercial PV module technology was mainly focused on different performance parameters; the module maximum power point (Pmpp), and module efficiency. The module was then subjected to anti-reflection (AR) coating and encapsulant material to absorb infrared (IR) and ultraviolet (UV) light, which can increase the overall efficiency of the shingled module by up to 24.4%. Module fabrication by shingled interconnection technology uses EGaIn paste; this enables further increases in output power under standard test conditions. Previous research has demonstrated that a total module output power of approximately 400 Wp may be achieved using shingled technology and CTM loss may be reduced to 0.03%, alongside the low cost of fabrication.

다층 액정폴리머 기판을 이용한 Ka대역 탐색기용 송수신 모듈 (Transmit-receive Module for Ka-band Seekers using Multi-layered Liquid Crystal Polymer Substrates)

  • 최세환;유종인;이재영;이지연;남병창
    • 한국인터넷방송통신학회논문지
    • /
    • 제20권5호
    • /
    • pp.63-70
    • /
    • 2020
  • 본 논문에서는 35 GHz 대역의 군 탐색기용 송수신 모듈을 설계 및 제작하였다. 밀리미터파 대역의 기판 성능과 집적도를 높이기 위해, 4층 액정 폴리머 기판을 개발하였다. 4층 액정 폴리머 기판은 3장의 FCCL 기판과 2장의 접착층으로 구현되었으며, 적층을 위해 기판간의 녹는 점 차이를 이용한 공정을 이용하였다. 스트립선로와 마이크로스트립 선로를 이용하여 기판의 길이에 따른 전송손실을 확인하였고, 35 GHz 대역의 전력분배기를 통해 액정폴리머 기판의 성능을 검증하였다. 이러한 기판을 이용하여 전력증폭기와 저잡음증폭기와 같은 송수신모듈을 구성하는 개별 블록에 대한 성능을 확인한 후, 단일 채널 Ka대역 송수신모듈을 4층 액정 폴리머 기판을 이용하여 개발하였다. 제작한 송수신모듈의 송신출력은 펄스 Duty 10%에서 1.1W 이상, 수신 잡음지수는 8.5 dB 이하, 수신 이득은 17.6 dB 이상의 수신 특성을 갖는다.

PVC 바닥상재용 광경화형 내오염 코팅액의 제조 및 응용에 관한 연구 (A study on the Manufacture and Application of UV-Cured Anti-stain Coating Compounds for PVC Tile)

  • 윤현정;하진욱
    • 한국산학기술학회논문지
    • /
    • 제11권5호
    • /
    • pp.1741-1746
    • /
    • 2010
  • 본 연구는 건축자재로 널리 사용되는 PVC 바닥상재 표면을 오염성 및 정전기로부터 보호하기 위하여 기존에 사용하는 광경화형 우레탄-아크릴 수지에 내오염/대전성을 향상시킨 광경화형 내오염 코팅액 개발에 관한 것이다. PVC 바닥상재용으로 사용되는 내오염성이 없는 우레탄-아크릴 수지에 4가 암모늄을 사용한 수용성 대전방지제와 아크릴용 대전방지제, 폴리우리탄용 대전방지제를 수지의 양 대비 함량(wt%) 5~20%로 변화하여 첨가한 후 배합하여 수지의 내오염/대전성을 향상시킨 내오염 코팅액을 제조하였다. 제조한 내오염 코팅액은 코팅 층의 두께조절이 가능한 코팅(Bar-coating)을 사용하여 PVC 바닥상재에 코팅 한 후 내오염성, 대전성, 부착력, 코팅두께 등의 코팅 층 표면물성을 평가하였다. 연구결과, 수지에 수용성대전방지제 15%를 혼합하여 제조한 코팅액을 Bar-coater No.12로 코팅한 코팅표면이 전기저항($3.24{\times}10^9{\Omega}/cm^2$), 내오염도(매직 Test, 먼지부착 Test) 및 부착력(100%) 모두 가장 좋은 물성을 보였다. 전반적으로 함량이 많을수록 전기저항과 오염도에서 우수한 것으로 나타났다. 그러나 대전방지제가 과량으로 들어간 경우 migration 현상이 보이는 것을 알 수 있었다.

고강도 콘크리트 폭렬제어를 위한 PFB(POSCO E&C Fire Board) 공법의 현장 시공성에 관한 연구 (Study on Work-Efficiency in feild of PFB(POSCO E&C Fire Board) for High Sterength Concrete Spalling Control)

  • 김우재;박동천;양완희;이세현
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.961-964
    • /
    • 2008
  • 국내 건설사 및 학계에서는 현재 사회적 문제로 대두되고 있는 화재시 고강도 콘크리트의 안전성 확보를 위한 연구를 진행 중에 있으며, 본 연구소에서도 폭렬 방지 공법인 PFB 공법을 개발하였다. PFB 공법은 POSCO E&C Fire Board 공법으로 무기질계 내화 보드를 접착제로 현장에 시공하는 공법으로 기존 연구에서 3시간 내화시험을 실시한 결과 주근 온도가 200도 이하로 유지되었으며, 콘크리트 및 내화보드에 폭렬 및 기타 손상이 발생되지 않았다. 이에 본 연구에서는 PFB 공법을 현장에 적용하기 위해 실물크기의 목업 시험체(2층 무량판 구조, Span 8m)를 제작하여 내화보드의 현장가공성, 현장 부착강도 시험, 나사못 인발 저항 시험 등을 실시함으로써, 현장 시공전에 기본적으로 검토할 내용에 대한 시험을 실시하였다. 시험결과 PFB 공법은 현장 시공성 및 가공성이 우수한 것으로 조사 나타났고, 구조체 콘크리트와의 부착성능 및 일반 석고보드 대비 나사못 인발시험 성능도 우수한 것으로 조사되어 현장 적용시 문제점은 없는 것으로 조사되었다.

  • PDF

PVC 바닥상재용 광경화형 하드 코팅액의 제조 및 응용에 관한 연구 (Formulation and Application of UV-Cured Hard Coating Compounds for PVC Tile)

  • 박보람;윤현정;조홍;하진욱
    • 한국산학기술학회논문지
    • /
    • 제10권9호
    • /
    • pp.2396-2401
    • /
    • 2009
  • 본 연구는 건축자재로 널리 사용되는 PVC 바닥상재의 표면을 스크래치로부터 보호하기 위하여 기존에 사용하는 광경화형 우레탄-아크릴 수지에 내마모성을 향상시킨 광경화형 하드 코팅액 개발에 관한 것이다. PVC 바닥상재용으로 사용되는 내마모성이 없는 우레탄-아크릴 수지에 $Al_2O_3$(Al-160SG-3), $Al(OH)_3$(SH-8W) 및 $SiO_2$(KS-5000) 등 서로 다른 내마모성을 지닌 물질을 분말 형태로 수지의 양 대비 함량(wt%)을 $10{\sim}30%$로 변화하여 첨가한 후 링밀(Ring Mill)을 사용, 배합하여 수지의 내마모성을 향상시킨 하드 코팅액을 제조하였다. 제조한 하드 코팅액은 코팅층의 두께조절이 가능한 코팅(Bar-coating)을 사용하여 PVC 바닥상재에 코팅 한 후 내마모성, 연필경도, 부착력, 코팅두께 등의 코팅층 표면물성을 평가하였다. 연구결과, 수지에 $Al_2O_3$ 분말 30%를 혼합하여 제조한 하드 코팅액이 내마모성 1등급, 연필경도 H, 부착력 100%로 가장 좋은 물성을 보였으며, 전반적으로 입자크기가 작고, 분말 함량이 많을수록 또한 코팅두께가 두꺼워 질수록 경도 및 내마모성이 우수한 것으로 나타났다.

고효율 및 고출력 태양광 모듈을 위한 셀 스트링 연구 (A Study on the Cell String for High Efficiency and High Power Photovoltaic Modules)

  • 박지수;황수현;오원제;이수호;정채환;이재형
    • 한국전기전자재료학회논문지
    • /
    • 제31권5호
    • /
    • pp.295-299
    • /
    • 2018
  • In this work, we conducted a study on cell strings of high efficiency and high power solar cell modules via simulation. In contrast to the conventional module manufacturing method, the simulation was performed by connecting cutting cells divided into four parts from 6-in size using the electrically conductive adhesive (ECA). The resistance of the ECA added in series connection was extracted using an experimental method. This resistance was found to be $3m{\Omega}$. Based on this simulation, we verified the change in efficiency of the string as a function of the number of cutting cell connections. Consequently, the cutting cell efficiency of the first 20.08% was significantly increased to 20.63% until the fifth connection; however, for further connections, it was confirmed that the efficiency was saturated to 20.8%. Connecting cutting cells using ECA improves the efficiency of the string; therefore, it is expected that it will be possible to fabricate modules with high efficiency and high power.

신경가동운동과 견갑골 자세교정운동이 오십견 환자에게 미치 는 영향 (Effects of Nerve Mobilization Exercise and Scapula Postural Correction Exercise for Adhesive Capsulitis Patients)

  • 정민근;김유리;김완기;전재국
    • 대한정형도수물리치료학회지
    • /
    • 제24권1호
    • /
    • pp.57-65
    • /
    • 2018
  • Background: This study examined the effects of nerve mobilization exercise and scapula postural correction exercise and scapula postural correction exercise after applying conservative physical therapy to frozen shoulder. Methods: Thirty-four outpatients were divided into a nerve mobilization exercise and scapula postural correction exercise group and scapula postural correction exercise group. Each group performed its own exercise 30 minutes per day, three times per week, for 6 weeks. Pain intensity was measured by the visual analogue scale. Range of motion was measured by the goniometer. The scapular position was measured by scapular index. Grasping power was measured by the Grip Track Commander. Measurements were made at baseline and six weeks after the intervention. Results: the visual analogue scale, range of motion (except lateral rotation), and grasping power for each group showed significant changes at baseline and six weeks after the intervention (p<.05). Significant differences were also evident between the two groups for these three measurements (p<.05). Conclusions: Nerve mobilization exercise & scapula postural correction exercise is more effective than scapula postural correction exercise for reducing pain intensity and increasing grasping power, scapular index and range of motion (except lateral rotation) in frozen shoulder syndrome patients.