• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3411-3414
• /
• 2010

• 디지털콘텐츠학회 논문지
• /
• 제5권4호
• /
• pp.311-315
• /
• 2004

본 논문에서는 이산 웨이블릿 변환(DWT)영역에 인간의 시각시스템(HVS)용소를 적용한 압축에 강인한 디지털 워터마킹 알고리즘을 제안하였다 전처리과정으로 3-Levl DWT를 수행한 후, 주파수 계수의 공간적인 특성을 고려하여 워터마크를 삽입하였다. 최적의 워터마크삽입영역 선택을 위하여 영상의 명암대비도와 텍스처 특징을 파라미터로 실정하여 퍼지추론기를 설계하였다. 삽입되는 워터마크는 시각적으로 인지가 가능한 특정 로고 형태의 이진 영상을 사용하였고, 실험결과 JPEC 압축비율 $70\%$까지 $90\%$이상의 상관관계를 보였다.

• 한국응용과학기술학회지
• /
• 제6권1호
• /
• pp.15-19
• /
• 1989

The oxidative stability of palm oil with moisture addition during heationg was investigated and the antioxidant effects of tocopherol, citric acid and sodium polyphosphate were evaluated. The addition of natural tocopherol up to 200 ppm level did not improve the oxidative stability of palm oil with moisture (1m1 $H_2O$ additive to 200g of oil at $180^{\circ}C$). The maximum antioxidant effect was observed at the Concentration of 400 ppm. Addition of citirc acid did not influence the effective concentration of tocopherol. Whereas addition of sodium polyphosphate and citric acid increased the antioxidant effect of tocopherol. The maximum synergistice effect was observed at the concentrations of 50 ppm citric acid and 50 ppm of sodium polyphosphate. Addition of 50 ppm citric acid and 50 ppm sodium polyphosphate to 100 ppm of tocopherol exceeded the antioxidant effect of 400 ppm tocopherol alone.

• 한국주조공학회지
• /
• 제6권2호
• /
• pp.93-103
• /
• 1986

It is very important to obtain wear resistant ductile iron by adding more economical alloying elements. In this study, 10 heat of Mg-treated ductile iron were made according to Sb content (0-0.1% Sb). Each melt was tasted to 30 ${\o}test$ bars in $CO_2$ mold under the same condition and inspected wear characteristics, mechanical properties and microstructures. The results obtained from this study are as follows; 1. It is confirmed that Sb should be a simple and useful additive for improving wear resistance in ductile iron. 2. Hardness of ferrite and pearlite is improved with increasing Sb amount in ductile iron. 3. For ductile iron, the recommended ladle addition of Sb amount is to 0.02-0.03%. 4. Sb has adverse influence on spheroidizing of graphite if the amount is over 0.04%.

• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.359-364
• /
• 1991

The effects of Pb5Ge3O11 on the sinterbility and lattice variation of the semiconducting 0.15 mol% Y2O3 doped BaTiO3 have been investigated as functions of additive contents (from 0.25 mol% to 2.5 mol%) and sintering temperatures (from 110$0^{\circ}C$ to 130$0^{\circ}C$). As the amount of Pb5Ge3O11 increases, the sinterbility of BaTiO3 increases abruptly at around 115$0^{\circ}C$. During the sintering, the most of Pb+2 ions in additives penetrate into BaTiO3 lattices and Ge+4 ions present at grain boundaries. Therefore the c lattice of the BaTiO3 increases largely and then the tetragonality increases due to the diffusion of the Pb+2 ions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.216-219
• /
• 2003

In this paper, we present performance analysis of an IEEE P802.15.3a high rate wireless personal area network transceiver. This physical layer standard uses QOSK as its sub-channel modulation scheme and orthogonal frequency domain modulation (OFDM) for sub-bands. OFDM is used for each sub-band so that multi-path effects are absorbed by equalizer and guard, and fading can be approximately modeled as additive white Gaussian noise. In multi-band ultra-wideband system, DAC quantization error is important noise source since high resolution conversion cannot be used due to high power consumption. Simulation result shows that, to get 640-Mbps throughput, at least 5-bits precision is necessary to maintain bit-error rate under 10$\^$-2/, which can be lowered, with channel coding, to 10$\^$-6/ that is the bit-error rate required by IEEE 802.15 upper protocol layer, in 4-meter LOS fading channel.

• 대한전기학회논문지
• /
• 제35권1호
• /
• pp.17-25
• /
• 1986

Discussions on this paper are related to the effects of organic materials to treeing phenomena of low density polyethylene. As additives, 11 kinds of organic compounds are selected by considering the respective features such as melting point, boiling point, electron affinity as well as molecular structure, and then the specimens of low density polyethylene are prepared by blending with 10wt% of the selected additives. For the comparison of effectiveness of treeing resistance and interpretation of the mechanism of compounds as treeing retardants, several investigations such as the tree acceleration test, the prestressed test and the measurement of internally occurred partial discharge are carried out. As the results, meta-Cresol is regard as the most effective retardant among those, and it is supposed that this aromatic compound to be comprised of radical having large electron affinity has strong capability to accept energetic electron to prevent or delay the growth of discharge streamer. Furthermore, by activating partial discharge at the wall of tree pit through the function of trapped electron at this material, the gas pressure in the pit is increased up to prevent the growth of streamer.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.101-105
• /
• 2009

The purpose of this study is to reduce autogenous shrinkage of high-strength concrete. Previous studies were investigated to measure the effects of reductions to autogenous shrinkage when applying bean oil to concrete. The results of the study showed that as the mixture rate of BO increased, fluidity decreased and air quantity decreased slightly. In early age, compressed strength increased compared to Plain while decreased in long-term age. As an autogenous shrinkage characteristic, reduction effect increased according to increase in mixture rate. When mixture rate is 1%, approximately 30% decreased compared to Plain in BO. At 2%, BO decreased by about 32%. In addition, in the case of BO, autogenous shrinkage was shown to decrease compared to expansive additive and shrinkage-reducing agent.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1510-1515
• /
• 2004

The effects of additive ions on the generation of metallic nanoparticles were evaluated using a corona induced supersonic nozzle. Applying the corona discharge to the nanoparticle generator, a tungsten needle and the supersonic nozzle are used as an anode electrode and a cathode electrode respectively. The corona ions act as nuclei for the silver vapor condensation. The ion density was controlled precisely as varying the applied voltage between electrode and nozzle. The mean diameter of the silver particle decreases as the ion density increases. However, the number concentration of the silver particle tended to increase with the ion density. The size distribution is more uniform as the ion density increases.

• 약학회지
• /
• 제56권5호
• /
• pp.320-325
• /
• 2012

To develop a new effective and safe natural antibiotics and antioxidant the essential oil was extracted from the roots of Anthriscus sylvestris by steam distillation. Its composition was analyzed by GC-MS. The activities of the essential oil fraction and its main components were evaluated against antibiotic-susceptible and -resistant strains of some food-born bacteria. In addition the synergism was examined with this oil combined with antibiotic by checkerboard titer test. The antioxidant activities were determined by in 1,1-diphenyl-2-picryl-hydrazil (DPPH) free radical scavenging activity test and reducing power assay. The essential oil fraction of A. sylvestris revealed significant inhibiting activities against antibiotic-susceptible and -resistant species of Vibrio and Shigella with MICs ranged from 1.00~4.00 mg/ml. It showed synergistic or additive effects when it was combined with amphicillin or trimethoprim/sulfamethoxazole (1 : 9). Additionally, the essential oil fraction of A. sylvestris exhibited significant DPPH free radical scavenging activity and the reducing power.