• Journal of the Korean Magnetics Society
• /
• v.15 no.3
• /
• pp.198-201
• /
• 2005

We investigated the effects of organic additives on the properties of nickel-copper thin films prepared by electroplating. Compared with thin films fabricated by pure electrolyte only, the films utilizing organic additives show different crystalline orientations. With no alteration of plating conditions simply adding the organic materials changed the composition of copper and nickel. The concentration of nickel could be varied to $65-95\%$ depending on the species and concentration of the additives. The change of material property has contributed to the increase or decrease of the magnetoresistance.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.4
• /
• pp.409-415
• /
• 2016

Magnetite particles were synthesized by co-precipitation of water-soluble 밀 스케일-derived precursor by various concentrations of (0.5, 0.67, 1, 2 N) NaOH and (0.6, 0.8, 1.2, 2.4 N) $NH_4OH$. It is theoretically known that as the concentration of the alkaline additive used in iron oxide synthesis increases, the particle size distribution of that iron oxide decreases. This trend was observed in both kind of alkaline additive used, NaOH and $NH_4OH$. In addition, the magnetite synthesized in NaOH showed a relatively smaller particle size distribution than magnetite synthesized in $NH_4OH$. Crystalline phase of the synthesized magnetite were determined by X-ray diffraction spectroscopy(XRD). The particles were then used as an adsorbent for phosphate(P) removal. Phosphorus adsorption was found to be more efficient in NaOH-based synthesized magnetite than the $NH_4OH$-based magnetite.

• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.143-150
• /
• 2011

Copper electroplating has been applied to various fields such as decorative plating and through-hole plating. Technical realization of high strength copper preplating for wear-resistant tools and molds in addition to these applications is the aim of this work. Brighters and levelers, such as MPSA, Gelatin, Thiourea, PEG and JGB, were added in copper sulfate electrolyte, and the effects of these organic additives on the hardness were evaluated. All additives in this work were effective in increasing the hardness of copper electrodeposits. Thiourea increased the hardness up to 350 VHN, and was the most effective accelarator in sulfate electrolyte. It was shown from the X-ray diffraction analysis that preferred orientation changed from (200) to (111) with increasing concentration of organic additives. Crystallite size decreased with increasing concentration of additive. Hardness was increased with decreasing crystallite size, and this result is consistent with Hall-Petch relationship, and it was apparent that the hardening of copper electrodeposits results from the grain refining effect.

• Journal of Korean Society on Water Environment
• /
• v.30 no.4
• /
• pp.403-408
• /
• 2014

The toxicity of heavy metals (Zn, Pb) and diesel, in single and binary solution was investigated using the photobacterium Vibrio fischeri (Microtox test) as a test organism. In this experiment, the concentration of water soluble fraction of diesel was based on the total petroleum hydrocarbon (TPH). The toxicity of each single compound showed the following $EC_{50}$ (15min): Zn 1.90 mg/L, Pb 0.31 mg/L, TPH 2.09 mg/L. The observed toxicity of binary mixtures increased, depending on the concentration of the mixed substance. The effects were defined as synergistic, antagonistic, or additive, in accordance with the sign of difference between the predicted and observed toxicity at binary mixtures. The interactive effects between zinc and lead were synergistic, on the other hand, antagonistic and additive effects were found in each metal and TPH mixtures on the bioluminescence of V. fischeri.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.3
• /
• pp.330-337
• /
• 1996

The effects of pump and temperature on drag reducing characteristics were investigated with a polymer(PAAM : Polyacrylamide) and three kinds of surfactants(CTAC, STAC, Habon-G) in fully developed turbulent pipe flows with various experimental parameters such as additive concentration(30~500ppm), pipe diameter(4.65mm, 10.85mm), Reynolds number($4{\times}10^4{\sim}10^5$) and working fluid temperature($20{\sim}80^{\circ}C$). The pump effect on PAAM was severe such that the drag reduction rates obtained with pump were decreased upto 30% as compared with those obtained with compressed air in 4.65mm test section. The temperature effect on PAAM was noticeably considerable, that is, the higher temperaute, the less drag reduction rate. On the other hand, no significant pump effect on the surfactants was observed. The drag reducing effectiveness of CTAC was totally lost in the temperature ragne of 60 to $80^{\circ}C$, whereas STAC and Habon-G kept their distinct drag reducing capability at a temperature of $80^{\circ}C$. This study clearly elucidated that for DHC application of drag reducing additives, the pump and temperature effects as well as additive concentration and pipe diameter should be carefully taken into consideration.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.640-644
• /
• 1997

We investigated that how both the type and the concentration of coal and the surfactant and the electrolyte added to increase the fluidity of CWM influence rheological characteristics. According to the type of coal, the viscosity of CWM was increased with increasing O/C ratio. Also, the CWM was represented the property of non-Newtonian fluid, having yield stress which was linerarly increased with increasing coal concentration. According to the surfactant used as an additive, the rheological characteristics of CWM was represented the pseudoplastic property as n<1 without relating to the concentration of added surfactants. Also, according to the increase of the amount of electrolyte, n was nearly approached 1. Therfore, we found that CWM opproched Newtonian fluid and that when more than 0.05wt.% of electrolyte were added, yield stress was not shown up.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.104-104
• /
• 2002

This study was performed to find out the optimal larval stage among trochophore, D-shaped and umbo stage larvae and the desirable protective additive such as fructose, glucose, sucrose and trehalose with cryoprotectant for cryopreservation of surf clam, Spisula sachalinensis larvae. Dimethyl sulfoxide and ethylene glycol were used as cryoprotectant and each cryoprotectant was made to 2.0 M with previous protective additives. The larvae were immersed in the preparations waited for 15 minutes to reach equilibration, and then frozen in a program freezer (-35$^{\circ}C$) and liquid nitrogen (-196$^{\circ}C$). The freezing rate of 1.0$^{\circ}C$ /min. was used for cryopreservation of trochophores before seeding temperature (-12$^{\circ}C$). The survival rate of frozen-thawed larvae increased as larval developing and that of umbo stage larvae was the highest as 96.1 ${\pm}$ 1.0%. The presence of lower concentration of disaccharides as sucrose or trehalose significantly enhanced survival rate when mixed with cryoprotectants (P<0.05). The results of our study indicate that desirable developmental stages of larvae and protective additive for cryopreservation are the umbo stage larvae and 0.2 M sucrose, respectively.

• Molecules and Cells
• /
• v.19 no.1
• /
• pp.143-148
• /
• 2005

Heptaplatin, cis-malonato [(4R,5R)-4,5-bis (amino-methyl)-2-isopropyl-1,3-dioxolane] platinum(II) (SKI-2053R, Sunpla) is a new platinum derivative with antitumor activity comparable to cisplatin on various cancer cell lines. Preclinical studies suggest that it is less nephrotoxic than cisplatin. This study was undertaken to examine the combined effect of heptaplatin and ionizing radiation on two established human squamous carcinoma cell lines (NCI-H520, SQ20B). The cytotoxic activity of heptaplatin was concentration-dependent in both cell lines. When low dose heptaplatin was combined with high dose ionizing radiation, there was an additive cytotoxic effect on NCI-H520 cells (P < 0.05), while a moderate dose of heptaplatin and a low dose of ionizing radiation had an additive cytotoxic effect on the growth of SQ20B cells (P < 0.05). FACS analysis and DAPI staining showed that their additive cytotoxic effects were correlated with the induction of apoptosis. Further studies are warranted using heptaplatin and ionizing radiation in squamous cell carcinoma as a substitute for cisplatin.

• Macromolecular Research
• /
• v.14 no.3
• /
• pp.348-353
• /
• 2006

For enhancing the gene delivery efficiency of polyplexes, a new formulation was developed using PEI conjugated Pluronic F127 copolymer as an effective additive. Low molecular weight, branched polyethylenimine Mw 600 (LMW BPEI 600) was conjugated to the terminal end of Pluronic F127. The PEI-modified Pluronic copolymers formed a micellar structure in aqueous solution, similar to that of unmodified Pluronic copolymer. PEI modification of Pluronic copolymer increased the size of micelles while concomitantly raising the critical micelle concentration (CMC). The PEI-modified Pluronic copolymer was used as a micellar additive to enhance the gene transfection efficiency of pre-formulated polyelectrolyte complex nanoparticles composed of luciferase plasmid DNA and branched PEI Mw 25k (BPEI 25k) or polylysine Mw 39k (PLL 39k). The luciferase gene expression levels were significantly enhanced by the addition of the BPEI-modified Pluronic copolymer for the two formulations of BPEl and PLL polyplexes. The results indicated that the BPEI-modified Pluronic copolymer micelles ionically interacted on the surface of DNA/BPEI (PLL) polyplexes which might facilitate cellular uptake process.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2109-2111
• /
• 2005

The effect of arc like streamer discharge is investigated on the hydrogen generation in the plasma reactor with multineedle - plate electrode geometry and SDR (Plasma reactor using the surface discharge). An additive of the two type (the saw type and the pellet type) was placed under the water surface to investigate the effect of the water surface conditions. The experimental results are compared in case of the reactor with and without an additive on the water surface. The generation of arc streamer discharge is more powerful with increasing applied voltage in the saw type. The maximum hydrogen Production concentration is about 4300 ppm at 74W in the SDR with additive of the saw type. Also, the Energy yield of the SDR (28990 g/kWh, 4300ppm, 74W) is higher than of the multineedle - plate electrode geometry (20892g/kWh, 3300ppm, 77W).