• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.236-237
• /
• 2014

Recently, it changes to the frame construction in the wall type structure for the life span improvement of the apartment house of our country. The execution of the light panel increased while the execution of the frame construction increased. Therefore, the density and absorption ratio of the magnesium oxide matrix according to the wood flour amount of addition ratio property try to be analyze for the lightweight of the surface material of the light panel. The test result, the density has been declined as the addition ratio increase of the wood flour. In the case of the water absorption ratio, water absorption ratio has been increased as addition ratio increase of wood flour. However, wood flour addition ratio 15% determined the most appropriate when considering the density and water absorption ratio.

• 한국세라믹학회지
• /
• 제42권8호
• /
• pp.588-592
• /
• 2005

The effect of SiC additive on the densification behavior and microstructural change of $TiB_2$ ceramics was investigated. The infiltration and direct mixing with polycarbosilane (PCS), which was converted to SiC by pyrolysis during sintering, were used for the addition of SiC. The addition of Fe enhanced the densification of $TiB_2$, but which resulted in exaggerated grain growth. However, the addition of PCS enhanced the densification and suppressed the exaggerated grain growth of $TiB_2$. Moreover, the addition of PCS using direct mixing was more effective for suppress of grain growth as compare to the addition of PCS using infiltration.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.453-460
• /
• 1997

Sr-ferrite having magnetoplumbite structure is similar to Ba-ferrite in magnetic characteristics, but better magnetic characteristics for using motor application. To improve remanence magnetic flux density(Br) and coercive force(iHc), it is necessary that sintered ferrites must have high density and grain size less than 1 $\mu$m. By varying n values in SrO.nFe2O3 basic composition, calcination temperature, and BaO addition, Sr-ferrite powder and sintered specimen was prepared. The n values, calcination temperature, and BaO addition affected secondary phase formation, particle size, and particle shape. BaO addition enhanced Fe2O3 secondary phase and hexagonal shape particle. Fe2O3 phase reduced sintered density which greatly decreased Br.

• 한국주조공학회지
• /
• 제8권4호
• /
• pp.459-466
• /
• 1988

This study was carried out in the austempering temperature and time after Ni, Mo addition in purpose of modification of impact toughness of austempered ductile irons. Addition of alloy element and austempering treatment of $900^{\circ}C$ 60 minutes followed by $300^{\circ}C$, $350^{\circ}C$ and $400^{\circ}C$ for 60 minutes, in this case impact value was increased by ideal mixed structure. But impact value was decreased when holing time is 120minutes, this is attributed to segregation and carbide precipitation from high carbon austenite. Highest impact value was obtained by $350^{\circ}C$ (Mo-addition) and $400^{\circ}C$ (Ni-addition). This phenomena was caused by presence of remained austenite. At all austempering temperature,, Ni-added specimen showed higher impact values than that of Mo-added specimen. And hardness property was affected by austempering temperature and holding time rather than amounts of alloying element.

• 한국주조공학회지
• /
• 제15권6호
• /
• pp.558-565
• /
• 1995

Effects of high Si-P addition on microstructure and mechanical properties of thin ductile cast iron have been investigated. The amount of silicon addition have fixed on 4.0wt% and the amounts of phosphorus addition and thickness of specimen have been varied from 0.05 to 0.8wt% and ${\phi}13mm$, ${\phi}10mm$ and ${\phi}6mm$, respectively. As the casting thickness decreased, the average diameter of spheroidal graphite was decreased and the hardness of the cast iron increased. By adding P, the average diameter of spheroidal graphite was increased and the count of the spheroidal graphite was decreased continuously. And the tensile strength and the elongation was decreased, and the hardness was increased. With the P added more than 0.2wt%, the abraded amount was decreased significantly. The addition of P improved the wear resistance and the hardness of thin ductile cast iron.

• 한국식품영양학회지
• /
• 제22권3호
• /
• pp.443-448
• /
• 2009

In this study, we investigated the effects of sweeteners on the quality of Kakdugi through the addition of 1.8% sugar, 0.006% sodium saccharin or 0.006% stevioside using a physicochemical test and sensory evaluation during fermentation at $20^{\circ}C$. The addition of sugar to Kakdugi resulted in the lowest pH and the highest total acidity relative to the control and experimental groups during the fermentation period. The number of lactic acid microorganism gradually increased and then decreased. The sensory evaluation revealed that the addition of sodium saccharin to Kakdugi resulted in the highest sweet smell and taste followed by the addition of stevioside. The addition of sodium saccharin to Kakdugi showed the highest sweet taste and the best texture, and the sweetness compensated for the sour smell and taste.

• 대한화학회지
• /
• 제16권4호
• /
• pp.232-240
• /
• 1972

Ethylacrylate에 대한 n-butylmercaptan의 첨가반응속도상수를 iodometry로 측정하여 넓은 pH범위에서 잘 맞는 속도식을 구하였다. 이 식에 의하면 pH 4 이하에서는 n-butylmercaptan분자가 첨가하여 pH 7 이상에서는 n-butylmercaptide ion이 첨가함을 알 수 있고 pH 4∼7 사이에서 일어나는 복잡한 첨가반응 메카니즘도 이 식으로 잘 설명 될 수 있음을 알았다.

• 대한화학회지
• /
• 제12권3호
• /
• pp.106-113
• /
• 1968

여러 酸性溶媒 속에서 3,4-methylenedioxy-${\beta}$-nitrostyrene에 대한 n-butylmercaptan의 親核性 添加反應速度常數를 측정하여 넓은 pH범위에서 잘 맞는 反應速度式을 구하였다. 이 식에 의하면 pH3이하에서는 mercaptan분자가 첨가하며 pH6이상에서는 mercaptide ion이 첨가함을 알 수 있고 이 중간 pH범위에서 일어나는 복잡한 반응 메카니즘도 이 식에 의해 정량적으로 잘 설명할 수 있음을 알았다.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.46-57
• /
• 1996

The direct injection stratified charge(DISC) engine enhances the fuel tolerance and the antiknock tendency. This enhanc3d antiknock tendency allows use of a higher compression ratio which results in higher thermal efficiency. But its actual utilization is prevented by high emission combustion time and wall quenching will be the main causes of increasing unburned hydrocarbons in DISC system. In order to solve this problem, small aount of hydrogen was added to the charging air or injected fuel. The effects of hydrogen addition were examined experimentally by radial fuel injection using a pancake-type constant volume bomb. In case of the hydrogen addition to the charge of air, the combustion the amount of hydrogen. In case of the hydrogen addition to the fuel, the combustion pressure was significantly increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.280-283
• /
• 2002

In this study, the effects of $Nb_{2}O_{5}$ addition on microstructure and piezoelectric characteristics of PNW-PMN-PZT ceramics were investigated. As $Nb_{2}O_{5}$ addition amount is increased, grain size is gradully decreased. At 0.3wt%$Nb_{2}O_{5}$ addition composition ceramics, maximum density, tetragonality and piezoelectric characteristics were obtained.