• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.1957-1964
• /
• 2010

In Video coding, the first frame is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP for the first frame of GOP affects the first frame as well as the following frames. Traditionally, the initial QP of a GOP is determined by the initial QP of the previous GOP and the average QP of the inter mode frames. In case of JM, the initial QP of a GOP is adjusted as the initial QP being less than the average QP of inter mode frames by two. However, this method is not suitable for the low bit rate video coding. In this paper, the linear relationship between the optimal QP and the ratio of the PSNR of the first frame and the average PSNR of the inter mode frames is first investigated and the linear model is proposed based on the results of the investigation. The proposed model calculate the optimal initial QP using the encoding results of the previous GOP. It is shown by experimental results that the new algorithm can predict the optimal initial QP more accurately and generate the PSNR performance better than that of the existing JM algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.144-153
• /
• 2006

In this paper, we propose an efficient video data transmission protocol using the cross-layer approach in ad hoc networks. Due to node movement, the MANET is frequently changing path and each path has different transmission rate so that it has low performance when transmitters select a constant transmission late at the encoding time. Because MANET is running limited energy, efficient energy management is important because it increases network life time and network throughput. Therefore we need an effective video transmission method that considers physical layer channelstatistics, node's energy status, and network topology changes at the same time unlike the OSI recommendation protocol in that each layer isindependent and hard to transmit adaptively video data according to the network conditions. Therefore, in this paper we propose a cross-layer effective video transmission protocol and mechanism that can select an optimal path using multilayer information such as node's residual energy, channel condition and hop counts and can determine the adequate coding rate adaptively.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.981-984
• /
• 2006

Oil pollution of the ocean is a major environmental problem, especially in its coastal zones. Synthetic aperture radar (SAR) flown on satellites, such as ERS-2 and Envisat, has been proved to be a useful tool in oil spill monitoring due to its wide coverage, day and night, and all-weather capability. The total 120 SAR images containing oil spill over the East China Sea were collected and analyzed, ranging in date from July 23, 2002 to November 11, 2005. After preprocessed, SAR images were segmented by adaptive threshold method. The oil spill images were incorporated into GIS after distinguished from look-like phenomena, finally we presented the oil spills distribution map for the East China Sea. The wide-swath and quick-looks SAR imagery for mapping of oil spill distribution over large marine areas were proved to be useful when full resolution data are not available. After the temporal and spatial distribution of the oil spills were analyzed, we found that most of oil spills were distributed along the main ship routes, which means the illegal discharge by ships, and the occurrence of oil spill detected on SAR images acquired during morning and summer is much higher than during evening and winter.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.2
• /
• pp.85-101
• /
• 2015

Objective: The purpose of this study was to develop and evaluate smart secondary controls using iPad for the drivers with physical disabilities in the driving simulator. Background: The physically disabled drivers face problems in the operation of secondary control devices that accept a control input from a driver for the purpose of operating the subsystems of a motor vehicle. Many of conventional secondary controls consist of small knobs or switches that physically disabled drivers have difficulties in grasping, pulling or twisting. Therefore, their use while driving might increase distraction and workload because of longer operation time. Method: We examined the operation time of conventional and smart secondary controls, such as hazard warning, turn signal, window, windshield wiper, headlights, automatic transmission and horn. The hardware of smart secondary control system was composed of iPad, wireless router, digital input/output module and relay switch. We used the STISim Drive3 software for driving test, customized Labview and Xcode programs for interface control of smart secondary system. Nine subjects were involved in the study for measuring operation time of secondary controls. Results: When the driver was in the stationary condition, the average operation time of smart secondary devices decreased 32.5% in the normal subjects (p <0.01), 47.4% in the subjects with left hemiplegic disabilities (p <0.01) and 38.8% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. When the driver was driving for the test in the simulator, the average operation time of smart secondary devices decreased 36.1% in the normal subjects (p <0.01), 41.7% in the subjects with left hemiplegic disabilities (p <0.01) and 34.1% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. Conclusion: The smart secondary devices using iPad for people with hemiplegic disabilities showed significant reduction of operation time compared with conventional secondary controls. Application: This study can be used to design secondary controls for adaptive vehicles and to improve the quality of life of the people with disabilities.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.6
• /
• pp.479-486
• /
• 2015

A triplet line array has a capability for solving left/right ambiguity problem and high directivity of line array. For this, high computational powers and correlation between nearby sensors must be considered. Hardware powers are dramatically increased, so various adaptive beamforming techniques and signal processing techniques can be adopted for large triplet line array. To investigate the optimum signal processing method and improve the target detection capability, we need to analyze the noise correlation among the triplet line array sensors in real environment. In this paper we analyze the experimental data in the East Sea, investigate noise correlation between three hydrophones in triplet sensors, among the triplet sensors and time varying properties. Based on the acquired results, it is possible to verify some information for beamforming and signal processing methods with considering the properties of the triplet line array.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.1
• /
• pp.37-48
• /
• 2000

In this paper, we propose a new connected operator Using morphological grayscale reconstruction for region-based coding First, an effective method of reference-image creation lis proposed, which is based on the Size as well as the contrast. This improves the performance of simplification, because It preserves perceptually important components and removes unnecessary components The conventional connected operators are good for removing small regions, but have a serious drawback for low-contrast regions that are larger than the structuring element. That is, when the conventional connected operators are applied to tills region, the simplification becomes less effective or several meaningful regions are merged to one region to avoid this, the conventional geodesic dilation is modified to propose an adaptive operator to reduce the effect of inappropriate propagation, pixels reconstructed to the original values are excluded m the dilation operation Experimental results have shown that the proposed algorithm achieves better performance In terms of the reconstruction of flat zones. The Picture quality has also been improved by about 7dB, compared to the conventional methods.

• Journal of The Korean Association of Information Education
• /
• v.5 no.2
• /
• pp.279-287
• /
• 2001

In this paper, we have defined and designed the structure of standardized XML content for supplying efficient e-Learning contents. We have also implemented the prototype of XML contents generator to create the educational contents easily. In addition, we have suggested the contents searching method using Case Base Reasoning and Bayesian belief network to supply XML contents suitable to learners request. The existing e-Learning system based on HTML could not customize and standardize, but XML contents can be reused and made an intelligent learning by supplying an adaptive content according to learners level. For evaluating the efficiency of designed XML content, we make the standard XML content for learning JAVA program in e-Learning system as well as discussing about the integrity and expanding the educational content. Finally, we have shown the architecture and effectiveness of the knowledge-based XML contents retrieval manager.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1130-1137
• /
• 2003

This performance is motivated to develop a tracking antenna system for receive the satellite broadcasting signal in the coast sailing ship. Therefore, this system is made to small size, light weight and simple operation which is must to low cost system for popularization of small size ship and adaptive possibilities with useful on a ship in the coast using 1 axis Az-mount. The antenna mount structure is a compact size and easy operation to the Az-axis type which is operated by step motor. The antenna unit is a domestic made plate type of patch array and ship's moving detection is using the gyro sensor for ship's moving control. We are designed to algorithm, which walking is abreast for step track and ship's moving compensation. Ship's moving compensation is adapted to the closed loop control method by detection from gyro sensor. This system is consisted of micro processor, ADC, comparative amplifier, step motor driver, mount mechanism and algorithm. We have analysised the tracking performance of prototype on sailing ship board.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.237-245
• /
• 2012

This paper describes an acoustic echo canceller with double-talk by the blind signal separation. The acoustic echo canceller is deteriorated or diverged in the double-talk period. So we use the blind signal separation to estimate the near-end speech signal and to eliminate the estimated signal from the residual signal. The blind signal separation extracts the near-end signal with dual microphones by the iterative computations using the 2nd order statistical character. Because the mixture model of blind signal separation is multi-channel in the closed reverberation environment, we used the copied coefficients of echo canceller without computing the separation coefficients. By this method, the acoustic echo canceller operates irrespective of double-talking. We verified performances of the proposed acoustic echo canceller by simulations. The results show that the acoustic echo canceller with this algorithm detects the double-talk periods thoroughly, and then operates stably in the normal state without the divergence of coefficients after ending the double-talking. And it shows the ERLE of averagely 20dB higher than the normal LMS algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11C
• /
• pp.1071-1076
• /
• 2006

In this paper, we develop face and hand tracking for sign language recognition system. The system is divided into two stages; the initial and tracking stages. In initial stage, we use the skin feature to localize face and hands of signer. The ellipse model on CbCr space is constructed and used to detect skin color. After the skin regions have been segmented, face and hand blobs are defined by using size and facial feature with the assumption that the movement of face is less than that of hands in this signing scenario. In tracking stage, the motion estimation is applied only hand blobs, in which first and second derivative are used to compute the position of prediction of hands. We observed that there are errors in the value of tracking position between two consecutive frames in which velocity has changed abruptly. To improve the tracking performance, our proposed algorithm compensates the error of tracking position by using adaptive search area to re-compute the hand blobs. The experimental results indicate that our proposed method is able to decrease the prediction error up to 96.87% with negligible increase in computational complexity of up to 4%.