• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.77-83
• /
• 2003

This paper deals with a position control problem of a hydraulic proportional position control system using a nonlinear friction compensation control. As nonlinear friction, stiction and coulomb friction forces are considered and modeled as deadzone and external disturbance respectively. In order to compensate this nonlinearities, we designed the controller which is the adaptive friction compensator using discrete time Model Reference Adaptive Control method in this paper. Digital Signal Processing board is employed for data acquisition and manipulation. The experimental results show that response is slow and steady-state error cannot be compensated properly without friction compensation but this compensator is effective to obtain fast response and good steady-state response.

• 사물인터넷융복합논문지
• /
• 제10권2호
• /
• pp.51-60
• /
• 2024

저조도 환경에서 영상 이미지의 콘트라스트가 낮고 식별이 어려운 문제를 목표로 사람의 시각 감지 기반의 콘트라스트 적응 보상 증진 알고리즘을 제안한다. 첫째, 저조도 환경에서 평균 밝기, 평균 대역폭 요인의 영상 이미지 특징 요인을 추출하고, 원본 영상의 회색/색도 차이에 따라 사람의 시각적 콘트라스트 해상도 보상의 수학적 모델을 설정하며, 실제 컬러의 3원색에 대해 각각 비례 적분하여 보상한다. 다음으로 보상 정도가 명시각 차이를 적절하게 구별할 수 있는 것보다 낮을 때 보상 임계값 선형 보상이 명시각에서 전체 대역폭으로 설정된다. 마지막으로 주관적인 이미지 품질 평가와 이미지 특성 요인을 결합하여 비례 계수를 보상하는 자동 최적화 모델을 구축한다. 실험 테스트 결과는 영상 이미지 적응 증진 알고리즘이 우수한 증진 효과와 우수한 실시간 성능을 가지며 다크 비전 정보를 효과적으로 마이닝할 수 있으며 다양한 시나리오에서 널리 사용될 수 있음을 보여준다.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1551-1556
• /
• 2016

A combined CPG (Central Pattern Generator) based foot trajectory and GP (Genetic Programming) based joint compensation method is presented for the adaptive humanoid walking. The CPG based foot trajectory methods have been successfully applied to basic slops and variable slops with slow rates, but have a limitation for the steep slop terrains. In order to increase an adaptability of humanoid walking for the rough terrains, a GP based joint compensation method is proposed and combined to the CPG (Central Pattern Generator) based foot trajectory method. The experiments using humanoid robot Nao are conducted in an ODE based Webots simulation environmemt to verify a stability of walking for the various aslope terrains. The proposed method is compared to the previous CPG foot trajectory technique and shows better performances especially for the steep varied slopes.

• 대한의용생체공학회:의공학회지
• /
• 제20권3호
• /
• pp.265-274
• /
• 1999

본 논문에서는 3차원 의료 영상에 적합한 interframe 부호화 알고리즘을 제안하였다. 제안된 알고리즘은 움직임 추정/보상과 변환 부호화를 사용하는 동영상 압축 방법에 기초를 두고 있다. 이 알고리즘에서는 움직임 추정을 위해 와핑 방법이 채택되었다. 그리고, 부호화 효율을 향상시키기 위해 적응적 모드 선택을 사용하여 웨이블릿 변환 영역에서 움직임 조상된 오차 영상과 원 영상을 혼합한다. 이렇게 혼합된 영상은 제로트리 부호화 기법에 의해 압축된다. 본 논문은 제안된 방법이 3차원 의료 영상의 부호화에 매우 유용함을 증명하였다. 모의실험결과는 제안된 방법이 슬라이스 간의 간격과 무관하게 항상 좋은 결과를 얻을 수 있도록 하고, 그럼으로써 3차원 의료 영상 압축에 매우 바람직하다는 사실을 보여준다.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.65-71
• /
• 1998

This paper presents in-process compensation methodology to eliminate cutter runout and improve machined surface quality. The cutter runout compensation system consists of the micro-positioning mechanism with the PZT (piezo-electric translator) which is embeded in the sliding table to manipulate the radial depth of cut in real time. For the implementation of cutter runout compensation methodology. cutting force adaptive control was proposed in the angle domain based upon PI (proportional-integral) control strategy to eliminate chip-load change in end milling process. Micro-positioning control due to adaptive acuation force response improves the machined surface quality by compensation or elimination of cutter runout induced cutting force variation. This results will provide lots of information to build-up the precision machining technology.

• Journal of Welding and Joining
• /
• 제33권6호
• /
• pp.13-20
• /
• 2015

Many automotive companies are endeavoring to improve the quality of resistance spot welding by updating body-in-white (BIW) production line with adaptive control spot welding system to compensate the process disturbances such as gap, electrode wear, oxidized surfaces, poor fit up and adhesive etc. Most of the commercial adaptive weld controllers require proper "Initial Welding Schedule" or "Reference weld" to achieve compensation in welding parameters during real time welding. In this study, the compensation of a commercial adaptive weld controller had been observed and analyzed thoroughly for various process disturbances to find optimal initial welding schedule. It was observed that 90 percent of the expulsion current in constant current control as reference welding schedule conferred the maximum button diameter in adaptive control welding. Finally, effects of each disturbance in combined field disturbances system with adaptive control had also been confirmed with the design of experiment (DOE) by minitab(R)16 for combined disturbances situation and suitability of optimum initial weld current had also established with real body part validation test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2183-2185
• /
• 2000

This paper presents an auxiliary beam-assisted adaptive compensation technique applied to alleviate the problem of LDV's body vibration. The LMS algorithm is applied to adaptively compensate the body vibration utilizing the reference signal provided by the auxiliary beam. The usefulness of the proposed technique is verified via computer simulations performed for diverse types of target signals and body vibration.

• 수산해양기술연구
• /
• 제30권4호
• /
• pp.329-340
• /
• 1994

This paper presents a dynamic compensation methodology for robust trajectory tracking control of uncertain robot manipulators. To improve tracking performance of the system, a full model-based feedforward compensation with continuous VS-type robust control is developed in this paper(i.e,. robust decentralized adaptive control scheme). Since possible bounds of uncertainties are unknown, the adaptive bounds of the robust control is used to directly estimate the uncertainty bounds(instead of estimating manipulator parameters as in centralized adaptive control0. The global stability and robustness issues of the proposed control algorithm have been investigated extensively and rigorously via a Lyapunov method. The presented control algorithm guarantees that all system responses are uniformly ultimately bounded. Thus, it is shown that the control system is evaluated to be highly robust with respect to significant uncertainties.

• 한국경영과학회지
• /
• 제31권3호
• /
• pp.27-40
• /
• 2006

Today's customer demands in supply chains tend to change quickly, variously even in a short time Interval. The uncertainties of customer demands make it difficult for supply chains to achieve efficient inventory replenishment, resulting in loosing sales opportunity or keeping excessive chain wide inventories. Un this paper, we propose an adaptive vendor managed inventory (VMI) model for a two-echelon supply chain with non-stationary customer demands using the action-reward learning method. The Purpose of this model is to decrease the inventory cost adaptively. The control Parameter, a compensation factor, is designed to adaptively change as customer demand pattern changes. A simulation-based experiment was performed to compare the performance of the adaptive VMI model.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1995년도 학술대회
• /
• pp.165-170
• /
• 1995

In this paper, it is attempted to apply the adaptive digital signal processing to compensate for a linear distortion of a loudspeaker and implement a real time hardware for that purpose. The real time system is implemented by using the DSP56001, a general purpose signal processor, as a host processor and the DSP56200, a cascadable adaptive FIR filter peripheral chip, as an adaptive digital filter. The system has 1000 taps at a 44.1kHz. After inverse modeling of under_compensation_speaker, the system reduces loudspeaker's linear distortions by pre-processing an input audio signal to loudspeaker. The experiment shows satisfactory results; after adaption with white noise as input signal for 60sec, the flat amplitude and linear phase frequency characteristics is found to lie over a wide frequency range of 100Hz to 20kHz.