• 제목/요약/키워드: adaptive PI control

검색결과 140건 처리시간 0.023초

퍼지 적응 메카니즘을 이용한 유도전동기의 HBPI 제어기 (HBPI Controller of Induction Motor using Fuzzy Adaptive Mechanism)

  • 남수명;이홍균;정동화
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제54권8호
    • /
    • pp.395-401
    • /
    • 2005
  • This paper presents Hybrid PI(HBPI) controller of induction motor drive using fuzzy control. In general, PI controllers used in computer numerically controlled machines process fixed gain. They may perform well under some operating conditions, but not all. To increase the robustness of fixed gain PI controller, HBPI controller proposes a new method based self tuning PI controller. HBPI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of induction motor are presented to show the effectiveness of the proposed gam tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

근사적 모델 역변환을 활용한 전기-유압 액추에이터의 적응 위치 제어기 설계 (Adaptive Position Controller Design of Electro-hydraulic Actuator Using Approximate Model Inversion)

  • 이경하;백승국;구자춘
    • 로봇학회논문지
    • /
    • 제11권2호
    • /
    • pp.92-99
    • /
    • 2016
  • An electro-hydraulic actuator (EHA) is widely used in industrial motion systems and the increasing bandwidth of EHA position control is important issue. The model-inverse feedforward controller is known to extend the bandwidth of system. When the system has non-minimum phase (NMP) zeros, direct model inversion makes system unstable. To overcome this problem, an approximate model-inverse method is used. A representative approximate model inversion method is zero phase error tracking control (ZPETC). However, if zeros locate right half plane of z-plane, the approximate inverse model amplifies the high-frequency response. In this paper, to solve the problem of ZPETC, an adaptive model-inverse control is proposed. The adaptive algorithm updates feedforward term in real-time. The effectiveness of the proposed adaptive model-inverse position control strategy is verified by comparison with typical proportional-integral (PI) control and feedforward control by experiments. As a result, the proposed adaptive controller extends the bandwidth of EHA position control.

적응 백스테핑과 MRAS를 이용한 유도전동기 제어 (Induction Motor Control Using Adaptive Backstepping and MRAS)

  • 이선영;박기광;양해원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.77-78
    • /
    • 2008
  • This paper presents to control speed of induction motors with uncertainties. We use an adaptive backstepping controller with fuzzy neural networks(FNNs) and model reference adaptive system(MRAS) at Indirect vector control method. The adaptive backstepping controller using FNNs can control speed of induction motors even we have a minimum of information. And this controller can be used to approximate most of uncertainties which are derived from unknown motor parameters, load torque such as disturbances. MRAS estimates to rotor resistance and also can find optimal flux to minimize power losses of Induction motor. Indirect vector PI current controller is used to keep rotor flux constant without measuring or estimating the rotor flux. Simulation and experiment results are verified the effectiveness of this proposed approach.

  • PDF

영구자석 동기모터를 위한 CTRNN모델 기반 적응형 PI 제어기 설계 (Adaptive PI Controller Design Based on CTRNN for Permanent Magnet Synchronous Motors)

  • 김일환
    • 전기학회논문지
    • /
    • 제65권4호
    • /
    • pp.635-641
    • /
    • 2016
  • In many industrial applications that use the electric motors robust controllers are needed. The method using a neural network in order to design a robust controller when a disturbance occurs is studied. Backpropagation algorithm, which is used in a conventional neural network controller is used in many areas, but when the number of neurons in the input layer, hidden layer and output layer of the neural network increases the processing speed of the learning process is slow. In this paper an adaptive PI(Proportional and Integral) controller based on CTRNN(Continuous Time Recurrent Neural Network) for permanent magnet synchronous motors is presented. By varying the load and the speed the validity of the proposed method is verified through simulation and experiments.

1기 무한모선 전력계통의 적응 전압 제어와 거버너를 이용한 주파수 진동의 억제 (Adaptive Voltage Control of a Single Machine Infinite Bus(SMIB) Power System with Governor Control for Reduced Oscillation of the Frequency)

  • 김석균;윤태웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.51-52
    • /
    • 2008
  • In this paper, we propose two control schemes. The first control scheme is an adaptive passivity-based excitation control which regulates the terminal voltage to its reference. This controller is obtained through two steps: firstly, a simple direct adaptive passivation controller is designed for the power system with parametric uncertainties; then a linear PI controller is applied to converge the terminal voltage to its reference. The second control scheme is a linear governor control which consists of the frequency and the mechanical power. It is shown that the internal dynamics are locally stable with controllable damping. In the end, the boundness of all electrical variables, the frequency, the mechanical power, and the convergence of the terminal voltage to its reference can be achieved by these control schemes.

  • PDF

벤치마크 로봇의 동적 마찰 보상을 위한 적응 제어기 설계 (Design of Adaptive Controller to Compensate Dynamic Friction for a Benchmark Robot)

  • 김인혁;조경훈;손영익;김필준
    • 전자공학회논문지
    • /
    • 제51권1호
    • /
    • pp.202-208
    • /
    • 2014
  • 로봇 시스템에 작용하는 마찰력은 비선형 형태이며 특히 저속에서의 정밀 제어를 어렵게 만든다. 본 논문에서는 로봇 연구에서 자주 활용되고 있는 벤치마크 로봇 시스템의 단축 모델에 대한 동적 마찰 보상 문제를 다룬다. 마찰 모델은 동적 특성 및 다양한 효과를 나타낼 수 있도록 비선형 동적 모델인 LuGre 모델을 고려한다. 본 논문에서 제안하는 제어기는 두 부분으로 구성된다. 동적 마찰의 추정 및 보상을 위해 Dual 관측기 기반의 적응 제어기를 사용한다. 마찰 추정 오차 및 나머지 외란을 보상하기 위해 PI 관측기를 추가로 설계한다. 모의실험을 통해 비선형 동적 마찰이 벤치마크 로봇 시스템의 제어 성능에 미치는 영향을 확인하고 제안된 제어기를 사용함으로써 동적 마찰에 대한 제어 성능이 향상됨을 보인다.

Adaptive Digital Predictive Peak Current Control Algorithm for Buck Converters

  • Zhang, Yu;Zhang, Yiming;Wang, Xuhong;Zhu, Wenhao
    • Journal of Power Electronics
    • /
    • 제19권3호
    • /
    • pp.613-624
    • /
    • 2019
  • Digital current control techniques are an attractive option for DC-DC converters. In this paper, a digital predictive peak current control algorithm is presented for buck converters that allows the inductor current to track the reference current in two switching cycles. This control algorithm predicts the inductor current in a future period by sampling the input voltage, output voltage and inductor current of the current period, which overcomes the problem of hardware periodic delay. Under the premise of ensuring the stability of the system, the response speed is greatly improved. A real-time parameter identification method is also proposed to obtain the precision coefficient of the control algorithm when the inductance is changed. The combination of the two algorithms achieves adaptive tracking of the peak inductor current. The performance of the proposed algorithms is verified using simulations and experimental results. In addition, its performance is compared with that of a conventional proportional-integral (PI) algorithm.

HAI 제어기반 SV PWM 방식을 이용하나 IPMSM의 고성능 제어 (High Performance Control of IPMSM using SV-PWM Method Based on HAI Controller)

  • 최정식;고재섭;정동화
    • 조명전기설비학회논문지
    • /
    • 제23권8호
    • /
    • pp.33-40
    • /
    • 2009
  • 본 논문에서는 HAI(Hybrid Artificial Intelligent) 제어기반의 SV PWM 방식을 이용한 IPMSM의 고성능 제어를 제시한다. HAI 제어기는 적응 퍼지제어 및 신경회로망의 장점을 혼합 적용한다. SV PWM 방식은 지금까지 산업용 전동기 제어분야에 적용되고 있고 출력전류의 고조파 비율, 스위칭 주파수 및 응답특성을 향상시키는 수 있는 기법이다. HAI 제어기는 지령전압을 계산할 때 발생되는 문제점을 해결하기 위하여 종래의 PI 제어기를 대체하여 사용한다. HAI 제어기는 지령모델 기반의 적응제어, 퍼지제어 및 신경회로망으로 구성되어 속도 성능을 개선한다. 본 논문에서는 제시한 HAI 제어기를 적용하여 파라미터 변동, 정상상태 및 과도상태 등의 응답특성을 분석하고 종래의 FNN 제어기 및 PI 제어기의 응답특성과 비교한다. 따라서 본 논문에서는 HAI 제어기의 타당성을 입증한다.

Missile two-loop acceleration autopilot design based on 𝓛1 adaptive output feedback control

  • He, Shao-Ming;Lin, De-Fu
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제15권1호
    • /
    • pp.74-81
    • /
    • 2014
  • This article documents the design of a novel two-loop acceleration autopilot based on $\mathcal{L}_1$ adaptive output feedback control for tail-controlled missiles. The inner loop is an adaptive angle-of-attack tracking loop and the outer loop is the traditional PI controller for error compensation. A systematic low-pass filter design procedure is provided for minimum phase system and is applied to the inner loop design while the parameters of the outer loop are obtained from the multi-objective optimization problem. The effectiveness of the proposed autopilot is verified through numerical simulations under various conditions.

Wavelet Neural Network Controller for AQM in a TCP Network: Adaptive Learning Rates Approach

  • Kim, Jae-Man;Park, Jin-Bae;Choi, Yoon-Ho
    • International Journal of Control, Automation, and Systems
    • /
    • 제6권4호
    • /
    • pp.526-533
    • /
    • 2008
  • We propose a wavelet neural network (WNN) control method for active queue management (AQM) in an end-to-end TCP network, which is trained by adaptive learning rates (ALRs). In the TCP network, AQM is important to regulate the queue length by passing or dropping the packets at the intermediate routers. RED, PI, and PID algorithms have been used for AQM. But these algorithms show weaknesses in the detection and control of congestion under dynamically changing network situations. In our method, the WNN controller using ALRs is designed to overcome these problems. It adaptively controls the dropping probability of the packets and is trained by gradient-descent algorithm. We apply Lyapunov theorem to verify the stability of the WNN controller using ALRs. Simulations are carried out to demonstrate the effectiveness of the proposed method.