• Nuclear Engineering and Technology
• /
• v.39 no.1
• /
• pp.31-42
• /
• 2007

Energy supply is increasingly showing up as a major issue for electricity supply, transportation, settlement, and process heat industrial supply including hydrogen production. Nuclear power is part of the solution. For electricity supply, as exemplified in Finland and France, the EPR brings an immediate answer; HTR could bring another solution in some specific cases. For other supply, mostly heat, the HTR brings a solution inaccessible to conventional nuclear power plants for very high or even high temperature. As fossil fuels costs increase and efforts to avoid generation of Greenhouse gases are implemented, a market for nuclear generated process heat will be developed. Following active developments in the 80's, HTR have been put on the back burner up to 5 years ago. Light water reactors are widely dominating the nuclear production field today. However, interest in the HTR technology was renewed in the past few years. Several commercial projects are actively promoted, most of them aiming at electricity production. ANTARES is today AREVA's response to the cogeneration market. It distinguishes itself from other concepts with its indirect cycle design powering a combined cycle power plant. Several reasons support this design choice, one of the most important of which is the design flexibility to adapt readily to combined heat and power applications. From the start, AREVA made the choice of such flexibility with the belief that the HTR market is not so much in competition with LWR in the sole electricity market but in the specific added value market of cogeneration and process heat. In view of the volatility of the costs of fossil fuels, AREVA's choice brings to the large industrial heat applications the fuel cost predictability of nuclear fuel with the efficiency of a high temperature heat source tree of Greenhouse gases emissions. The ANTARES module produces 600 MWth which can be split into the required process heat, the remaining power drives an adapted prorated electric plant. Depending on the process heat temperature and power needs, up to 80% of the nuclear heat is converted into useful power. An important feature of the design is the standardization of the heat source, as independent as possible of the process heat application. This should expedite licensing. The essential conditions for success include: ${\bullet}$ Timely adapted licensing process and regulations, codes and standards for such application and design ${\bullet}$ An industry oriented R&D program to meet the technological challenges making the best use of the international collaboration. Gen IV could be the vector ${\bullet}$ Identification of an end user(or a consortium of) willing to fund a FOAK

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.712-720
• /
• 2011

Radio frequency identification (RFID) is an established technology and has the potential, in a variety of applications, to significantly reduce cost and improve performance. As RFID-enabled applications will fulfill similar tasks across a range of processes adapted to use the data gained from RFID tags, they can be considered as software products derived from a common infrastructure and assets that capture specific ions in the domain. This paper discusses a framework that supports the development of RFID-enabled applications based on a business process family model (BPFM), explicitly representing both commonalities and variabilities. To develop this framework, common activities are identified from RFID-enabled applications and the variabilities in the common activities are analyzed in detail using variation point concepts. Through this framework, RFID data is preprocessed, and thus, RFID-enabled applications can be developed without having to process RFID data. Sharing a common model and reusing assets to deploy recurrent services may be considered an advantage in terms of economic significance and the overall product quality afforded.

• Journal of Information Technology Applications and Management
• /
• v.12 no.4
• /
• pp.157-171
• /
• 2005

Recently companies are aggressively Pushing ahead with integrating the systematical applications of internal and external information systems such as Data level, Application level, Process level in the company, Process level between companies. The EAI solution is generally considered as the necessary tool to integrate companies, but the appraisal standard for the EAI solution has not Vet settled in Korea, so the companies have difficulty in deciding whether to adopt the EAI solution or not. Through this report, we first introduce the KRA Project as the best practice in making an application of the settled standard to evaluate and adopt the EAI solution, and then suggest that it can be adapted to companies considering applying to the EAI solution.

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.4 s.6
• /
• pp.37-44
• /
• 2002

The cable staying roof structure of Jeju worldcup stadium should be erected with correct prestressed force that is required by the structural engineer who designs this structure. This study evaluated and adapted the erection process of cable, the erection force and the measurement of cable force for Jeju worldcup stadium. The process of erection is required not only to calculate erection force but also to check structural stability, following process, construction period and using cranes. Considering the site conditions and technical problems, this study can attain successfully the erection of cable staying roof structure of Jeju worldcup stadium with allowable errors.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.84-91
• /
• 2004

A CCD camera with a laser stripe was applied to realize the automatic weld seam tracking in GMAW. It takes relatively long time to process image on-line control using the basic Hough transformation, but it has a tendency of robustness over the noises such as spatter and arc tight. For this reason, it was complemented with adaptive Hough transformation to have an on-line processing ability for scanning specific weld points. The adaptive Hough transformation was used to extract laser stripes and to obtain specific weld points. The 3-dimensional information obtained from the vision system made it possible to generate the weld torch path and to obtain the information such as width and depth of weld line. In this study, a neural network based on the generalized delta rule algorithm was adapted for the process control of GMA, such as welding speed, arc voltage and wire feeding speed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.124-128
• /
• 2001

Two-dimensional solidification analysis during rheology forming process of semi-solid aluminum ahoy has been studied Two-phase fluid flow model to investigate the velocity field and temperature distribution is proposed. The unposed mathematical model is applied to the die shape of the two type. To calculate the velocities and temperature fields during rheology forming process, the each governing equation correspondent to the liquid and solid region are adapted. Theoretical model on the basis of the two-phase flow model is the mixture rule of solid and liquid phases. This approach is based on the liquid and solid viscosity.

• Journal of Korean Institute of Industrial Engineers
• /
• v.11 no.2
• /
• pp.131-140
• /
• 1985

This paper analyses the hindrance factors of process capability. The reasons of the products which are out of specification can be accounted on the hindrance factors. An $\hat{e}$nquete which consists of 4 categories such as technical knowledge, work performance, work environment, and human relations at home and office, is prepared and handed out to 1000 works to get information. And Spearman's Correlation Coefficient (${\rho}s$) is adapted as an anaysis and consideration criterion. In consequence, it is revealed the next 4 factors become the vital hindrance factors of process capability: (1) unskillful working (2) over load for operators (3) imperfect work environment (4) incoordination of human relations And the correspondent policy can be summarized as follows: (1) propagation & fixation of I.E. techniques (2) harmonization of human relations (3) improvement of work environment (4) strengthening the T.W.I.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.125-130
• /
• 1994

Recently,manufacturing work been transformed to small acale production from with various items to act up to user's expectation from mass production with a little items required in the past. The FMS using NC type mother machinaries has been applied actively also in domestic manufacturing line to meet thus tendancy, but there are many machining troubles occured in work process not be settled yet. Nowdays high efficiency has been required no less than high precision in grinding work for the improvement of productivity. In this study, to represent more advanced FMS can be adapted to thus situation In-process type monitoring method using AE and Current sensors is suggested to investigatethe machining condition in grinding process. As results from this experimental study, is is recoqnized well that grinding conditions and dressing point of in time can be estimated effectively using monitoring method suggested. Furthermore, surface shape of grinding wheel on voluntary point of in time can be predicted indirectly through the observation and comparison of AE signal waveform obtained as performance of continuous dressing work.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.192-200
• /
• 1998

Even though most die-maker are using CAD/CAM systems rout NC tool-path generation, “front-end”CAD/CAM technologies have not been fully adapted to sculptured surface machining(SSM) nor are sufficiently utilized in die shops. This gap between die-making industry and CAD/CAM community persists mainly because of the lack of a SSM-process model through which the two groups communicate with each other. Proposed in this paper is a model of SSM-processes which is built around the concepts of machining stages, unit machining operations, and each machining stage is decomposed into a sequence of unit machining operations(UMOs). Identified in the paper are five machining stages and 17 types of UMO. Based on the framework of the proposed model, an example of inner-panel stamping-die machining processes is described in detail.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3044-3046
• /
• 2000

A Stereo matching has been an important tool for reconstructing three dimensional terrain. In this stereo matching process, DEM(Digitai Elevation Map) can be generated by the disparity from reference image to target image. Generally disparity map in matching process can be implemented by wraping from reference image to target image and if the role of reference and target is interchanged, the different DEM can be obtained. To evaluate the generated DEM from matching process, We adapted the Photorealistic synthetic image generator using ray tracing technique. The generator produce two simulated image from previous DEM and Ortho-image which is regard as Ground-truth. In this paper, we are concern about estimating more accurate DEM from these two DEMs. The several fusion methods of two DEMs are proposed to generate accurate DEM and compared with previous method. one of fusion methods is by using Cross-Correlation match score and the true DEM should have a high matching score.