• Structural Engineering and Mechanics
• /
• v.32 no.1
• /
• pp.21-36
• /
• 2009

An importance sampling method is presented for computing the first passage probability of elasto-plastic structures under stochastic excitations. The importance sampling distribution corresponds to shifting the mean of the excitation to an 'adapted' stochastic process whose future is determined based on information only up to the present. A stochastic control approach is adopted for designing the adapted process. The optimal control law is determined by a control potential, which satisfies the Bellman's equation, a nonlinear partial differential equation on the response state-space. Numerical results for a single-degree-of freedom elasto-plastic structure shows that the proposed method leads to significant improvement in variance reduction over importance sampling using design points reported recently.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.370-374
• /
• 1993

This paper describes a study on the expert system based process planning of the block division process in shipbuilding. The prototype system developed deterines the block division line of the midship of crude-oil tanker. Case-based reasoning (CBR) approach relying on previous similar cases to solve the problem is applied instead of rule-based reasoning (RBR). Similar cases are retrieved from case base according to the similarity metrics between input problem and cases. The retrieved case with the highest priority is then adapted to fit to the input problem buy adaptation rules. The adapted solution is proposed as the division line for the input problem.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.159-162
• /
• 2003

The remeshing algorithm using the constrained Delaunay method adapted to the mesh density map is developed. In the finite element simulation of forging process, the numerical error increases as the process goes on. However, it is not desirable to use a uniformly fine mesh in the whole domain. Therefore, it is necessary to reduce the analysis error by constructing locally fine mesh at the region where the error is concentrated such as die corner. In this paper, the point insertion algorithm is used and mesh size is controlled by using a mesh density map constructed with a posteriori error estimation. And an optimized smoothing technique is adapted to have smooth distribution and improve the quality of the mesh.

• Journal of Plant Biology
• /
• v.38 no.1
• /
• pp.1-10
• /
• 1995

Photoinhibition and its recovery of spectrally adapted Anacystis nidulans were studied. Phycocyanin and Chl content and phycocyanin/Chl ratio were increased in cells grown under blue-green light compared with those grown in white light. Photosynthetic activities of white light and blue-green light grown cells were reduced by 50% after 15 min and 10 min of photoinhibitory light treatment (1.2 mmol·m-2s-1), respectively, largely due to the decline of PSII activities. However, their activities were recovered fully after 30 min incubation under weak light. Treatment of rifampicin and chloramphenicol magnified the photoinhibitory effects and suppressed the recovery with disappearance of susceptibility to photoinhibition and delayed the recovery process, indicating no significant differences in phosphorylation, dephosphorylation and protease activity between two cells. Therefore, it is suggested that the increased sensitivity of blue-green adapted cells might be attributed to the decline of protein synthesis, and phosphorylation-dephosphorylation of protein and protease activity might be involved in the recovery process.

• Journal of Welding and Joining
• /
• v.33 no.6
• /
• pp.36-41
• /
• 2015

In the automotive industry, TWB hot stamping process is broadly adapted to reduce weight of the car and improve fuel efficiency. However, the process faces a problem of weakened strength of the welded zone after hot stamping process, due to the fact that Al-Si elements of the coating layer penetrating the welded zone. In this study, filler wires with high percentages of carbon and manganese is adapted during laser welding process to secure the strength of the fusion zone. In addition, wire feeding speed and laser welding speed are optimized by sample test.

• The Korean Journal of Rehabilitation Nursing
• /
• v.19 no.2
• /
• pp.118-127
• /
• 2016

Purpose: This study was to develop an evidence-based clinical practice protocol of physical restraints by adaptation process for patients with a geriatric hospital. Methods: Protocol adaptation process was conducted in accordance with manual for guideline adaptation version 1.0 by ADAPTE collaboration. Results: The adapted physical restraint protocol was consisted of 3 domains and 37 recommendations. The number of recommendations in each domain were: 7 nursing assessment, 19 nursing intervention, and 11 nursing evaluation. More than half (56.8%) of the recommendations were rated as grade B, 37.8% as grade C, and 5.4% were rated as grade D. Conclusion: The adapted physical restraint protocol is expected to contribute as an evidence-based clinical practice protocol for healthcare workers in geriatric hospitals for reducing and improving efficiency of appropriate physical restraints use.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.173-175
• /
• 2011

A study is for improvement in practical use of RFID+4D. In the yard of construction industry, using information has become more important part to control total process. One of the way to improve the information using that comes from each step, RFID is getting attention. But it's not really adapted on construction industry. Especially, a study on the curtain wall part has a problem of engineering process. Each steps of curtain wall process are separated. If it' could be connect totally, controling information of curtain wall from producing to fitting become more efficient with adapted RFID+4D.

• Journal of Korean Society for Quality Management
• /
• v.47 no.1
• /
• pp.199-211
• /
• 2019

Purpose: The concept of quality is changing in the quality 4.0 era with the fourth industrial revolution in the world. This research aims to understand the characteristics of well-adapted companies against the quality 4.0 era and to improve the quality of clothing companies. Methods: We analyzed companies that responded well to the quality 4.0 era, especially Kutesmart using Quality 4.0 Matrix. We focused on the service process of Kutesmart and we suggested modified service process to improve quality. We also interviewed an expert to verify this process is valid. Results: We found that two types are classified of well-adapted companies against the quality 4.0 era. Especially, Kutesmart has built a smart factory and introduced new technologies like 3D scanner and big data analysis. However, Kutesmart has a weakness in post-purchase process like other clothing companies. Kutesmart could solve this problem with modular production method for damaged part of customer. Conclusion: This research can be used for better understanding of the characteristics of well-adapted companies against the quality 4.0 era and service process of Kutesmart that is custom clothing company for providing information for benchmarking in this industry. This study suggests that further empirical researches on the costs and the efficiencies of applying the new technologies are necessary.

• Microbiology and Biotechnology Letters
• /
• v.23 no.1
• /
• pp.87-90
• /
• 1995

A process of organically bound germanium preparation was developed for healthy food using inorganic germanium adapted Saccharomyces cerevisiae. Adaptations of Saccharomyces cerevisiae against inorganic germanium were successively carried out through stepwise increase of GeO$_{2}$ concentration in order to produce high quantities of germanium bound yeast. Productivity of yeast and quantities of germanium in yeast were obtained 70.2 g/l and 9780 ppm, repectively, when adapted yeast and fed batch culture were used. Germanium taken-up yeast is to be organically bound germanium by evidence of no difference of germanium content after dialysis.

• Human Ecology Research
• /
• v.54 no.1
• /
• pp.13-26
• /
• 2016

The purpose of this paper is to investigate the rationale behind the transformation process of unique shophouse spatial organization in Phnom Penh. We selected 20 representative shophouses located in the Chinese district of Phnom Penh according to construction period. A qualitative study methodology was applied and field surveys were conducted that included interviews with residents, photographs, sketches, measurements, collecting historic photos, and cataloging maps. Selected cases were analyzed in terms of: basic house data, urban block analysis, and unit analysis. Cases were then classified into two types: private courtyard shophouse (PCS) and shared courtyard shophouse (SCS). PCS refers to shophouse typology that maintains most of the characteristics of early shophouses while being transformed into a modern multi-story apartment within a limited one bay plot. However, SCS refers to shophouses adapted from the indigenous forms of PCS that evolved into a multi-storey and multi-family housing typology that includes features that might have been adapted from Western apartment buildings such as sharing a big courtyard, staircase and corridors. We conclude that shophouses in Phnom Penh have positively adopted a Western building typology, adapted it to local traditions, and finally formulated a new building type that represent indicators of a modernization process gradually accepted by society.