• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.3849-3855
• /
• 2012

본 논문은 스텝핑 모터를 이용하여 수동변속기 차량의 클러치를 자동으로 제어하기 위한 제어알고리즘 및 제어로직 구현 결과를 기술한 것이다. 기본제어 알고리즘은 차량의 통신데이터를 이용하여 운전자 의지를 파악하고 이에 따라 클러치 연결 혹은 해제 시점을 파악하여, 이에 따른 구동신호를 발생시키고 클러치의 위치 및 이동거리는 구동신호의 펄스 개수에 의하여 계산된다. 제어로직을 마이크로프로세서에 탑재하는 과정은 자동코드생성기법을 이용하였으며 이를 프로토 타입 제어기에 탑재하여 기본 성능시험을 실시하였다.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.738-750
• /
• 1994

The load-sensing hydraulic system which was developed to improve energy efficiency of conventional hydraulic systems has its own properties. The instability of system responses, linearity of a servo valve, robustness for variation of external load, and dynamic interference between hydraulic motors are such properties which have much to do with control properties of the system. The load-sensing hydraulic system has instability tendancy because the load-sensing mechanism makes a positive feedback loop between the motor part and the pump part. A flow property of the servo valve can be said to be linear because the flow through the valve has nothing to do with a load pressure and the flow is strictly proportional to a valve opening which is adjusted by a valve command signal. The resultant control property can be said to be robust because the steady-state control performance is independent to the load actuated on the motor shaft. In the case when one pump simultaneously drives more than two hydraulic motors, the pump outlet pressure is determined by a hydraulic motor of the largest load pressure among all of the hydraulic motors, and, thus, the other motors are dominated by the largest load pressure. That is, the other motors can be said to be interfered by the motor of the largest load pressure.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.99-104
• /
• 2001

The neural network method has been introduced to design a controller for linear motor feed system and system operation status was monitored. It is most difficult to achieve controller gain tuning because of the information limit. Regardless of the system structure, conventional control gain could be adjusted minimizing the resulting error for both position and velocity using the proposed method. Slight performance deterioration was observed at the small value of training epoch. Different controller performance for position was observed with respect changed sampling time. Actuated system performance was monitored using neural network signal processing and operational status was predicted with the rate of 80% approximately.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.58-65
• /
• 1999

The spinning machine has been developed for a bus and truck wheel disc which is manufactured by spinning process method. This machine has the mechanical structure with bed, 2-column, cross head, 2-vertical slide, 2-horizontal slide with forming roller, clamp slide and main spindle similar to large size vertical lathe. Main spindle attached the mandrel is rotated about 500rpm drived by 280kW power DC motor, and a rotating black material pressed on the mandrel with the clamp slide is spinformed by 2-forming rollers which are attached inner end of the 2-horizontal slides. The 2-vertical and 2-horizontal slides are actuated by the hydraulic cylinder which is controlled by the servo valve individially, and these servo valves are controlled by control signal of the CNC controller which is computed with position signal feedbacked from the encoder sensor. The developed machine can manufacture wheel disc of various section profile without mandrel change because section profile is easily modified using program editing in the CNC controller processor. The wheel disc manufactured by spinning process method has many advantages that the endurance is increased by 2 times and the weight is decreased by 30% compared with a conventional disc.

• International Journal of Safety
• /
• 제11권2호
• /
• pp.10-14
• /
• 2012

Recently, the combined power plants are refocused rapidly as a replaceable energy system of the nuclear power plant. The large turbine is revolved highly at 1800~3600 rpm. Thus, the turbine speed should be monitored with mechanical and electrical method for a safety. The electrical cutoff valve which blocks the flow channel with the electrical signal is with a built in. The aim of this study is to develop a manufacturing technology through by the localization of a solenoid actuated directional control valve. Especially the results show performances of the solenoid valve by the experiments and modeling and the reliability estimation. Applied load port pressure was changed rapidly on the form of a quadratic curve over time. And in the cases of square waveform when 0~100 V and 20~120 V input voltage, it was driven on a stable state until 13.4 Hz and 16.6 Hz, respectively. We think that this study will give useful data for the electricity safety system of the combined power plant gas turbine.

• 대한교통학회지
• /
• 제20권6호
• /
• pp.31-43
• /
• 2002

서울시에 설치되어 운영되고 있는 COSMOS 시스템을 보다 안정화시키기 위한 신호운영 방안을 제시하였다. 우선적으로 COSMOS 운영지역내 주요 교통축의 운영현황을 분석하고, 교통축 소통 원활화를 위한 운영방법으로서, 교통축내 SubArea간 연결성 확보방안, 두 개의 축이 교차하는 경우의 각 축별 연동성 확보방안, 옵셋전이시 발생하는 전이량 감소방안 등을 제시하였다. 그리고, 좌회전 감응제어의 수행상 발생하는 문제점을 파악하여 이에 대한 개선방안을 제시하였다. 마지막으로 대기길이 추정 파라메터에 대한 설정방안을 제시하고. 이에 대하여 현장조사를 통한 평가를 수행하였다. 제시된 방안에 대하여 시뮬레이션 및 현장조사 방법으로 사례검증을 실시한 결과 현재 적용하는 방법과 비교하여 매우 개선된 결과를 얻을 수 있었다. 본 연구결과를 더욱 발전시켜 적용하면, 향후 주요 교통축의 소통 원활화와 COSMOS 시스템의 안정화에 크게 기여할 수 있으리라 판단된다.

• 한국ITS학회 논문지
• /
• 제15권6호
• /
• pp.90-101
• /
• 2016

본 연구에서는 V2X 통신환경 하에서 개별 차량 기반 수집 데이터를 활용하여 독립교차로의 실시간 교통상황대응 최적 교통신호 제어 알고리즘을 개발하였다. 매초 간격으로 V2X 통신환경에서 수집되는 정보를 이용하여 주기, 현시, 현시 순서를 결정하는 알고리즘과 이 알고리즘 안에서 감응식 신호를 적용하여 독립신호 교차로의 신호 최적제어를 실시하였다. 최적화된 신호시간과 본 연구에서 개발된 알고리즘을 활용한 신호제어 성능을 비교하면 전제적으로 평균 지체, 평균 정지지체, 정지횟수, 평균속도가 개선되었음을 나타나고 있으며, 개선 폭이 교통량이 많아질수록 커지는 것으로 분석되었다. 또한 시장점유율에 따른 도입 시기 평가 결과, 평균 지체의 경우 교통량이 500대의 경우 시장점유율이 50% 이하로 내려가면 본 연구에서 개발된 알고리즘이 기존 신호알고리즘보다 높은 지체를 보였으나, 교통량이 1,000대일 경우 시장 점유율 25% 이하에서 지체가 높아졌다. 하지만 1,500대일 경우 시장점유율에 25%에 불과해도 기존의 신호제어 알고리즘보다 지체가 낮아지는 것으로 분석되었다.

• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1045-1053
• /
• 2009

Precision stages for 6-DOF positioning, actuated by PZT stacks, which are fed back by gap sensors and guided by flexure hinges, have enlarged their application territory in micro/nano manufacturing and measurement area. The precision stages inherently have such limitations as the nonlinearity between input and output in piezoelectric stacks, feedback signal noise in precision capacitive gap sensors and low material damping in precision kinematic linkages of mechanical flexures. To surmount these limitations, the precision stage is modeled with physics-based variables, which are identified by transient response correspondence, and a gain margin calculation algorithm using the Prandtl-Ishlinskii model and describing function is newly developed to assess system performance more precisely than linear controller design schemes. Based on such analyses, a precision positioning controller is designed. Excellent positioning accuracy with rapid settlement accomplished by the controller is shown in step responses of the closed-loop system.

• 대한토목학회논문집
• /
• 제32권1D호
• /
• pp.1-11
• /
• 2012

대통령자문 국가경쟁력강화위원회와 경찰은 교통운영체계선진화방안을 통하여 신호교차로에서의 효율적인 운영을 도모하고 있다. 신호교차로의 효율적인 운영으로 정체상황이 개선되는 경우 배기가스 및 탄소배출 감소가 기대되나 지금까지 온실가스 저감효과에 대한 관심이 도로교통 운영부문에서 소외되어 교통운영체계선진화로 인한 탄소배출량 감소 효과가 공학적으로 검토된 바 없다. 본 연구는 교통운영체계선진화방안으로 추진되는 전체 19개 사업수행 항목 중 경찰이 주관하여 추진하는 운영항목으로부터 기대되는 탄소배출량 분석방법 및 연(年) 단위 전국 탄소배출량 저감효과를 제시한다. 분석결과 2010년을 기준으로 우리나라 전체 도로교통 부문에서 탄소배출량을 기준으로 보행자작동신호운영 도입으로 12.31% 감축, 점멸신호운영 도입으로 3.27% 감축, 신호연동 도입으로 2.44% 감축, 직진우선 도입으로 0.97% 감축, 비보호좌회전 도입으로 0.81% 감축, 좌회전감응 도입으로 0.72% 감축 효과가 있는 것으로 분석되었다.

• Journal of Biosystems Engineering
• /
• 제32권5호
• /
• pp.339-347
• /
• 2007

A hexapod walking robot had been developed for gathering information in the field. The developed robot was $260{\times}260{\times}130$ ($W{\times}L{\times}H$, mm) in size and 14.7 N in weight. The legs had nineteen degrees of freedom. A leg has three rotational joints actuated by small servomotors. Two servomotors placed at ankle and knee played the roles of vertical joint for up and down motions of the leg and the other one placed at coxa played the role of horizontal joint for forward and backward motions. In addition, a servomotor placed at thorax between the front legs and the middle legs played the role of vertical joint for pumping the two front legs to climb stair or inclination. Walking motion of the robot was executed by tripod gait. The robot was controlled by manual remote-controller communicated by an infrared ray. Two controllers were equipped to control the walking of the robot. The sub-controller using PIC microcomputer (Microchips, PIC16F84A) received the 16 bit command signal from the manual remote controller, decoded it to 8bit and transmitted it to the main microcomputer (RENESAS, SH2/7045), which controlled the 19 servomotors using the PWM command signals. Walking speeds were controlled by adjusting the period of command cycle and the stride. Forward walking speed were within 100 cm/min to 300 cm/min. However, experimental walking speed had the error of 4-40 cm/min to compare with the theoretical one, because of slippage of the leg and the circular arc motion of servomotor of coxa.