• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.1921-1929
• /
• 2015

The smart substation is the heart of a transmission system, which is particularly emphasized as the most significant composition of smart grids in China. In order to assess the functionality performance of substation technologies, this paper presents methods used to identify the most promising solutions for smart substation design and to evaluate the technical levels of available technologies. The multi-index optimization model is presented to address the issue of smart substation planning. A mathematical model of the planning decision problem is established with multiple objectives consisting of economic, reliability, and green key indices, and many kinds of concerns including physical and environmentally friendly operations are formulated as a set of constraints. With respect to the assessment of the technical level regarding integration of advanced technologies into a substation, a modified grey whitenization weight function is adopted to structure a novel grey clustering method. The proposed grey clustering approach is used to overcome the difficulty of insufficient quantitative assessment capacity for traditional methods. The evaluation of technical effects provides the classification definition for the development phase and the maturity level of the smart substation. The effectiveness of the proposed approaches in planning decision-making and evaluation of construction efforts is demonstrated with case studies involving the actual smart substation projects of Wenchongkou substation in China Southern Power Grid (CSG) and Mengzi substation in State Grid Corporation of China (SGCC).

• 한국안전학회지
• /
• 제32권4호
• /
• pp.59-65
• /
• 2017

This study examined the stakeholder cognition of the safety certification marking system by surveying manufacturers, lessors, and users. In addition, among various issues about safety certification marking systems, the improvement of safety certification marking contents was suggested in order to guarantee quality of temporary equipments. The results by statistical method show that it is necessary to increase of users' understanding about the safety certification marking system. In addition, the quality management system of temporary equipments should be introduced to control the actual condition that temporary equipments of various product companies are mixed in a site during removal and reuse processes. For detailed marking contents, it is recommended that a certification mark, an identification number, and the production year should be displayed and the manufacturer name could be selectively presented. Detail informations such as a safety certification number, a product company, a model type or name, a specification, a weight, a product number, and the location of a certification mark should be identified by the identification number.

• 정보과학회 논문지
• /
• 제44권6호
• /
• pp.628-636
• /
• 2017

HTTP 적응적 스트리밍(HTTP adaptive streaming)은 서버가 다양한 품질의 비디오를 저장해놓고 클라이언트가 세그먼트 처리량을 기반으로 가용대역폭을 예측하여 알맞은 품질을 요청함으로 체감품질을 향상시키는 기법이다. 그러나 대역폭 변화가 빈번하고 높은 손실률을 갖는 무선 환경에서는 실제 네트워크의 대역폭을 측정하는데 어려움이 있다. 대역폭 측정 오류로 인한 빈번한 품질 변화와 재생 끊김 현상은 체감 품질을 저하시킨다. 본 논문에서는 지연의 편차인 지터를 패킷 단위로 측정하고 지터에 따라 가중치를 부여하여 가용대역폭을 측정하는 기법을 제안한다. 제안하는 기법은 급격한 대역폭 변화로 인해 높은 지터가 발생하는 경우 대역폭 변화를 적게 반영하여 비디오 품질 변화를 줄이고 버퍼 언더플로우를 완화시킨다. 실험을 통해 제안하는 기법이 무선 환경에서 버퍼 언더플로우를 완화시키고 빈번한 품질 변화를 감소시켜 체감 품질을 향상시키는 것을 확인하였다.

• Ocean and Polar Research
• /
• 제26권4호
• /
• pp.679-684
• /
• 2004

To determine if Antarctic krill employ body shrinkage as one of its overwintering mechanisms in the field, Euphauia superba and Euphausia crystallorophias were collected during fall and winter in and around Marguerite Bay through US Southern Ocean GLOBEC field programs during fall and winter 2001 and 2002. The relationships between the body length and weight of both krill species were exponentially correlated with no significant differences between the two species (p>0.05). The ratio between eye diameter and body length of individual krill was examined in an expectation that it could be used as an indicator of the body shrinkage as previously suggested by Shin and Nicol (2002). These ratios were significantly different between the two krill species. Especially, E . crystallorophias had bigger eyes than E. superba. In both krill species, eye diameters were highly correlated with body lengths (regression coefficients ${\geq}0.70$). For E. crystallorophias, no significant differences of the ratio of eye diameter/body length were detected between fall and winter. Even though the ratios for E. superba were seasonally varied, it was not clear whether body shrinkage was an actual and critical overwintering mechanism for the krill population found in this study area. These results suggest that some individuals of E. superba might experience the body shrinkage during a part of their liff, but this morphological index alone (eye diameter/body length) may be insufficient to unambiguously separate the shrunk krill from the non-shrunk ones in the field-collected animals.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권6호
• /
• pp.769-776
• /
• 2004

Data from 24 feeding trials conducted on lactating cattle from different institutes across India were subjected to regression analysis to derive requirements of ME, TDN, CP and DCP for maintenance, milk production and body weight gain. Maintenance requirements for ME, TDN, CP and DCP were 598 KJ, 39.5 g, 6.27 g and 2.90 g/kg $W^{0.75}$, respectively and the corresponding requirements for production of 1 kg 4% FCM were 5,023 KJ, 332 g, 82 g and 58 g. The corresponding requirements for one g gain in BW were 27 KJ, 1.78 g, 0.44 g and 0.19 g. Regression equations had high $R^{2}$ values (0.67 to 0.90) and the equations (Fvalue) as well as coefficients were highly significant (p<0.001). Regressed values were used to develop feeding standards. Derived values matched well with the actual intake versus performance of animals under diverse feeding conditions. The new standards so derived predicted requirements and intake of nutrients for different production levels better than existing feeding standards; as these are based on a more thorough analysis of a larger database, the new feeding standards will be appropriate for wide use in India.

• 한국멀티미디어학회논문지
• /
• 제13권11호
• /
• pp.1575-1585
• /
• 2010

성공적인 프로젝트 수행을 위해서 개발초기 단계에서 소프트웨어 개발노력 등 자원을 예측하는 것은 매우 중요하다. 그리고 이는 소프트웨어 규모를 통해 가능하며, 소프트웨어 규모 산정 방식의 최근 동향은 프로그램 라인 수(LOC)와 같은 개발자 관점의 접근방식 보다는 사용자가치 중심의 산정방식인 기능점수 분석기법(FPA)을 보다 선호하고 있다. 따라서 본 논문에서는 사례연구를 통해 실제 투입되는 개발노력을 측정하고, 완전기능점수 기법 매뉴얼에 따라 COSMIC Function Point를 직접 계산하였다. 그리고 산출된 데이터에 대한 회귀분석을 통해 COSMIC-FFP기반 소프트웨어 개발노력 추정 모델을 제안한다. 그리고, COSMIC-FFP 기법은 규모를 추정하는데 필요한 기능 요소들에 대한 가중치를 적용하지 않는 단점이 있다. 따라서, 본 연구에서는 제안된 모델의 정확성을 높이기 위해 시스템 복잡도를 가중치로 적용하며, 가중치 추정을 위한 모델도 제안한다.

• Smart Structures and Systems
• /
• 제4권1호
• /
• pp.1-17
• /
• 2008

This study proposes a conceptual framework of in-situ vibration tests and analyses for quality appraisal of non-slender, cast-in-place piles with irregular cross-section configuration. It evaluates a frequency index from vibration recordings to a series of impulse loadings that is related to total soil-resistance forces around a pile, so as to assess if the pile achieves the design requirement in terms of bearing capacity. In particular, in-situ pile-vibration tests in sequential are carried out, in which dropping a weight from different heights generates series impulse loadings with low-to-high amplitudes. The high-amplitude impulse is designed in way that the load will generate equivalent static load that is equal to or larger than the designed bearing capacity of the pile. This study then uses empirical mode decomposition and Hilbert spectral analysis for processing the nonstationary, short-period recordings, so as to single out with accuracy the frequency index. Comparison of the frequency indices identified from the recordings to the series loadings with the design-based one would tell if the total soil resistance force remains linear or nonlinear and subsequently for the quality appraisal of the pile. As an example, this study investigates six data sets collected from the in-situ tests of two piles in Taipu water pump project, Jiangshu Province of China. It concludes that the two piles have the actual axial load capacity higher than the designed bearing capacity. The true bearing capacity of the piles under investigation can be estimated with accuracy if the amplitude of impact loadings is further increased and the analyses are calibrated with the static testing results.

• 한국농공학회지
• /
• 제17권3호
• /
• pp.3885-3893
• /
• 1975

This work was intended to study the cutting graph and vibratory phenomina of a newly developed mower which may be suitable for mowing agricultural product having large and hard stems like corn and sugar beet. The system consists of cutter-bar having Curvilinear-translation motion, which attached to drag-crank mechanism. The motion of equation developed for experimental vibratory system which equipped with the cutter-bar system was established and the parameters defining the system's vibratory motion were experimentally determined. The optimum balancing weight for the cutter-bar am vibratory characteristics of the cutter-bar for various counterweight were analyzed to provide the design and operational conditions. The results of the study are summarized as follows; (1) The cutting graph by the new cutter-bar system depends upon the magnitude of ratio of forward travel(Vm) to crank speed (R$\omega$); The cutting pitch for Vm/R$\omega$ 1 (whole cycle cutting) and Vm/R$\omega$=2/$\pi$ (a half cycle cutting) are 2$\pi$ Vm and 4R, respectively. (2) The experimental vibratory system had been proved to function adequately so that it can be used in determining the required counterweight to minimize the vibratory motion of cutter-bar. (3) Experimentally determined counterweight to give the least vibratory motion was a little greater than the theoretically determined one. With the optimum counterweight it was possible to reduce up to about 87% of the amplitude without counterweight, which may be considered to be within safe operational region. (4) To avoid the actual operation of the cutter-bar at resonance which occured in low frequency ratio, it was considered that the rotational speed of the crank for a specific design of mower should be determined separately in connection with the desired cutting graph.

• Journal of Korean Neurosurgical Society
• /
• 제53권3호
• /
• pp.167-173
• /
• 2013

Objective : There are many cases in which degenerative changes are prevalent in both the cervical and lumbar spine, and the relation between both spinal degenerative findings of MRI is controversial. The authors analyzed the prevalence of abnormal findings on MRI, and suggested a model to explain the relationship between cervical and lumbar disc in asymptomatic Korean subjects. Methods : We performed 3 T MRI sagittal scans on 102 asymptomatic subjects (50 men and 52 women) who visited our hospital between the ages of 14 and 82 years (mean age 46.3 years). Scores pertaining to herniation (HN), annular fissure (AF), and nucleus degeneration (ND) were analyzed. The total scores for the cervical and lumbar spine were analyzed using correlation coefficients and multiple linear regression with various predictive parameters, including weight, height, sex, age, smoking, occupation, and sedentary fashion. Results : The correlation coefficients of HN, AF, and ND were 0.44, 0.50, and 0.59, respectively. We made the best model for relationship by using multiple linear regression. Conclusion : The results of the current study showed that there was a close relationship between the cervical score (CS) and lumbar score (LS). In addition, the correlation between CS and LS, as well as the LS value itself, can be altered by other explanatory variables. Although not absolute, there was also a linear relationship between degenerative changes of the cervical and lumbar spine. Based on these results, it can be inferred that degenerative changes of the lumbar spine will be useful in predicting the degree of cervical spine degeneration in an actual clinical setting.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2290-2295
• /
• 2005

In this paper, it is developed simulator system of 3 D.O.F parallel robot for educate of expertness. This simulator system is composed of three parts ? 3 D.O.F parallel robot, controller (hardware) and software. First, basic structure of the robot is 3 active rotary actuator that small geared step motor with fixed base. An input-link is connected to this actuator, and this input-link can connect two ball joints. Thus, two couplers can be connected to the input-link as a pair. An end-plate, which is jointed by a ball joint, can be connected to the opposite side of the coupler. A sub-link is produced and installed to the internal spring, and then this sub-link is connected to the upper and bottom side of the coupler in order to prevent a certain bending or deformation of the two couplers. The robot has the maximum diameter of 230 mm, 10 kg of weight (include the table), and maximum height of 300 mm. Hardware for control of the robot is composed of computer, micro controller, pulse generator, and motor driver. The PC used in the controller sends commands to the controller, and transform signals input by the user to the coordinate value of the robot by substituting it into equations of kinematics and inverse kinematics. A controller transfer the coordinate value calculated in the PC to a pulse generator by transforming it into signals. A pulse generator analyzes commands, which include the information received from the micro controller. A motor driver transfer the pulse received from the pulse generator to a step motor, and protects against the over-load of the motor Finally, software is a learning purposed control program, which presents the principle of a robot operation and actual implementation. The benefit of this program is that easy for a novice to use. Developed robot simulator system can be practically applied to understand the principle of parallel mechanism, motors, sensor, and various other parts.