• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 춘계학술대회
• /
• pp.57-60
• /
• 1993

A finite element-based computer simulation of excimer laser susery was conducted to study some factors on the surgery. In particular, the radius of curvature at the apex of the cornea was examined under various surgical conditions. Corneal tissue was assumed to be a nearly incompressible, linear elastic, homogeneous, isotropic material under very small deformation. The geometry of the human cornea was taken from the experimental data[1]. The simulation utilized ANSYS(Swanson Analysis System Inc.Rev.4.4A). In this study, the major factors which affect the outcomes of the excimer laser surgery were investigated. First, two patterns of surgery with various surgery thickness(40-70micrometers) were examind. The pattern#1 describes the meridian from the apex to the edge of the surgery area to be straight. And the corresponding meridian of the pattern 2 can be expressed as a quardratic function. The results show that the pattern #2 is more realistic and effective. Then, the effects of other factors were investigated based on the pattern #2. Other factors are:various diameters of the surgical area (3-8 milimeters), Young's modules(3.5-4.5MPa), and depth of surgery at the apex(40-70micrometers). Compared with the computer simulation of the radial keratotomy surgery[2], the excimer laser surgery was proven to be more effective in treating myopia patients. In conculusion, the results of the simulation are qualitative agreement with clinical experience[3] indicating the potential of the finite element model of the surgery as a guideline to the surgeon before actual surgery.

• 한국지진공학회논문집
• /
• 제13권1호
• /
• pp.53-60
• /
• 2009

지진격리 구조물은 하부구조에서 상부구조로 전달되는 지진력의 현저한 감소가 요구되는 경우 고감쇠 고무받침(HDRB)과 같은 지진격리받침을 사용하는 구조물로서 내진설계의 도입 이후부터 많이 설계, 시공되고 있다. 적층고무받침은 지진격리장치에서 가장 중요한 구조부재이다. 적층형 고무받침의 기본 특성은 압축시험, 압축전단시험, 크리프시험 등을 통하여 얻는 것이 일반적이다. 본 연구에서는 축 응력 7.5MPa, 8.37MPa인 지진격리받침(고감쇠 고무받침)을 실물크기로 제작하여 실험실에서 1000시간동안 크리프 시험을 실시하였다. 고감쇠 고무받침과 같은 지진격리받침을 실제 교량환경 상태에서 장기간 압축 크리프 시험한 결과 1000시간 후 최대크리프 변형은 전체 고무두께의 $0.3{\sim}1.92%$로 변형하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3593-3599
• /
• 2010

In an original effort, this lab attempted to employ polystyrene nanoparticles as a template for the synthesis of ordered and highly porous macroporous $SiO_2$ thin films, utilizing their high combustion temperature and narrow size distribution. However, polystyrene nanoparticle thin films were not obtained due to the low interaction between individual particles and between the particle and silicon substrate. However, polystyrene-polyacrylic acid (PS-AA) colloidal particles of a core-shell structure were synthesized by a one-pot miniemulsion polymerization approach, with hydrophilic polyacrylic acid tails on the particle surface that improved interaction between individual particles and between the particle and silicon substrate. The PS-AA thin films were spin-coated in the thickness ranges from monolayer to approximately $1.0\;{\mu}m$. Using the PS-AA thin films as sacrificial templates, macroporous $SiO_2$ thin films were successfully synthesized by vapor deposition or conventional solution sol-gel infiltration methods. Inspection with field emission scanning electron microscopy (FE-SEM) showed that the macroporous $SiO_2$ thin films consist of interconnected air balls (~100 nm). Typical macroporous $SiO_2$ thin films showed ultralow refractive indices ranging from 1.098 to 1.138 at 633 nm, according to the infiltration conditions, which were confirmed by spectroscopy ellipsometry (SE) measurements. This research shows how the synthetic control of the macromolecule such as hydrophilic polystyrene nanopaticles and silicate sol precursors innovates the optical properties and processabilities for actual applications.

• 대한기계학회논문집
• /
• 제11권3호
• /
• pp.376-385
• /
• 1987

본 연구에서는 평면응력 파괴인성치의 거동에 관한 일련의 연구로서 위와 같 은 점을 고려하여 얇은 두께의 시험편을 이용하여 z의 변화에 대한 평면응력 파괴인성 치와 J저항곡선을 실험적으로 고찰하였으며 크랙성장을 고려한 J적분식도 검토하였다. 크랙길이는 하중제거 컴플라이언스법에 의하여 구하였고, ASTM E813의 방법으로J= .sigma.$_{f}$ .DELTA.(2ａ)인 크랙둔화선과 J저항곡선의 교점에서 구한 J적분값을 J$_{c}$로 정 의하였다. 또한, 재료를 변형경화재료로 가정하여 HRR응력변형율장의 특성을 이용 하여 J적분값을 구한 후 실험치와 상호 비교 검토하였다.이때 입력자료는 실험치의 그것과 동일하게 하였다. 동시에 z의 변화에 대한 T의 변화도 함께 고찰하였다.다.

• 디자인학연구
• /
• 제15권3호
• /
• pp.63-72
• /
• 2002

우리 일상생활에서 밀접하게 접하고 사용하고 있는 샤프펜슬에 사용편의성(쓰기 편한 정도)을 1.사용 전 보았을 때 예전 경험치로 직감적으로 느끼는 감, 2.직접 잡았을 때 느낌(착용감), 3.직접 종이 위에 쓰면서 느끼는 느낌 (필기감), 이 세 가지 주요평가항목으로 설정한 후 36개의 대표샘플을 가지고 실증적 실험방법으로 서로의 관계 및 직접 영향을 미치는 항목을 구체적으로 밝혔다. 본 연구에서는 사용편의성과 사용 전 보았을 때 예전 경험치로 직감적으로 느끼는 감의 항목에서는 서로는 높은 상관관계는 없었다. 이는 경험치에서 얻은 기대치가 실제로 사용에서는 기대치에 미치지 못하였기 때문이라고 판단한다. 사용편의성과 착용감, 필기감은 높은 상관관계를 가지고있었다. 이는 사용편의성에 있어 착용감과 필기감은 서로 밀접한 관계이기 때문이라고 판단한다. 사용편의성이 좋은 샤프펜슬은 구조적으로 전체길이가 길며(169mm), 굵기는 보통(8.5mm), 무게는 약간 무거운(21.4g), 중심은 야간 아래쪽인(60mm)에 위치하며, 단면형상은 정원이 아닌 변형형상이며, 손가락 접지부의 표면처리는 가로 홈이 나있는 것이고, 몸통은 광택이 있는 것으로 나타났다.

• 한국압력기기공학회 논문집
• /
• 제8권3호
• /
• pp.13-22
• /
• 2012

According to recent research on leak-rate estimates to assess rupture probabilities of nuclear piping which contains a circumferential surface/through-wall cracks due to PWSCC, i.e., xLPR (Extremely Low Probability of Rupture) program, it has been revealed that the use of crack shape with an idealized circumferential through-wall crack during actual crack growth can lead to overestimate of the leak-rate. Thus, for accurate estimation of the leak-rate during crack growth, the more realistic crack shape that can simulate the crack shape transition from surface crack to through-wall crack should be used. In this context, in the present study, the elastic crack opening displacement of slanted circumferential through-wall crack in thick-walled cylinder was proposed based on 3-dimensional elastic finite element fracture mechanics analyses. To propose the elastic crack opening displacement of slanted circumferential through-wall crack in thick-walled cylinder, the geometric variables affecting crack opening displacement, i.e., thickness of cylinder, reference inner crack length and slant crack ratio were systematically varied. In terms of loading conditions, axial tension, global bending moment and internal pressure were considered. The present results can be applied to calculate the leak-rate considering more realistic crack shape transition from surface crack to idealized through-wall crack, and can be expected to enhance current leak-rate estimation scheme, for instance, in xLPR program etc.

• 센서학회지
• /
• 제15권4호
• /
• pp.237-244
• /
• 2006

Atomic force microscope (AFM) has become a common tool for the structural and physical studies of biological macromolecules, mainly because it provides the ability to perform experiments with samples in a buffer solution. In this study, structure of proteins and nucleic acids has been studied in their physiological environment that allows native intermolecular complexes to be formed. Cr and Au were deposited on p-Si (100) substrate by thermal evaporation method in sequence with the thickness of $200{\AA}$ and $500{\AA}$, respectively, since Au is adequate for immobilizing biomolecules by forming a self-assembled monolayer (SAM) with semiconductor-based biosensors. The SAM, streptavidin and biotin interacted each other with their specific binding energy and their adsorption was analyzed using the Bio-AFM both in a solution and under air environment. A silicon nitride tip was used as a contact tip of Bio-AFM measurement in a solution and an antimony doped silicon tip as a tapping tip under air environment. Actual morphology could also be obtained by 3-dimensional AFM images. The length and agglomerate size of biomolecules was measured in stages. Furthermore, $R_{a}$ (average of surface roughness) and $R_{ms}$ (mean square of surface roughness) and surface density for the adsorbed surface were also calculated from the AFM image.

• Journal of Astronomy and Space Sciences
• /
• 제30권4호
• /
• pp.307-314
• /
• 2013

Infrared optical systems are operated at low temperature and vacuum (LT-V) condition, whereas the assembly and alignment are performed at room temperature and non-vacuum (RT-NV) condition. The differences in temperature and pressure between assembly/alignment environments and operation environment change the physical characteristics of optical and opto-mechanical parts (e.g., thickness, height, length, curvature, and refractive index), and the resultant optical performance changes accordingly. In this study, using input relay optics (IO), among the components of the Immersion GRating INfrared Spectrograph (IGRINS) which is an infrared spectrograph, a simulation based on the physical information of this optical system and an actual experiment were performed; and optical performances in the RT-NV, RT-V, and LT-V environments were predicted with an accuracy of $0.014{\pm}0.007{\lambda}$ rms WFE, by developing an adaptive fitting line. The developed adaptive fitting line can quantitatively control assembly and alignment processes below ${\lambda}/70$ rms WFE. Therefore, it is expected that the subsequent processes of assembly, alignment, and performance analysis could not be repeated.

• Restorative Dentistry and Endodontics
• /
• 제25권2호
• /
• pp.180-192
• /
• 2000

One bottle system was recently developed in order to simplify the clinical skills and save chair time after continuous improvements on dentin bonding agents. There has been many studies to measure the bond strength of one bottle systems but no actual work has been done on micromorphologic study of resin-dentin interdiffusion zone after one bottle system application. To evaluate the bonding patterns of various commercially available one bottle systems to dentin, observation of resin-dentin interdiffusion zone under TEM was performed. Caries-free human third molars within one month of extractions were chosen for the experiments. The molars were sectioned 1mm above the cementoenamel junction and got rid of the root portions. Crown portions of the teeth were sectioned parallel to occlusal surface so that dentin discs of 1mm in thickness were remained. 7 one bottle systems and 1 two bottle system were applied according to manufacturer's instructions and followings were the results. 1. In every experimental groups, cross bandings of collagen fiber were distinguishable and tight bon dings between the bonding agents and dentin were observed. 2. Hybrid layer was clearly observed in ONE-STEP$^{(R)}$, Prime & Bond$^{(R)}$ 2.1, Syntac$^{(R)}$ SC, MAC-BOND II groups but it was not clear in Single Bond, D-Liner Dual PLUS, ONE COAT BOND groups. 3. Electron-density of hybrid layer was uniform in pattern in MAC-BOND II, Prime & Bond$^{(R)}$ 2.1 groups but not so uniform in ONE-STEP$^{(R)}$ group. 4. Electron-dense amorphous phase in most superior layer of the resin-dentin interdiffusion zone was characteristically observed in Single Bond, Syntac$^{(R)}$ SC, ONE COAT BOND groups. It can be concluded that bondings between the dentin bonding agents and dentin can be various in pattern according to their chemical compositions and the condition during applications.

• 한국해양공학회지
• /
• 제33권1호
• /
• pp.50-60
• /
• 2019

Recently, problems with excessive vibration of the radar masts of large bulk carriers and crude oil tankers have frequently been reported. This paper explores a design method to avoid the resonance of a radar mast installed on a large ship using various design of experiment (DOE) methods. A local vibration test was performed during an actual sea trial to determine the excitation sources of the vibration related to the resonant frequency of the radar mast. DOE methods such as the orthogonal array (OA) and Latin hypercube design (LHD) methods were used to analyze the Pareto effects on the radar mast vibration. In these DOE methods, the main vibration performances such as the natural frequency and weight of the radar mast were set as responses, while the shape and thickness of the main structural members of the radar mast were set as design factors. From the DOE-based Pareto effect results, we selected the significant structural members with the greatest influence on the vibration characteristics of the radar mast. Full factorial design (FFD) was applied to verify the Pareto effect results of the OA and LHD methods. The design of the main structural members of the radar mast to avoid resonance was reviewed, and a normal mode analysis was performed for each design using the finite element method. Based on the results of this normal mode analysis, we selected a design case that could avoid the resonance from the major excitation sources. In addition, a modal test was performed on the determined design to verify the normal mode analysis results.