• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.179-186
• /
• 2022

In this paper, we design a heart rate measurement system using a web camera. In order to measure the heart rate, face image information is acquired and classified. The face image data is collected from web camera. The heart rate is measured using the collected face image data. We design a function to measure heart rate using input of face information using a web camera in non-contact manner. We design a function that reads face information and estimates heart rate by analyzing face color. An experiment was performed to compare the non-contact heart rate with the actual measured heart rate. The heart rate measurement system using a web camera proposed in this paper is a technology that can be used in various fields. It will be used in sports fields that require heart rate measurement at a low cost.

• 한국의류산업학회지
• /
• 제6권6호
• /
• pp.740-748
• /
• 2004

The purpose of this research is to observe the face types of types of haircut design that is the basis for the completion of a hair styling mainly with case of male college student. For the purpose of this, I carried out direct and indirect observation and measurement for faces of 293 male college student who attended universities in Busan, and measured face types which were classified by the group analysis preferred hair style in order to do actual hair cut design. The result of this research is as follow. This paper conducted the element analysis in regard to the direct and indirect items of face, and it pulled out 5 elements. As a result of group analysis with elements as independent variables, they are classified into4 types. For actual hair cut design, 4 types classified by group analysis and nearing models analyzed. This research bring accurate information classified face types.

• Journal of Acupuncture Research
• /
• 제23권6호
• /
• pp.77-83
• /
• 2006

Objectives : The purpose of this study was to investigate the location of LI20 and ST3 by facial measurement according to Sasang Costitution, Sex and Age. Methods : To collect the photograph of face, we used the face measurement apparatus, and then analysed whether ST3 was located out of the nasolabial sulcus or not. Results : ST3 was located at the lateral to the nasolabial sulcus in 94.9%; 92.1% of Soyangin, 97.7% of Taeumin, 94.4% of Soeumin 92.3% of male, and 92.3% of female according to Sasang Constitution and sex. According to age distribution, the highest percentage(100%) was appeared at $16{\sim}20$ age, and the lowest(91.8%) was appeared at $70{\sim}74$ age. Conclusion : This study suggests that actual measurement would be nessesary with classical literature to determine the location of acupuncture point, and we need more study in other race.

• 한국의류학회지
• /
• 제44권6호
• /
• pp.1163-1177
• /
• 2020

The purpose of this study is to figure out the information needed to improve the shape and size suitability of face-applied mask sheets. The study analyzed the shape of the mask sheet from the scanned images of 50 products of 37 domestic brands. In addition, each measurement of 42 mask sheets were compared and analyzed multilaterally with the 3D measurement dimensions of the faces of men and women in their 20s from the 6th SizeKorea data. Analysis on the shapes of mask sheets indicated that domestic commercial mask sheets are mainly made of single or dual sheets, with slits for enhancing fitness to the three-dimensional face. In the dimensional analysis of Korean men, women and mask sheets, most of the lengths of the mask sheets were significantly larger or smaller than the actual faces of men and women. The horizontal length and vertical length of the forehead above the eyes are significantly shorter, thereby requiring adjustments in the dimensions of this area. In order to improve the size suitability of the mask, it is necessary to adjust the dimensions of the problem area according to the research results as well as diversify the dimensions considering the target layer.

• 유통과학연구
• /
• 제10권12호
• /
• pp.5-11
• /
• 2012

Purpose - This paper proposes measurement models to evaluate the management performance of small and medium-sized retail businesses on the basis of a trading area analysis that compares their proposed revenue to actual revenue in the trading area. Research design, data, methodology - The study proposes measurement models consisting of five stages, namely: (1) district background survey, (2) customer survey, (3) competitor survey, (4) business district survey, and (5) business performance analysis. Results - To identify business districts easily, this study preferred a minor-adjusted method based on the Euclidean distance, as it is simple to employ for the small and medium-sized businesses. This model was applied to select coffee shops in Daejeon. Results indicated that although the targeted shop was not located in an appropriate location, actual sales were higher than expected. Conclusions - Small- or medium-sized retail businesses face difficulties regarding the economies of scale and brand recognition and must choose an appropriate location to ensure management stability. However, such businesses will find it difficult to evaluate their competitive edge accurately using a trading area analysis.

• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.24-36
• /
• 2007

Purpose: Direct anthropometry is an ideal method for preoperative planning and postoperative evaluation in plastic surgery, but it requires highly skilled specialty. Indirect anthropometry, especially photogrammetry, is an alternative method. In photogrammetry, standardized clinical photography is essential. Photogrammetry-based standardized clinical photography has several advantages over direct anthropometry. It is easier to measure and has less chance to make errors during measurement. Furthermore, it is possible to repeat measurements, and available for follow up study based on permanent custody. But, it is still different from actual measurement, and inherently less accurate than anthropometry. Methods: The authors revised the standardized clinical photography and then, carried out photogrammetry using Photoshop(Adobe, U.S.A.), and compared each data with those of anthropometry. The subjects were 50 males and 50 females, undergraduate medical students in twenties. Standard head position was obtained from the wire, fixed to cephalostat which indicates the Frankfort horizontal plane. All photographs were taken at the same situation such as fixed position of light, subject and camera, etc. Results: Total 96 measurements, based on 40 landmarks, consist of linear measurements, angular measurements and inclinations include 3 measurements in head, 22 in face, 15 in orbit, 28 in nose, 16 in lip and mouth, and 12 in ear. Conclusion: Normal photogrammetric data of face of Korean in twenties was obtained. Reliable photogrammetric measurements, not significantly different from anthropometric measurement statistically, accounted for 44 in 96 measurements(45.8%). Anthropometric values different from those of photogrammetric values were obtained by multiplying coefficient by photogrammetric value.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.930-937
• /
• 2004

In tunnel blasting, rock damage and overbreak at excavation limits are strongly related to stability of the tunnel and cost for rock support, and also affect to maintenance after tunnel construction. In this study, many field tests and measurements have been carried out in highway tunnels so that discordance between blast design and practical production blasting could be settled and actual methods of over break control could be proposed through the understanding of the problems in existing blasting patterns. Test blasting in tunnel was carried out many times in two tunnel sites. Also, long hole blasting longer than existing blasting pattern was executed for good grade of rock mass whose RMR value is more than 60. Using the results of test blasting, new standard blasting patterns for two lane tunnel were proposed. As a result of profile measurement after blasting, drilling is a major factor of overbreak. And then the methods for minimizing overbreak were adapted in new blasting patterns.

• Journal of the Korean Wood Science and Technology
• /
• 제31권3호
• /
• pp.35-41
• /
• 2003

The mechanical and physical properties of wood are strongly dependent upon the slope of grain. Specially, tensile strength is more severely affected by the slope of grain. Therefore, tension tests were performed on small thin wood samples made from Pinus radiata with varying the slope of grain. Determining the tensile strength for clear thin wood samples the other variabilities associated with material, size, drying, defects, etc were discarded. Slope of grain was measured by the slope of grain indicator and actual slope of grain was also determined by a protractor. Correlation coefficients between machine measured and actual slope of grain for 40 pieces of 2×20 mm, 300 mm long Pinus radiata were 0.84 for wide face measurement. Results also showed that tensile strength and MOE from stress wave tests decreased with increasing the slope of grain. This study did not establish a relationships for tensile strength and MOE from stress wave with slope of grain. However, the trends of MOEs from stress wave test with both slope of grain are agreed well with Hankinson's equation. Predicted tension strength curve by Hankinson's equation was also agreed well with the experimental data over the range from 0 to 13 degrees for slope of grain.

• Tribology and Lubricants
• /
• 제23권2호
• /
• pp.56-60
• /
• 2007

The main object of this study is to compare the results that have been concluded by the experiment and to estimate the temperature rise that can cause the contacting surface to be damaged. The former studies are based on the Blok and Jaeger formula. By these formulas we assume that two of the contacted objects are a kind of semi-infinite solid and with this assumption we can make a temperature analysis. But this method doesn't consider lubrication conditions and the calculation time requires a lot of time in that we have to face many difficulties in measuring the actual temperature rise. In this study we combines the semi-infinite solid method and the finite volume method to analyze the temperature of the contacting surface. And we measure temperature rise of the contact surface by dynamic thermocouple.

• 한국터널지하공간학회 논문집
• /
• 제2권3호
• /
• pp.25-36
• /
• 2000

본 연구에서는 합리적이고 공학적인 터널 해석 방법을 제시하기 위해, 시공 중 막장에서 관찰된 신뢰성 높은 암석 및 암반 평점분류 방식과 실내시험을 근거로 하는 일반화된 Hoek-Brown의 현장 암반 모델을 현재 시공이 완료된 지하철 터널 공사 현장의 계측자료와 비교 분석하였다. 그 결과로서 실무적인 측면에서의 터널해석을 위한 일반화된 Hoek-Brown 현장 암반모델의 국내 적용성을 제시하고 적용으로 인한 지반 입력물성치에 대한 타당성을 Trueman과 Trunk의 경험적인 추정식으로 검증하고자 한다. 그러나 불량한 암반의 RMR 값은 정확도가 떨어지기 때문에 일반화된 Hoek-Brown의 현장 암반모델의 적용성에 문제가 있으나, 시공 중 계측자료로 보완함으로서 위험도가 높은 불량암반의 적용성을 평가하였다. 본 연구를 통해서 암석의 경험적인 파괴규준인 일반화된 Hoek-Brown 현장 암반모델을 적용하여 변형과 강도에 과한 암반 입력물성치를 결정하는 과정에서 GSI하한치 = RMR-5를 사용함으로서 현장에서 안정해석의 정확도를 높일 수 있음을 알 수 있다. 단, 여기서는 편마암의 mi=33, 풍화암의 최저치 ${\sigma}ci=100t/m^2$ 이고 GSI는 RMR Chart의 해당연도와 상관없이 동일하다는 조건에서 이루어졌다.