• 한국수자원학회논문집
• /
• 제52권1호
• /
• pp.11-19
• /
• 2019

본 연구에서는 인공위성 및 재분석 자료인 Global Land Data Assimilation System (GLDAS), Global Land Evaporation Amsterdam Model (GLEAM), MOD16의 실제증발산량 산출물을 활용하여 한국수자원조사기술원(Korea Institute of Hydrological Survey, KIHS)에서 관리하고 있는 청미천(cheongmicheon farmland site, CFK)과 설마천(seolmacheon site, SMK) flux tower에서 검증하였고, Triple collocation (TC) 방법을 활용하여 자료간의 불확실성 및 상관성분석을 수행하였다. 플럭스타워와의 검증 결과에서는 전반적으로 GLEAM>GLDAS>MOD16순으로 좋은 결과를 나타내었으며, 세가지 산출물의 조합(S1: flux tower vs. GLDAS vs. MOD16, S2: flux tower vs. GLDAS vs. GLEAM, S3: flux tower vs. GLEAM vs. MOD16)을 통한 TC 결과에서는 청미천(설마천)에서 GLEAM>GLDAS>MOD16>flux tower (GLDAS>GLEAM>MOD16>flux tower)순으로 좋은 결과를 나타내었다. TC 분석 결과에서 Flux tower의 error variance와 correlation coefficient가 상대적으로 좋은 결과를 나타내지 못하였으므로, 한반도 지역에서 인공위성과 재분석 자료(GLDAS vs. GLEAM vs. MOD16)만을 활용하여 TC를 적용하였다. 그 결과, GLDAS와 GLEAM이 한반도 영역에서 낮은 error variance 와 높은 correlation coefficient를 나타낸 반면, MOD16의 경우, 농지에서 낮은 correlation coefficient과 높은 error variance를 나타내었다.

• 한국항행학회논문지
• /
• 제16권6호
• /
• pp.982-987
• /
• 2012

본 논문에서는 AWGN 채널에서 특정 판정영역 내에 수신된 샘플들을 이용해 DD(Decision Directed) 방식으로 SNR을 추정하는 경우에 발생하는 SNR 추정 오차에 대해서 분석하였다. 수신기에서 특정 성좌점에 해당하는 기준 판정영역에 수신된 샘플들로 이상적인 수신점과의 에러벡터를 이용하여 SNR을 추정하는 경우, 다른 판정영역에 대응되는 송신심볼이 잡음의 영향으로 기준 판정영역으로 넘어온 샘플들까지 포함되므로, 추정된 신호 성좌점의 평균치가 이동함으로써 DD방식의 SNR 추정이 부정확하게 이루어진다. 이러한 현상을 변형된 확률밀도 함수를 기반으로 설명하고 실제 SNR과 추정 SNR과의 오차를 유도하여 정량적으로 분석하였다. 또한 컴퓨터 시뮬레이션을 통한 SNR 추정오차가 이론적으로 유도된 SNR 추정오차와 일치하고, 제안한 보정기법을 통해 SNR 추정 성능을 크게 개선할 수 있음을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제39권6호
• /
• pp.767-793
• /
• 2011

An efficient edge-based smoothed finite element method (ES-FEM) has been recently developed for solving solid mechanics problems. The ES-FEM uses triangular elements that can be generated easily for complicated domains. In this paper, the complexity study of the ES-FEM based on triangular elements is conducted in detail, which confirms the ES-FEM produces higher computational efficiency compared to the FEM. Therefore, the ES-FEM offers an excellent platform for adaptive analysis, and this paper presents an efficient adaptive procedure based on the ES-FEM. A smoothing domain based energy (SDE) error estimate is first devised making use of the features of the ES-FEM. The present error estimate differs from the conventional approaches and evaluates error based on smoothing domains used in the ES-FEM. A local refinement technique based on the Delaunay algorithm is then implemented to achieve high efficiency in the mesh refinement. In this refinement technique, each node is assigned a scaling factor to control the local nodal density, and refinement of the neighborhood of a node is accomplished simply by adjusting its scaling factor. Intensive numerical studies, including an actual engineering problem of an automobile part, show that the proposed adaptive procedure is effective and efficient in producing solutions of desired accuracy.

• 한국생산제조학회지
• /
• 제22권5호
• /
• pp.852-858
• /
• 2013

In numerical control (NC) machining, a machining error in equipment generally occurs for a variety of reasons. If there is a change in direction in the NC code, the characteristics of the automatic acceleration or deceleration function cause an overlap of each axis of the acceleration and deceleration zones, which in turn causes a shift in the actual processing path. Many studies have been conducted for error calibration of the edge as caused by automatic acceleration or deceleration in NC machining. This paper describes a geometric interpretation of the shape and processing characteristics of the operating NC device. The paper then describes a way to determine a feedrate that achieves the desired tolerance by using linear and parabolic profiles. Experiments were conducted by the validate equations using a three-axis NC machine. The results show that the machining errors were smaller than the machine resolution. The results also clearly demonstrate that the NC machine with the developed system can successfully predict machining errors induced with a change in direction.

• 영어어문교육
• /
• 제13권1호
• /
• pp.111-131
• /
• 2007

This study explores teacher's corrective feedback types in an error treatment sequence in Korean EFL classroom setting. Corrective feedback moves are coded as explicit correction, recast, or initiations to self-repair. The frequency and distribution of each corrective feedback type are examined. But the special focus was given on feedback types eliciting learner's self-repair (clarification request, metalinguistic feedback, elicitation, and repetition of error) because initiations to self-repair are believed to facilitate language learning more than other strategies. The results of the study are as follows. First, there was an overwhelming tendency for teacher to use recasts whereas initiations to self-repair were not used as much as recast (52.4% vs. 29.5%). Second, the teacher tended to select feedback types in accordance with error types: namely, recasts after phonological, lexical, and translation errors and initiations to self-repair after grammatical errors though the differences were not significant. Finally, teacher's belief and students' expectation on corrective feedback were compared with actual corrective feedback representations respectively and some mismatches were found. Though both teacher and the students acknowledged the importance and necessity of self-repair, self-repair were not put into practice as such. Therefore, this study suggests more initiations to self-repair be used for effective language learning.

• 산업공학
• /
• 제24권3호
• /
• pp.187-195
• /
• 2011

The automatic radiopharmaceutical module consists of several 2-way valves, couple of syringes, gas supply unit, heating(cooling) unit and sensors to control the chemical reagents as well as to help the chemical reaction. In order to control the actuators of radiopharmaceutical module, the process is tabulated using spread sheet as like excel. Unlike the common program, a trivial error is too critical to allowed in the process because the error can lead to leak the radioactive reagent and to cause the synthesis equipment failure during synthesizing. Hence, the synthesis process has been validated using graphic simulation while the operator checks the whole process visually and undergoes trial and error. The verification of the synthesis process takes a long time and has a difficulty in finding the error. This study presents a methodology to verify the process algebraically while the radiopharmaceutical module is converted to the network model. The proposed method is validated using actual synthesis process.

• Structural Engineering and Mechanics
• /
• 제16권2호
• /
• pp.219-240
• /
• 2003

One of the most versatile approaches for analyzing the dynamic behavior of structural systems is direct time integration of semi-discrete equations of motion. However responses computed by time integration are generally inexact and hence the corresponding errors would rather be studied in advance. In spite of the various error estimation formulations that exist in the literature, it is accepted practice to repeat the analyses with smaller time steps, followed by a comparison between the results. In this paper, after a review of this simple method and disregarding the round-off errors, a more efficient, reliable and yet simple method for estimating errors and enhancing the accuracy is proposed. The main objectives of this research are more realistic error estimation based on the concept of convergence, approximately controlling the reliability by comparing the actual rate of convergence with the integration method's order of accuracy, and enhancement of reliability by applying Richardson's extrapolation. Starting from the errors at specific time instants, the study is then generalized to cases in which the errors should be estimated and decreased at specific events e.g. peak responses. Numerical study illustrates the efficacy of the proposed method.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.137-144
• /
• 2000

In this paper, a longitudinal control of the lead vehicle for a platoon in IVHS Regulation Layer is proposed. The backstepping method has been used for the controller design. This method has an advantage in that its stability need not be proven since the controller is designed based on the Lyapunov Function. The control object is that the lead vehicle tracks a reference velocity and maintains a safe distance between the inter-platoons while the followers are keeping the speed of the lead vehicle of a platoon. The coordinate of system is transformed to a new coordinate system for its convenience to design controller. The new coordinate system is composed of error and new error variable. The error is the difference between the safe distance and the actual distance of inter-platoons. A new error variable is the difference between the velocity of vehicle and the estimated state of a system operated by the virtual input. The Lyapunov function is obtained based on the variables of new coordinate system. In the computer simulation, several cases have been studied such as when the lead vehicle is tracking the optimal speed. or a lead vehicle of the following platoon tracks the velocity of the previous platoon while maintaining a safe distance. Also a nonlinear engine time constant case has been investigated. All the simulation results show that the designed controller satisfies the control object sufficiently.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권8호
• /
• pp.361-366
• /
• 2001

This thesis proposes a fuzzy logic cross coupled controller for a multi axis servo system. The overall control system consists of three elements: the axial position controller, the speed controller, and a fuzzy logic cross coupled controller. In conventional multi axis servo system, the motion of each axis is controlled independently without regard to the motion of other axes, in which the contour error, defined as the shortest distance between the desired and actual contours is compensated only by the position error of each axis. This decoupled control approach may result in degraded contouring performance due to such factors as mismatch of axial dynamics and axial loop gains. In practice, such systems contain many uncertainties, Therefore, the multi axis servo system must receive and evaluate the motion of all axes for a better contouring accuracy. Cross coupled controller utilizes all axis position error information simultaneously to produce accurate contours. However the existing cross coupled controllers cannot overcome friction, backlash and parameter variation. Also, since it is difficult to obtain an accurate mathematical model of multi axis system, here we investigate a fuzzy logic cross coupled controller method. Some simulations and experimental results are presented to illustrate the performance of the proposed controller.

• 품질경영학회지
• /
• 제34권4호
• /
• pp.78-92
• /
• 2006

While many services appear, it are performed in the various researches about a service. Among them, as to the basic reason for measuring the service level, in order to find out the strategy improving service quality. But the method for measuring quality of services up to date was unable to make it enough the role. This research tried to propose the approach systematically analyzing the human errors in order to improve service quality about the call center which utilizes the information technology. In fact, the human errors was found in the customer contact point in which the actual service is delivered. An interaction between the element for comprising call service was classified into 3 while defining the human error as 3 group. Moreover, the process where a service is delivered was classified according to 5 step and the generated error was measured in each step. The implication of this research looks at the service failure and dissatisfaction as the occurrence of the human errors and illustrates the service quality improvement as a correction or a reduction. This approach is used that service is materially easily understood and is formulated with the quality improvement strategy.