• Korean Journal of Materials Research
• /
• v.10 no.10
• /
• pp.703-708
• /
• 2000

As the engine design changes to get high efficiency and performance of commercial diesel engine, surface w wear of the earn follower becomes an important issue as applied load increasing at the contact face between cam follower and cam. We developed the ceramic cam follower made of sili$\infty$n nitride ceramic which was more wear resistant than the cast iron or sintered metal cam follower. Ceramic cam follower was made by direct brazing of thin ceramic disk to steel body using an active brazing alloy without the interlayer. In-situ crowning(R), resulted from the difference of thermal expansion coefficient between ceramic and carbon steel after direct brazing without any stress-relieving inter]ayer, could be controlled. When a earbon steel was heated above $A_{c1}$ point and then c$\infty$led, the expansion curve represented a hysteresis. Appropriate crowning was achieved below the $A_{c1}$ point(about $723^{\circ}C$) and crowning increased with brazing temperature exponentially above the $A_{c1}$ point. Optimum brazing temperature range was from 700 to $720^{\circ}C$. We developed successfully the ceramic cam follower having appropriate crowning and being inexpensive. Also we could successfully control the crowning of ceramic earn follower by hysteresis behavior of thermal expansion of earbon steel during direct brazing process.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.282-291
• /
• 1993

Joining ${Al}_{2}{O}_{3}$ and STS 304 stainless steel by active metal brazing method with using CuI Owt % Ti and Cu -7 .5wt % Zr insert metal, their interfaces were analyzed and strength of the joint brazed with Cu-7.5wt % Zr insert metal also investigated with shear strength testing method. In brazing with Cu-lOwt% Ti insert metal, the single reaction layer was formed by the reaction with Ti and ${Al}_{2}{O}_{3}$ at the interface between ${Al}_{2}{O}_{3}$ and insert metal, but the double reaction layer was found in brazing with Cu-7.5wt % Zr insert metal because of the difference of their wettability on the surface of ${Al}_{2}{O}_{3}$. Fracture shear strength about 86MPa was obtained from ${Al}_{2}{O}_{3}$/Cu-7.5wt% Zr/STS 304 stainless steel joint and reasonable strength of the joints is attributed to the formation of double reaction layer at the interface.

• Journal of Life Science
• /
• v.7 no.4
• /
• pp.316-321
• /
• 1997

The effects of the silver ion-exchanged water treatment agent (Ag-Os) upon E. coli RB 797 and Bacillus sp. have been discussed in this study. Silver ion causes a number of toxic effects with no known biological function. Silver ion-exchanged water treatment agent (Ag-Os) using oyster shell here showed antimicrobial activities. the soluble form of silver ion in water is more toxic to the growth of Bacillus sp. than that of E. Coli RB 797. The minium amount of Ag-Os needed for growth inhibition is 0.2 mg/ml for E. Coli RB 797 and 0.02 mg/ml for Bacillus sp., which is consistant with the data of the survival cell fraction. Binding studies suggested that binding of silver to the cell surface was a rapid, metabolic-independent process and different from active transport. Bacillus sp. showed more binding than E. Coli RB 797. Reducing substances of the cell cultures in the presence of Ag-Os was detected using Methylen blue as an indicator. From these results, we suggest that Ag-Os is effective as an antimicrobial agent on E. Coli RB 797 and Bacillus sp. and silver binds to the cells through rapid, metabolic-independent process and might complex to sulfur group in the cells for its toxicity.

• Molecules and Cells
• /
• v.28 no.5
• /
• pp.431-439
• /
• 2009

Rice Oryza sativa accelerated cell death and resistance 1 (OsACDR1) encodes a putative Raf-like mitogen-activated protein kinase kinase kinase (MAPKKK). We had previously reported upregulation of the OsACDR1 transcript by a range of environmental stimuli involved in eliciting defense-related pathways. Here we apply biochemical, gain and loss-of-function approaches to characterize OsACDR1 function in rice. The OsACDR1 protein showed autophosphorylation and possessed kinase activity. Rice plants overexpressing OsACDR1 exhibited spontaneous hypersensitive response (HR)-like lesions on leaves, upregulation of defense-related marker genes and accumulation of phenolic compounds and secondary metabolites (phytoalexins). These transgenic plants also acquired enhanced resistance to a fungal pathogen (Magnaporthe grisea) and showed inhibition of appressorial penetration on the leaf surface. In contrast, loss-of-function and RNA silenced OsACDR1 rice mutant plants showed downregulation of defense-related marker genes expressions and susceptibility to M. grisea. Furthermore, transient expression of an OsACDR1:GFP fusion protein in rice protoplast and onion epidermal cells revealed its localization to the nucleus. These results indicate that OsACDR1 plays an important role in the positive regulation of disease resistance in rice.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.500-507
• /
• 1998

Using a sledge net, the benthic amphipods were taken over one cycle of the neap and spring tides in January 1993 at the sandy shore surf zone of Dolsando, southern Korea. From these samples, we investigated the diel and tidal effects on the intraspecific zonation of Pontogeneia rostrata. The density of p. rostrata was higher during neap tide than spring. Of three categories (adult males and females and juveniles), juveniles and males attained to its highest density during neap and spring tides, respectively. Length- frequency data show that the high mortality of juveniles seemed to occur in winter. In the surface at night, it is significant that juveniles were significantly more abundant during neap tide than spring, whereas both adult males and females were more abundant during spring tide than neap. This suggests that the vortical migration patterns of juveniles and adults vary with the type of tides. During flood of spring tide, more than $90\%$ of population collected at the area above the mean sea level (MSL) were adults. With a decrease of female/male ratio, size of males increased there but that of female did not change, indicating an active migration of large males. This behavior can provide an extension of distribution area far large males, and also give a competitive advantage to large male against small one for mate and feeding. Although adult p. rostrata was collected at 100 cm above MSL at night during spring tide, a major portion of population as usually present on the shore below MSL. The center of zonation was restricted from 50 cm to 250 cm below MSL.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.81-98
• /
• 2012

This research aims 1) to analyse the spatial occurrence of red soils, in Korea 2) to predict their spatial distribution using terrain analyses, and 3) to interpret results from the perspective of pedogeomorphological processes. Red soils (often called red-yellow soils) in Korea are frequently found on welldrained plains and gently sloping areas. These soils are widely believed paleo-soils that were formed under hot and humid climatic conditions in the past. The spatial distribution of red soils was derived from the soil map of Korea, and a DEM based soil prediction was developed, based on a continuity equation to depict water and material flows over the landscape. About 64.5% of the red soil occurrence can be explained by the prediction. Close examinations between surveyed and predicted red soil maps show few distinctive spatial features. Granitic erosional plains at the inland of Korea show comparatively low occurrence of red soils, which might indicate active geomorphological processes within the basins. The occurrence of red soils at limestone areas is more abundant than that of the predicted, indicating the influence of parent materials on the formation of red soils. At and around lava plateau at Cheulwon and Youncheon, the occurrence of red soils is underestimated, which might partly be explained by the existence of loess-like surface deposits. There are also distinctive difference of prediction results between northern and southern parts of Korea (divided by a line between Seosan and Pohang). The results of this research calls for more detailed field-based investigations to understand forming processes of red soils, focusing on the spatial heterogeneity of pedological processes, the influence of parent materials, and difference in uplift patterns of the Korean peninsula.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.669-673
• /
• 2003

We fabricated a buried-ridge waveguide laser diode (B-RWG LD) which has more advantages for obtaining lateral single mode operation on the same ridge width and for the planarization of the device surface, compared to the conventional RWG LD. In this LD, the difference of the lateral effective refractive index can be controlled by the thickness of the InGaAsP layer which is grown on the active and the p-InP layers. The InGaAsP multiple quantum well was grown on a n-InP substrate by the CBE. The buried ridge structure was formed by selective wet etchings, followed by liquid phase epitaxy methods. The fabricated LD with the ridge width of 7 ${\mu}{\textrm}{m}$ showed a linear increase of the optical power up to 20 ㎽ without any kinks and a saturated output power of more than 80 ㎽. By measuring the far field pattern, we demonstrate that LDs with the ridge widths of 5 ${\mu}{\textrm}{m}$ and 7 ${\mu}{\textrm}{m}$ were operated in a lateral single mode up to 2.7I$_{th}$ and 2.4I$_{th}$, respectively.ely.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.107-112
• /
• 2011

In this study, photocatalytic degradation and mineralization of bisphenol A (BPA), which has been listed as one of endocrine disruptors, were carried out in the CPC system using $Tio_2$ slurry and UVA irradiation. The degradation efficiency has been investigated under the controlled parameters including initial concentration (5, 10, 20 mg/L), dosage of $Tio_2$ (0.1, 0.5, 1.0 g/L), UVA power (0, 80, 120 W) and temperature (0, 20, 30). At 10mg/L of initial concentration, BPA was degraded above 80% after 10min, BPA were degraded 97% and 49% at 20 mg/L and 30 mg/L, respectively. At $Tio_2$ dosage was 0.1 and 0.5 g/L, the degradations of BPA showed similar trend and were about 70% after 1 hr, and the degradation of BPA was above 80% after 30 min at 1 g/L of $Tio_2$ dosage. The increase of degradation seem to be due to the increase in the total surface area, namely number of active sites, available for the photocatalytic reaction as the dosage of photocatalyst increased. When the UVA power was 120 W, BPA was degraded rapidly above 60% after 10min of reaction time. To investigate the effect of temperature, carried out experiment controlled temperature, there were no significant differences depending on the temperature. After 1hr, the degradation of BPA were 46%, 67%, and 69% at 10, 20 and $30^{\circ}C$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.421-427
• /
• 2015

Angelica gigas Nakai is one of the most widely used herbal medicines and is known to have many pharmaceutical effects including an anti-oxidant, anti-cancer etc. This study was carried out to investigate an effect of fertilization on leaf yield, production of dry-matter and accumulation of pyranocurmarine compounds such as decursin (DE) and decursinol angelate (DA) in Angelica gigas Nakai. Effect of fertilization was determined from response surface regression equation composing of 2 by 3 factorial arrangement of urea, sodium dihydrogen phosphate and potassium chloride. Yield of leaf in Angelica gigas Nakai significantly increased until 100 days after transplanting. Production of leaf also tended to increase with increasing nitrogen fertilization. Model of regression equation showed that leaf production depended upon nitrogen ($Pr>{\mid}t{\mid}$ : 0.087, 0.256 and 0.079). Also, statistical results between nitrogen application level and production of dry-matter showed significant relationship (p<0.05) and contents of dry-matter was highest in 10 kg 10a-1 treatment on 24 Sep. Active compound isolated and purified from leaf and root of Angelica gigas Nakai was identified as DE and DA by gas chromatograph-mass spectrophotometry (GC-MS). Concentration of DA as prevalent compound in leaf was highest on 20 Aug. but decreased on 24 Sep. Amount of DE and DA accumulated in Angelica gigas Nakai significantly increased with growth stages and nitrogen level. The result of our investigation imply that nitrogen fertilization is important factor for production of leaf and accumulation of pyranocurmarine in Angelica gigas Nakai as a medicinal/food materials.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.664-670
• /
• 2021

Stainless steel was applied as bipolar plate (BP) of polymer electrolyte membrane fuel cell (PEMFC) due to high mechanical strength, electrical conductivity, and good machinability. However, stainless steel was corroded and increased contact resistance resulting PEMFC performance decrease. Although the corrosion resistance could be improved by surface treatment such as noble metal coating, there is a disadvantage of cost increase. The stainless steel corrosion behavior and passive layer influence on PEMFC performance should be studied to improve durability and economics of metal bipolar plate. In this study, SUS316L bipolar plate of 25 cm² active area was manufactured, and experiments were conducted for corrosion behavior at an anode and cathode. The influence of SUS316L BP corrosion on fuel cell performance was measured using the polarization curve, impedance, and contact resistance. The metal ion concentration in drained water was analyzed during fuel cell operation with SUS316L BP. It was confirmed that the corrosion occurs more severely at the anode than at the cathode for SUS316L BP. The contact resistance was increased due to the passivation of SUS316L during fuel cell operation, and metal ions continuously dissolved even after the passive layer formation.