• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.1
• /
• pp.81-88
• /
• 2019

Purpose : The purpose of this study was to examine if there is any correlation between pelvic tilt angle and trunk motion and trunk extensor during trunk forward flexion and to measure trunk motion, onset time of trunk motion, and onset time of trunk extensor activation. Methods : The subjects of this study were 42 healthy adults. The subjects had no back pain due to neurological disease and no experience of back surgery. After pelvic tilt angle was measured, each trunk forward flexion was performed three times. Trunk motion and onset time of trunk motion were measured using Myomotion. Four sensors were used, with one located at the upper thoracic (below $C_7$), the lower thoracic ($T_{12}-L_1$), the sacrum ($S_1$), and at the center of the anterior femur. Onset time of trunk extensors (spinalis, longissimus, gluteus medius, gluteus maximus, biceps femoris, and gastrocnemius) activation was measured using a wireless surface EMG. The EMG amplitude was normalized by using the reference voluntary contraction (RVC). The statistical significance of the results were evaluated using Pearson's correlation test. Results : The correlation between pelvic tilt angle and lumbar motion, onset time of pelvis motion, and onset time of gluteus medius activation was statistically significant in a positive direction (p<.05). The correlation between pelvic tilt angle with pelvis motion, onset time of lumbar motion, and onset time of longissimus activation showed a statistically significant negative correlation (p<.05). Conclusion : The study results provide a significant contribution to our understanding of the lumbar load at the initial stage of trunk flexion. Therefore, it may be possible to provide basic data for evaluation and treatment, such as orthodontic treatment for alignment of the spine and back pain. In addition, it is necessary to focus on normal exercise pattern reeducation as well as pelvic correction during exercise in daily life or in industrial fields.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.515-520
• /
• 2007

Recently, the treat of sludge is usually progressed by ocean disposal. But it will be totally banned by content of its heavy metal according to London Dumping Convention, gradually. The stable way of treat of sewage sludge should be examined urgently. To solve the problem, recently, there are efficient and environment-oriented method. One of them is to produce absorbent through the activation. This study produces absorbent through steam activation. As basic experiment, optimum activation condition for preparation of good absorbent is researched through study of the fellowing variables : steam flow rate, activated temperature, activation time. As the result of this with standard on iodine adsorptivity, it is chosen, that steam flow rate "30 mL/hr", activation temperature $"500^{\circ}C"$, activation time "60 minutes". At the time, iodine adsorptivity and yield shown that 228.4 mg/g, 77.23%. And also, by using nitrogen adsorption, SEM and EDS are confirmed that pore development, specific surface area, mean pore size, chemical component and content. Pore developed by steam activation is also confirmed that it is micropore.

• PNF and Movement
• /
• v.21 no.1
• /
• pp.107-117
• /
• 2023

Purpose: The aim of this study is to compare the immediate effects of weight-assisting methods on vastus medialis oblique (VMO) and vastus lateralis (VL) muscle activation, on the VMO/VL muscle activation ratio, and on muscle onset time in healthy subjects when ascending stairs. Methods: Healthy participants were randomly assigned to the belt group (n = 11), hand group (n = 11), and control group (n = 11). In the belt group, a belt was wrapped around the sacrum and pulled forward with both hands, moving the center of weight forward, while ascending stairs. The hand group grasped the hips with both hands and climbed stairs, assisting their weight from the rear and moving the center of weight backward, and the control group climbed the stairs without any intervention. Results: Muscle activation of the VMO decreased significantly after the intervention in the belt and hand groups, and activation of the VL muscle in both groups showed a greater decrease than that of the VMO muscle. Further, the VMO/VL muscle activation ratio increased significantly, with an improvement shown in the order of the belt group, hand group, and control group, while muscle onset time also improved in the order of the belt group, hand group, and control group. Conclusion: The belt group demonstrated the greatest effect across all dependent variables, confirming that in clinical practice, these two weight-assisting methods are more effective interventions during stair ascent for patients with knee joint instability, pain, and imbalance than no assistance.

• Fire Science and Engineering
• /
• v.10 no.4
• /
• pp.13-18
• /
• 1996

A general description of sprinkler activation time in compartment-fire-generated smoke layers is made. For calculation of the time hot layer temperature is obtained from two-layer zonal model and time constant of sprinkler is measured. Upper-layer thickness at the instant of sprinkler activation is also presented with changes of opening area. The output of the present study provide inputs for the interaction modeling of sprinkler spray and compartment fire environment, which simulates fire suppression phenomena. Futhermore, experiments are performed in mock-up with gasoline pool fire in order to evaluate the reliability of the model.

• The Journal of Korean Physical Therapy
• /
• v.21 no.1
• /
• pp.65-71
• /
• 2009

Purpose: Numerous investigators demonstrated that adaptative changes were induced by motor skill acquisition in the central nervous system. We investigated the changes of neuroelectric potential following motor learning with serial reaction time task in young healthy subjects, using electroencephalography (EEG). Methods: Twelve right-handed normal volunteers were recruited, who have no history of neurological dysfunction and were given to written the informed consent. All subjects were assigned to flex to extend the wrist joint or flex the thumb for pressing the matched button as quickly and accurately as possible, when one of five colored lights was displayed on computer screen (red, yellow, green, blue, white). EEG was measured, whenfive types simulations ware presented randomly with equal probabilities of 20% in total 200 times at the pre and post test. And they were scheduled for 30 minutes practice session during two consecutive days in the laboratory. Results: The results showed that the reaction time at the post test was significantly reduced, compared to one of the pre test in serial reaction time task. In EEG map analysis, the broaden bilateral activation tended to be changed to the focused contralateral activation in the frontoparietal area. Conclusion: These findings showed that acquisition of motor skill led to product more fast motor execution, and that motor learning could change cortical activation pattern, from the broaden bilateral activation to the focused contralateral activation. Thus we concluded that the adaptative change was induced by motor learning in healthy subjects.

• Carbon letters
• /
• v.9 no.3
• /
• pp.203-209
• /
• 2008

The objective of this work is to study the feasibility of the preparation of the activated carbon (AC) from coconut tree flowers using high temperature fluidized bed reactor (HTFBR). The activating agent used in this work is steam. The reactor was operated at various activation temperature (650, 700, 750, 800 and $850^{\circ}C$) and activation time (30, 60, 120 and 240 min) for the production of AC from coconut tree flowers. Effect of activation time and activation temperature on the quality of the AC preparation was observed. Prepared AC was characterized in-terms of iodine number, methylene blue number, methyl violet number, ethylene glycol mono ethyl ether (EGME) surface area and SEM photographs. The best quality of AC from coconut tree flowers (CFC) was obtained at an activation temperature and time of $850^{\circ}C$ and 1 hr restectively. The effectiveness of carbon prepared from coconut tree flowers in adsorbing crystal violet from aqueous solution has been studied as a function of agitation time, carbon dosage, and pH. The adsorption of crystal violet onto AC followed second order kinetic model. Adsorption data were modeled using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity $q_m$ was 277.78 mg/g., equilibrium time was found to be 180 min. This adsorbent from coconut tree flowers was found to be effective for the removal of CV dye.

• Journal of Korean Clinical Nursing Research
• /
• v.26 no.2
• /
• pp.198-206
• /
• 2020

Purpose: The rapid response team is a patient safety system that detects symptoms and signs of deteriorating inpatients and provides intervention and treatment. This study analyzed the factors influencing the activation time of the team. Methods: This is a descriptive correlation study that analyzed the electronic medical records of patients activated by the rapid response team. The collection period was from January 2014 to December 2017. We analyzed 278 pieces of data activated by the rapid response team for patients aged 16 years or older at C University S Hospital in Seoul. We employed the SPSS 23.0 program for data analysis. Results: The reasons for activation of the rapid response team were oxygen saturation of less than 90.0%, other causes, and change in consciousness. The most common diagnosis of activated patients was respiratory failure (32.4%). The average activation time was 153.43±286.05 min. The activation time was shortest during convulsions (13.29±7.32 min). For patients with a history of kidney disease (B=0.58, p=.008), in case of surgery (B=0.55, p<.001), if the first symptom is mediated by the physician (B=0.53, p=.007) the active time is often extended. On the other hand, activation time is reduced when consciousness changes (B=-0.51, p=.002), especially when oxygen saturation is below 90.0% (B=-0.64, p<.001). Conclusion: Based on the results of the study, it is expected that patients deteriorating in the general ward would be recognized early, which will help in the effective activation of the rapid response team.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.131-140
• /
• 1993

The activation energy for high temperature creep is associated with stresses, temperatures, straians And the creep strain appears to be a function of a temperature, compensated time, namely $te^{-}$.DELTA.H/RT/, and the stress. In fact this functional relation appears to be isomorphic to material structure by x-ray analyses. Applying this functional relation, the dependance of activation energy for A17075 creep was investigated. The activation energy for creep is insensitive to stress, temperature, structure, and strain. And phenomenological model agrees with experimental creep data.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1571-1584
• /
• 2023

In this study, a numerical analysis was performed as part of an international joint research project to reproduce a real cable tray fire that occurred in the heater bay area of the turbine building of a nuclear power plant. A sensitivity analysis was performed on various input parameters to derive results consistent with the sprinkler activation time obtained from the fire event analysis. For all sensitive parameters, the normalized sprinkler activation time correlated well with the power function of the normalized sprinkler height. A correlation equation was developed to identify the sprinkler activation time at any location when determining the slope or fire growth rate under the conditions assuming a linear or t-squared heat release rate (HRR) time curve. Various cable fire growth assumptions were used to determine which assumption was better to provide the prediction coincident with the information given from the fire event analysis in terms of the sprinkler activation time and total energy generated from cables damaged by fire. In the comprehensive analysis of all the sensitive parameters, the standard deviation of the input parameters increased as the sprinkler height decreased. Within the range of the sensitivity parameter values given in this study, when considering all sprinkler heights, the standard deviation of the cable model change was the largest and that of the overhang position change was the smallest.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.885-895
• /
• 2016

The lowest power mode (passive-standby mode) was proposed for reducing the power consumption of set-top boxes in a standby state when not receiving content. However, low-power set-top boxes equipped with the lowest power mode have been rarely commercialized because of their low-quality user experience. In the lowest power mode, they deactivates almost all of operational modules and processes, and thus require dozens of seconds for activation latency (that is, the latency for activating all modules of the set-top boxes in a standby state). They are not even updated in a standby state because they deactivate their network interfaces in a standby state. This paper proposes an adaptive standby mode scheduling method for improving the user experience of such boxes. Set-top boxes using the proposed method can analyze the activation pattern and find the frequently used time period (that is, when the set-top boxes are frequently activated). They prepare for their activation during this frequently used time period, thereby reducing the activation latency and enabling their update in a standby state.