• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.21-29
• /
• 2016

To overcome the large ring gear manufacturing problems seen in slewing bearings and girth gears, pin gear drive units have been developed. Among them, a novel slewing bearing with an internal pinwheel gear set (i-PGS) is introduced in this paper. First, we consider the exact cam pinion profile of i-PGS with the introduction of a profile shift coefficient. Furthermore, a new root relief profile modification for the i-PGS cam pinion is presented. Then, the contact stresses are investigated to determine the characteristics of the surface fatigue by varying the shape design parameters. The results show that the contact stresses of i-PGS can be reduced significantly by increasing the profile shift coefficient. In addition, the contact ratio, a measure of teeth overlapping action, decreases with the decrease of the allowable pressure angle.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2058-2064
• /
• 2014

In transformer fault diagnosis, dissolved gas analysis (DGA) is been widely employed for a long period and numerous methods have been innovated to interpret its results. Still in some cases it fails to identify the corresponding faults. Due to the limitation of training data and non-linearity, the estimation of key-gas ratio in the transformer oil becomes more complicated. This paper presents Intuitionistic Fuzzy expert System (IFS) to diagnose several faults in a transformer. This revised approach is well suitable to diagnosis the transformer faults and the corresponding action to be taken. The proposed method is applied to an independent data of different power transformers and various case studies of historic trends of transformer units. It has been proved to be a very advantageous tool for transformer diagnosis and upkeep planning. This method has been successfully used to identify the type of fault developing within a transformer even if there is conflict in the results of AI technique applied to DGA data.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2003.05a
• /
• pp.105-120
• /
• 2003

Academic Capitalism is one of main steams that university has made. Academic Capitalism means that the resource allocation in the university is made by market forces. Persons who advocate the traditional Ivory Tower will resist the market mechanism in university's resource allocation. But, in several aspect, market mechanism has been in action in the university, whether we recognized it or not. In this paper, five directions of Academic System Innovation were suggested. First, competition among universities should be enforced through decentralization and autonomy. Second, competition among researchers shoul be enforced. Third, government should enlarge the portion of 'use-inspired basic research'. Fourth, autonomy of research units in a university should be enlarged for university's competitiveness. Five, government should provide the environment for structural coupling between university and regional society.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.16 no.2
• /
• pp.79-79
• /
• 1991

This paper presents an automated visual inspection/measuring system for the door inner panel manufacturing process. The main objective of this research is to develop inspection applications with a machine vision system related to the determination or quantification of parameters such as dimension, shape, quality of surfaces, number of holes in a panel, and presence or absence of specific features. For quality measurements, we showed a subpixel image processing technology that will improve the consistency of results and level of precision. Also presented is a data analysis method th detect process shifts so that corrective action can be undertaken before more defective units are manufactured.

• Archives of Pharmacal Research
• /
• v.14 no.3
• /
• pp.255-260
• /
• 1991

Chitinase was partially purified from Allium fistulosum L (green onion_. Protein fraction precipitated from ammonium sulfate was passed through CM-Sepharose and Sephacryl HR-200. The specific activity of the chitinase was 6.4 units/mg and total recovery was 6.3%. The analysis of the products from the digestion of N-acetychitohexaose indicated that chitinase was endo in action, with oligerms from N-acetylchitobiose to chitotetraose. N-Acetylglucosaminidase from the same species hydrolyzed oligomers obtained from chitinase reaction to lower oligosaccharides. These data demonstrated that chitinolytic system exists in green onion.

• Journal of the Korean Society of Costume
• /
• v.52 no.3
• /
• pp.49-60
• /
• 2002

This study is to study the peculiar world of work that endeavored the stage setting and costume production in Ballet-russe centered around one of 20th representative artist Pablo Picasso and Diaghilev. Picasso worked four pieces ballets such as parade, Le Tricorne, Puchnella, and Le train bleu with Diaghilev. The originality of costume was well represented without losing the whole work's sense of unity. and designed foreasy movement as well as visual effect. As cubic is most common in parade especially, cubic stave costume were introduced at dancing costume of Paris manager and New York manager flrst time in Ballet's history. Picasso used the Cubism for dancer's beautiful appearance and primary color and decoration for oriental feeling. Picasso pursued the beauty and action at the same tome, and tried to represent the stage setting, impersonation and costume towards units, so the Importance of his work has still been referring.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.435-438
• /
• 2008

본 논문에서는 애니메이션을 위해서 얼굴의 특징표현(Action Units)의 조합하는 방법으로 얼굴 모델링을 하기 위한 3D대응점(3D dense correspondence)을 찾는 방법을 제시한다. AUs는 표정, 감정, 발음을 나타내는 얼굴의 특징표현으로 통계적 방법인 PCA (Principle Component Analysis)를 이용하여 만들 수 있다. 이를 위해서는 우선 3D 모델상의 대응점을 찾는 것이 필수이다. 2D에서 얼굴의 주요 특징 점은 다양한 알고리즘을 이용하여 찾을 수 있지만 그것만으로 3D상의 얼굴 모델을 표현하기에는 적합하지 않다. 본 논문에서는 3D 얼굴 모델의 대응점을 찾기 위해 원기둥 좌표계 (Cylinderical Coordinates System)을 이용하여 3D 모델을 2D로 투사(Projection)시켜서 만든 2D 이미지간의 워핑(Warping) 을 통한 대응점을 찾아 역으로 3D 모델간의 대응점을 찾는다. 이것은 3D 모델 자체를 변환하는 것보다 적은 연산량으로 계산할 수 있고 본래 형상의 변형이 없다는 장점을 가지고 있다.

• Korean Management Science Review
• /
• v.16 no.2
• /
• pp.79-92
• /
• 1999

This paper presents an automated visual inspection/measuring system for the door inner panel manufacturing process. The main objective of this research is to develop inspection applications with a machine vision system related to the determination or quantification of parameters such as dimension, shape, quality of surfaces, number of holes in a panel, and presence or absence of specific features. For quality measurements, we showed a subpixel image processing technology that will improve the consistency of results and level of precision. Also presented is a data analysis method th detect process shifts so that corrective action can be undertaken before more defective units are manufactured.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.99-102
• /
• 1997

A neural spike sorting technique has been developed that also has the capability of template learning. A system of software has been written that first obtains the templates by learning, and then performs the sorting of the spikes into single units. The spike sorting can be done in real time. The template learning consists of spike detection based on the discrete Haar transform (DHT), feature extraction by clustering of spike amplitude and duration, classification based on rms error, and fabrication of templates. The developed algorithms can be implemented into real time systems using digital signal processors.

• Clinical and Experimental Pediatrics
• /
• v.63 no.1
• /
• pp.3-7
• /
• 2020

High-flow nasal cannula (HFNC) is a relatively safe and effective noninvasive ventilation method that was recently accepted as a treatment option for acute respiratory support before endotracheal intubation or invasive ventilation. The action mechanism of HFNC includes a decrease in nasopharyngeal resistance, washout of dead space, reduction in inflow of ambient air, and an increase in airway pressure. In preterm infants, HFNC can be used to prevent reintubation and initial noninvasive respiratory support after birth. In children, flow level adjustments are crucial considering their maximal efficacy and complications. Randomized controlled studies suggest that HFNC can be used in cases of moderate to severe bronchiolitis upon initial low-flow oxygen failure. HFNC can also reduce intubation and mechanical ventilation in children with respiratory failure. Several observational studies have shown that HFNC can be beneficial in acute asthma and other respiratory distress. Multicenter randomized studies are warranted to determine the feasibility and adherence of HFNC and continuous positive airway pressure in pediatric intensive care units. The development of clinical guidelines for HFNC, including flow settings, indications, and contraindications, device management, efficacy identification, and safety issues are needed, particularly in children.