• Title/Summary/Keyword: action properties

Search Result 780, Processing Time 0.033 seconds

Geomechanical analysis of elastic parameters of the solid core of the Earth

  • Guliyev, Hatam H.
    • Geomechanics and Engineering
    • /
    • v.14 no.1
    • /
    • pp.19-27
    • /
    • 2018
  • It follows from the basic principles of mechanics of deformable solids relating to the strength, stability and propagation of elastic waves that the Earth's inner core cannot exist in the form of a spherical structure in the assumed thermobaric conditions and calculation values of physico-mechanical parameters. Pressure level reaches a value that is significantly greater than the theoretical limit of medium strength in the model approximations at the surface of the sphere of the inner core. On the other hand, equilibrium state of the sphere is unstable on the geometric forming at much lower loads under the influence of the "dead" surface loads. In case of the action of "follower" loads, the assumed pressure value on the surface of the sphere is comparable with the value of the critical load of "internal" instability. In these cases, due to the instability of the equilibrium state, propagation of homogeneous deformations becomes uneven in the sphere. Moreover, the elastic waves with actual velocity cannot propagate in such conditions in solid medium. Violation of these fundamental conditions of mechanics required in determining the physical and mechanical properties of the medium should be taken into account in the integrated interpretations of seismic and laboratory (experimental) data. In this case, application of the linear theory of elasticity and elastic waves does not ensure the reliability of results on the structure and composition of the Earth's core despite compliance with the required integral conditions on the mass, moment of inertia and natural oscillations of the Earth.

Induction of Mitochondria-mediated Apoptosis by Solanum Nigrum in Leukemia Cells (용규(龍葵) 추출물이 백혈병 세포의 Apoptosis 유도에 미치는 영향)

  • Chang, Gyu-Tae
    • The Journal of Pediatrics of Korean Medicine
    • /
    • v.22 no.1
    • /
    • pp.113-121
    • /
    • 2008
  • Objectives In human myeloid leukemia cells, there are no specific features of apoptosis compared with apoptosis in other cell types. Solanum nigrum L.(SNL) is a deciduous tree, which is widely distributed in Korea with reported anti-tumor, anti-inflammatory and non-specific immune-enhancing properties. Although the plant has been clinically used for treating a variety of diseases, its bioactive ingredients are unknown and its mode of action potential has never been investigated. Thus anti-tumor property of methanol extract was investigated. Methods In this study, anti-tumor property of methanol extract was investigated by determining its in vitro growth-inhibitory effects on human myeloid leukemia cells. XTT proliferation assay, DNA fragmentation, immunoblot analysis, densitometric analysis were used. Results 1. The methanol fraction of the extracts of SNL induced mitochondria-mediated apoptosis in human myeloid leukemia cells. 2. The methanol fraction exhibited relatively higher cytotoxic activity in a dose-dependent manner than chloroform, and hexane fraction. 3. Typical ladder profile of Oligonucleosomal fragments were appeared. 4. The secreted cytosolic cytochrome C level was increased by treatment of methanol fraction. Conclusions Methanol fraction of SNL is capable of inducing apoptosis in human myeloid leukemia cells.

  • PDF

Binary Metal Oxide ($IrO_2-RuO_2$) pH Sensor Prepared by Sol-gel Method (Sol-gel 법을 이용한 이성분 금속산화물 ($IrO_2-RuO_2$) pH 센서)

  • Lee, Jeong-Ran;Oh, Se-Lim;Han, Won-Sik;Hong, Tae-Kee
    • Journal of the Korean Applied Science and Technology
    • /
    • v.31 no.2
    • /
    • pp.190-196
    • /
    • 2014
  • The sol-gel method was used to prepare binary metal oxide ($IrO_2-RuO_2$) pH sensor. The electrodes that mole percent compositions (mol%) of $IrO_2$ and RuO2 were 70:30 and 30:70 were selected. The characterizations of Nernstian response over pH range, response rate, interference on alkaline metals and reproducibility were investigated. Also the electroanalytical properties of these electrodes were evaluated in comparison with a commercial glass pH electrode. The composition of $IrO_2:RuO_2$ 70:30 mol% was chosen as better electrode formulation. The electrode was not susceptible to the action of interfering ions such as $Li^+$, $Na^+$ and $K^+$.

Purification and Characterization of a Bacillus sp. DG0303 Thermostable $\alpha$-Glucosidase with Oligo-l,6-glucosidase Activity

  • Park, Jong-Sung;Kim, Il-Han;Lee, Yong-Eok
    • Journal of Microbiology and Biotechnology
    • /
    • v.8 no.3
    • /
    • pp.270-276
    • /
    • 1998
  • Extracellular ${\alpha}$-glucosidase was purified to homogeneity from moderately thermophilic Bacillus sp. DG0303. The thermostable ${\alpha}$-glucosidase was purified by ammonium sulfate fractionation, ion-exchange chromatography, preparative polyacrylamide gel electrophoresis (PAGE), and electroelution. The molecular weight of the enzyme was estimated to be 60 kDa by SDS-PAGE. The optimum temperature for the action of the enzyme was at $60^{\circ}C$. It had a half-life of 35 min at $60^{\circ}C$. The enzyme was stable at the pH range of 4.5~7.0 and had an optimum pH at 5.0. The enzyme preparation did not require any metal ion for activity. The thermostable ${\alpha}$-glucosidase hydrolyzed the ${\alpha}$-1,6-linkages in isomaltose, isomaltotriose, and panose, and had little or no activity with maltooligosaccharides and other polysaccharides. The $K_m$ (mM) for p-nitrophenyl-${\alpha}$-D-glucopyranoside (pNPG), panose, isomaltose, and isomaltotriose were 4.6, 4.7, 40.8, and 3.7 and the $V_{max}$(${\mu}mol{\cdot}min^-1$$mg^-1$) for those substrates were 5629, 1669, 3410, and 1827, respectively. The N-terminal amino acid sequence of the enzyme was MERVWWKKAV. Based on its substrate specificity and catalytic properties, the enzyme has been assigned to be an oligo-1,6-glucosidase.

  • PDF

A Herbological study on the plants of Alismatales in Korea. (한국산(韓國産) 택사목(澤瀉目) 식물에 관한 본초학적(本草學的) 연구(硏究))

  • Lee, Chang-Gon;Jeong, Jong-Kil
    • The Korea Journal of Herbology
    • /
    • v.21 no.3
    • /
    • pp.35-45
    • /
    • 2006
  • Objectives : The plans can be used for medicinal purposes among Alismatales in korea and examined their effects and distributions. Methods : The examined herbalogical books and research papers which published at home and abroad. Results : 1. There were totaled to 15 genera and 45 species in Alismatales in Korea and among them medicinal plants are 8 genera, 17 species, some 38% in total. 2. Potamogeton genus is main kind enough that it has 14 species among 45 species in the Alismatales , of which medicinal plants are 6 species. 3. The herb is the main medicinal parts of medicinal plants in the Alismatales which is used in 14 species. 4. According to nature and flavor of medicinal plants in the Alismatales , they were classified into cool 8 species; sweet taste 10 in the order. 5. According to meridian propism of medicinal plants in the Alismatales, they were classified into liver meridian 8 species. 6. According to the properties and principal curative action, they were classified into drugs for antifebrile 12 species, drugs for detoxicant 11 , drugs for drain damp 9 in the order. 7. It was noticed that every medicinal plant in the Alismatales is nontoxic. Conclusion : There were totaled to 15 genera and 45 species in Alismatales in Korea and among them medicinal plants are 8 genera, 17 species, some 38% in total.

  • PDF

Efficiency Analysis with Deposition Time of OVC layer in Cu(InGa)$Se_2$ Films (Cu(InGa)$Se_2$ 박막 제조시 OVC층의 증발시간에 따른 광변환효율 분석)

  • Kim, S.K.;Lee, J.L.;Kang, K.H.;Yoon, K.H.;Park, I.J.;Song, S.;Han, S.O.
    • Proceedings of the KIEE Conference
    • /
    • 2002.07c
    • /
    • pp.1587-1589
    • /
    • 2002
  • Photovoltaics is considered as one of the most promising new energy technology, because its energy source is omni present, pollution-free and inexhaustive. It is agreed that these solar cells must be thin film type because thin film process is cost-efficive in the fact that it uses much less raw materials and can be continuous. The defect chalcopyrite material $CuIn_3Se_5$ has been identified as playing an essential role in efficient photovoltaic action in $CuInSe_2$-based devicesm It has been reported to be of n-type conductivity, forming a p-n junction with its p-type counterpart CuInSe2. Because the most efficient cells consist of the $Cu(In,Ga)Se_2$ quarternary, knowledge of some physical properties of the Ga-containing defect chalcopyrite $Cu(In,Ga)_3Se_5$ may help us better understand the junction phenomena in such devices.

  • PDF

A study on the structural changes and the TSC characteristics of epoxy composites cured with acid-anhydride (산무수물 경화된 에폭시 복합체의 구조변화와 TSC특성에 관한 연구)

  • 왕종배;이준웅
    • Electrical & Electronic Materials
    • /
    • v.7 no.1
    • /
    • pp.32-41
    • /
    • 1994
  • In this study, the TSC spectroscopy has been applied to investigate the influence of structural change due to a process of curing reaction on the electrical properties of epoxy composites cured with acid-anhydride. Five TSC peaks appeared in -160-250[.deg.C]: in the low temperature region below glass transition temperature(T$\_$g/), three relaxation mode peaks due to action of side chains, substitution group or terminal groups have been observed, a peak associated with T$\_$g/, appeared in 110[.deg. C] and p peak due to ionic space charges located in 150[.deg.C]. Each peak was separated into elementary peaks by the partial polarization procedure, and the distribution of activation energy and relaxation time were analized to clearify the origin of each peak. Also, overaboundantly added hardener separated a .betha. peak near 10[.deg. C] into two peaks of .betha.$\_$1/(10.deg. C) and .betha.$\_$2/(20.deg. C) according to increasement of forming field, and the separated hardener was oxidated thermally with increasing surrounding temperatures. The expansion of the free volume need in molecular motion and the reduction of the structural packing density through thermal oxidation process increased TSC between .alpha. peak and .betha. peak and decreased T$\_$g/.

  • PDF

Dietary Fiber and Large Bowel Cancer

  • Oku, Tsuneyuki
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.25 no.3
    • /
    • pp.539-549
    • /
    • 1996
  • Large bowel cancer correlates tightly to dietary factors such as dietary fiber and fat. Dietary fiber prevents the large bowel cancer in different modes of action which depend upon physicochemical and fermentable properties. Water-soluble fiber is fermented easily by intestinal microbes producing short chain fatty acids ; in contrast, water-insoluble fiber occurs effectively more rapid transit time due to greater bulk of gut content, though it is unfermentable. Not only short chain fatty acid is utilized in the proximal and distal colon as primary energy source, but also it lowers pH in the colon to normalize cellular differentiation and helps to stimulate peri staltic movement by acting as an osmotic laxative. In particular, butyric acid may also regulate gene expression and cell growth, though it is an important respiratory fuel for the colonocyte. Since dietary fiber and non-digestible oligosaccharides are the major source of butyric acid, this provides a possible link between dietary fiber and oligosaccharide and prevention of large bowel cancer. But, as with many links between dietary fiber and large bowel cancer, a direct casual association has not been established. In addition, RDA of dietary fiber which is 20~25g/day for adult Japanese, appears to be reasonable for the defecation once daily and the prevention of large bowel cancer.

  • PDF

General Pharmacology of Urinary Trypsin Inhibitor (UTI) (Urinary Trypsin Inhibitor (UTI)의 일반약리작용)

  • 성연희;조순옥;이선애;임화경;장춘곤;김학성;강종구
    • Biomolecules & Therapeutics
    • /
    • v.4 no.4
    • /
    • pp.385-390
    • /
    • 1996
  • General pharmacological properties of urinary trypsin inhibitor (UTI) following intravenous administration of 1,000,000 units/kg were examined in terms of effects on central nervous system, cardiovascular system, respiratory system, gastrointestinal system in mice, rats and rabbits. Administration of UTI (1,000,000 units/kg, iv) had no effect on central nervous system; no influences on pentobarbital sleeping time, spontaneous activity, normal body temperature, chemoshock produced by pentylenetetrazole solution, writhing syndromes induced by 0.6% acetic acid solution, and motor coordination of mice. The administration of UTI (1,000,000) units/kg, iv) in rats had no effect on systolic blood pressure and pulse rate. UTI (500,000 units/kg, iv) given to anesthetized rabbits showed no effect on respiratory rate. However, it showed significant elevation of respiratory rate at the concentration of 1,000,000 units/kg. Gastric secretion of rat and intestinal motility of mice were not influenced by the dose of 1,000,000 units/kg. In terms of autonomic nervous system, the material did not show direct effect and inhibitory or augmentative action of histamine- or acetylcholine-induced contraction at the concentration of 2,000 units/ml in the isolated ileum of guinea pig.

  • PDF

A Study on Intelligent On-line Tool Conditon Monitoring System for Turning Operations (선삭공작을 위한 지능형 실시간 공구 감시 시스템에 관한 연구)

  • Choe, Gi-Hong;Choe, Gi-Sang
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.9 no.4
    • /
    • pp.22-35
    • /
    • 1992
  • In highly automated machining centers, intelligent sensor fddeback systems are indispensable on order to monitor their operations, to ensure efficient metal removal, and to initate remedial action in the event of accident. In this study, an on-line tool wear detection system for thrning operations is developed, and experimentally evaluated. The system employs multiple sensors and the signals from these sensors are processed using a multichannel autoegressive (AR) series model. The resulting output from the signal processing block is then fed to a previously tranied artificial neural network (multiayered perceptron) to make a final decision on the state of the cutting tool. To learn the necessary input/output mapping for tool wear detection, the weithts and thresholds of the network are adjusted according to the back propagation (BP) method during off-line training. The results of experimental evaluation show that the system works well over a wide range of cutting conditions, and the ability of the system to detect tool wear is improved due to the generalization, fault-tolearant and self-ofganizing properties of the neural network.

  • PDF