• 한국의류학회지
• /
• 제12권1호
• /
• pp.27-35
• /
• 1988

In order to investigate a practical application of the fibrous adsorbent to heavy metal ions, acrylic fibers were treated with the hydroxylamine solution that was producted by hydroxylamine hydrochloride and potasium hydroxide in a condition of strong alkaline and $70^{\circ}C$. The adsorption mechanism of copper(2) ion on the fibrous adsorbent, that is hydroxylaminated acrylic fibers, was studied. The adsorption of copper(2) ion was explained in terms of the activated adsorption that are formed the complex with the ligand, such as C=N, N-H, NHOH, on the surface of the adsorbent. The activation energy was evaluated to be 3.8 Kcal/mol. and the times of adsorption equilibrium was approximately 10 minutes. The uptake of copper(2) ion was found to be effected with the increase of temperatures and the pH dependence.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.223-228
• /
• 2006

Hydrogels of semi-interpenetrating polymer networks (semi-IPNs) were prepared by two step reactions. Dimethylaminoethyl methacrylate (DMAM) and poly(ethylene glycol)-dimethacrylate (PEGDM) were copolymerized to yield hydrogels, and then acrylic acid (AA) monomer were adsorbed in the hydrogels followed by polymerization of AA to produce semi-IPNs. The swelling behavior of semi-IPNs depends largely on pH of medium, showing that the degree of swelling of the semi-IPNs exhibits a minimum at pH 6.0. It is observed that the elastic modulus of semi-IPNs is closely related to its swelling behavior.

• 대한치과보철학회지
• /
• 제39권6호
• /
• pp.589-598
• /
• 2001

The fracture of acrylic resin dentures remains an unsolved problem. Therefore, many investigations have been performed and various approaches to strengthening acrylic resin, for example, the reinforcement of heat-cured PMMA resin using glass fibers, have been suggested over the years. The aim of the present study was to investigate the effect of short glass fibers treated with silane coupling agent on the transverse strength of heat-polymerized PMMA denture base resin. To avoid fiber bunching and achieve even fiber distribution, glass fiber bundles were mixed with PMMA powder in conventional mixer whose blade was modified to be blunt. Composite of glass fiber($11{\mu}m$ diameter, 3mm & 6mm length, silane treated) and PMMA resin was made. Transverse strength and Young's modulus were estimated. Glass fibers were incorporated with 1%, 3%, 6% and 9% by weight. Plasticity and workability of dough was evaluated. Fracture surface of specimens was investigated by SEM. The results of this study were as follows 1. 6% and 9% incorporation of 3mm glass fibers in the PMMA resin enhanced the transverse strength of the test specimens(p<0.05). 2. 6% incorporation of 6mm glass fibers in the PMMA resin increased transverse strength, but 9% incorporation of it decreased transverse strength(p<0.05). 3. When more than 3% of 3mm glass fibers and more than 6% of 6mm glass fibers were incorporated, Young's modulus increased significantly(p<0.05). 4. Workability decreased gradually as the percentage of the fibers increased. 5. Workability decreased gradually as the length of the fibers increased. 6. In SEM and LM, there was no bunching of fibers and no shortening of fibers.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.11-12
• /
• 2003

The reinforcing effect of single wall carbon nanotubes (SWNTs) on polyacrylonitrile (PAN) fiber were investigated. The tensile fracture images of the composite fibers demonstrate that SWNTs are well dispersed in PAN matrix as bundles (ropes) ca. 20nm in thickness. It was found that SWNTs play a role not only to reinforce but also to toughen the PAN fiber by increasing breaking strain as well as modulus and strength of the fiebrs. The composite fibers exhibited improved dimensional stability at elevated temperature compared to the neat PAN fiber.

• 한국의류학회지
• /
• 제23권7호
• /
• pp.1064-1072
• /
• 1999

Nylon fabric was grafted for the purpose of the development of detergency against the hemoglobin as a protein soil. By free-radical producing chemical initiator systems the graft using acrylic acid(AA) as a hydrophilic vinyl monomer was performed to change surface energies in the presence of ammonium persulfate(APS) as an initiator and then acrylic acid grafted Nylon was treated with NaOH solution. The surface morphology for Nylon-g-NaAA with changing graft rate were studied by scanning electron microscopy (SEM) The properties of the Nylon such as diameter tenacity elongation contact angle and the hemoglobin removal were also investigated. The diameter of grafted Nylon fiber increased as the graft ratio increased. The tenacity of grafted Nylon also increased with increasing graft ratio up to 15% The elongation however decreased gradually according to graft, The contact angle decreased after graft and alkaline treatment. The amount of hemoglobin on the grafted Nylon increased in proportion to the graft ratio. Hemoglobin was easily removed from grafted Nylon while it was difficult to be removed from ungrafted Nylon. The detergency of hemoglobin for grafted Nylon decreased when the graft ratio exceeded 15% The removal of hemoglobin increased markedly with increasing hemoglobin content and revolution speed. Therefore the removal of hemoglobin was improved due to graft and alkaline treatment.

• 한국염색가공학회지
• /
• 제11권2호
• /
• pp.27-37
• /
• 1999

Polypropylene(PP) films were treated with plasma glow discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PP film surfaces were subsequently used for the graft polymerization of acrylic acid and acrylamide in an aqueous solution by heating, respectively. Introduction of acrylic acid and acrylamide on the PP film could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. And introduction of functional group could be confirmed by weight analysis and ESCA. The water contact angle(90$^{\circ}$) of PP film was constant, irrespective of elapsed time, while plasma-treated and functional monomer-grafted PP films were slowly increased with elapsed time, showing the rearrangement of surface polar groups in air condition. The water contact angle$(90^\circ)$ of PP film was decreased by the plasma treatment$(56^\circ)$ and further decreased by the grafting of acrylic acid$(34^\circ)$ and acrylamide$(37^\circ)$, indicating increased hydrophilicity of the modified surfaces. The water contact angle of plasma-treated PP film increased a little as time elapsing. The half-life periods of surface voltage on acrylic acid-(31sec) and acrylamide-grafted PP(42sec) were significantly decreased when compared to those on PP(950sec) and plasma-treated PP film(241sec). In the experiments using acid, basic and disperse dyes, absorbance and $\Delta{E}$ values of functional monomer-grafted PP films were significantly increased than that of oxygen plasma-treated one.

• 폴리머
• /
• 제32권6호
• /
• pp.509-515
• /
• 2008

Acrylic acid 단량체를 방사선 동시조사법으로 폴리프로필렌 멜트 블로운 섬유에 그래프트 반응시켜 PPmb-g-AAc 공중합체를 제조한 후 아민화 반응을 통하여 아민형 이온교환섬유를 합성하였다. 공중합체의 그래프트율은 acrylic acid 단량체의 농도와 총조사선량이 증가할수록 증가하였으며 acrylic acid 단량체의 농도와 총조사선량이 20 v/v%, 4 kGy일 때 140%로 최대치를 나타내었다. Mohr's salt의 최적농도는 $5.0\times10^{-3}$ M로 나타났다. 아민화율은 그래프트율이 증가할수록 증가하여 140%일 때 78.8%로 나타났다. 아민화한 PPmb-g-AAc 공중합체의 함수율은 기재보다 1.5배 정도 높게 나타났으며 이온교환용량은 7.3 meq/g으로 상용 이온교환섬유보다 2$\sim$3배 정도 높게 나타내었다. 합성한 APPmb-g-AAc의 BET 측정결과 PPmb, PPmb-g-AAc 및 APPmb-g-AAc 섬유의 경우 공극의 크기와 비표면적이 각각 $366.1\;{\AA},\;3.71m^2/g$와 $143.3\;{\AA},\;4.94m^2/g$ 및 $40.97\;{\AA},\;8.98m^2/g$로 공극의 크기는 감소하고 비 표면적이 증가하는 경향을 보였다.

• 한국의류학회지
• /
• 제1권1호
• /
• pp.25-29
• /
• 1977

The warmth retentivity of natural and syntheic waddings as bedding stuff, and further, the machanism of heat transmission through conduction, radiation and convection were analysed. The materials used were cotton, silk, and wool as natural waddings, and polyamide, polyester, regular acrylic, conjugate acrylic, regular polyprepylene and conjugate polypropylene as synthetic waddings. The results of this study are as follow: 1. The warmth retentivity is highest in silk. Following silk in descending order is cotton, conjugate acrylic, polyester, regular acrylic, wool, polyamide, conjugate polypropylene and regular polypropylene. There is not any significant relationship between warmth retentivity and the conductivity of the fibers. 2. Transmission by radiation through the fiber waddings is highest in conjugate polypropylene. Following conjugate polypropylene in descending order is regular polypropylene. polyester. polyamide, conjugate acrylic, regular acrylic, wool, cotton, and silk. This is seen to be in nearly reversed order to the abovementioned order of warmth retentivity. In this respect, warmth retentivity with loose fibreous material as in the case of bedding stuff is primarily affected by the interceptive function of the fibers in heat radiation. 3. Warmth retentivity becomes lower with increasing air content of the waddings. This is because heat transmission by radiation incrases as air content increases. The air content increase is due to the fact that the air is unable to intercept heat radiation. In addition, heat transmission accelates in proportion to the increase in convection as the air gap enlarges.

• 대한치과보철학회지
• /
• 제32권3호
• /
• pp.411-430
• /
• 1994

The denture may be fractured accidentally by an impact while outside the mouth, or may be cracked or broken while in service in the mouth. The latter is generally a fatigue failure caused by repeated flexure over a period of time. This investigation compared the flexural fatigue resistance, the impact force and the transverse strength of two denture base materials with and without the grid strengthener, the T300, the T800 and the Kevlar fiber to evaluate the fracture resistance. The distribution and behavior of fibers across fracture lines were examined by Hi-Scope Compact Microvision System. Through analyses of the data from this study, the following conclusions were obtained. 1. The flexural fatigue resistance, impact strength and transverse strength of high impact strength resin were higher than those of conventional heat polymerizing resin, but statistically there was no significant difference(p>0.05). 2. All specimens with and without the grid strengthener did not show significant differences in the flexural fatigue, the impact and the transverse strength test(p>0.05). 3. All specimens reinforced with the T300, the T800 and the Kevlar fiber showed significant increase of the fatigue resistance and the impact force(p<0.05). 4. All specimens reinforced with the T800 and the Kevlar fiber showed significant increase of the transverse strength(p<0.05). 5. All specimens reinforced with the T300, the T800 and the Kevlar fiber exhibited greenstick fractures. The fibers tended to remain enveloped in the resin, resisting pull-out.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.307-309
• /
• 2001

최근 기존 섬유의 부가가치를 높인 여러 가지 기능성 섬유들에 대한 관심이 증가하고 있다. 이러한 기능성 섬유들 중에서 항미생물 특성을 가지는 섬유는 의료용 섬유재료 분야(백의, 환자복, 수건, 마스크, 이불, 내의, 카펫 및 커튼 등) 뿐만 아니라, 근래에는 소비자들이 건강과 쾌적한 생활을 매우 중요시함에 따라 다양한 분야에서 그 수요가 급격히 증가하여 왔다. (중략)