• 제목/요약/키워드: acrylic coating

검색결과 143건 처리시간 0.033초

하도 및 상도 수지에 따른 폴리아닐린 방청도료의 특성 (Characteristics of Polyaniline Anti-Corrosive Coatings with Primer and Top Coating Resins)

  • 김태옥;공승대;박진우
    • 한국응용과학기술학회지
    • /
    • 제24권4호
    • /
    • pp.399-409
    • /
    • 2007
  • Characteristics of polyaniline anti-corrosive coatings with various primer coating resins(epoxy resin, urethane resin, and others) and top coating resins(epoxy and acrylic urethane resins) were investigated through adhesion, acid resistance, alkaline resistance, water resistance, and anti-corrosion tests. As a result, the anti-corrosive properties of the prepared coatings using polyaniline varied with the types of primer and top coating resins. In this condition, the properties of adhesion, chemical resistance, and water resistance were found to be very satisfactory when using emeraldine base (EB) of polyaniline blended with single-packaged urethane and acrylic urethane resins as the primer coatings, and using acrylic urethane resin as the top coatings. Also, the anti-corrosive function of these anti-corrosive coatings was well preserved for 1000 hr in the salt spray experiment.

피혁가공용 수용성 아크릴-폴리우레탄 Hybrid Resin의 합성 및 기계적 특성에 관한 연구 (Study on Mechanical Properties of Waterborne Polyurethane-Acrylic Hybrid Resin for Leather Coationgs)

  • 이주엽;김기준
    • 한국응용과학기술학회지
    • /
    • 제27권2호
    • /
    • pp.188-195
    • /
    • 2010
  • In this study, we experimented that how to synthesis waterborne urethane-acrylic hybrid resin for leather coatings. First of all, We had analyzed data by FT-IR, SEM and TGA for the machanical properties. By TGA analysis polymers showed heat distortion temperature. and by FT-IR measurement we confirmed that synthesis of urethane and acrylic. In the experiment, solvent resistance, polyurethane and acrylic grades 4-5 showed both a high. Tensile strength measured in the waterborne polyurethane > Acrylic emulsion showed strength in the order. Films were obtained by coating the water born resin on leveled surfaces and allowing them to dry at room temperature for 72hrs. After demolding, the films were kept in a desiccator to avoid moisture contant at $25^{\circ}C$ for 45hrs before the measurements. In this result, the mechanical propersies of waterborne polyurethane-acrylic hybrid resin showed that how effect to resin in leather coating between polyurethane content and acrylic content. Therefore, acrylic emulsion had most high solvent resistance glade and waterborne polyurethane had good result in abrasion test and tensile strength.

수분산 아크릴 폴리우레탄과 탄소나노튜브의 혼합에 의한 전도성 코팅용액 제조 (Preparation of Conductive Coating Solutions by Blending Waterborne Acrylic Polyurethane Dispersion with Carbon Nanotube)

  • 허우영;윤동구;송기창
    • Korean Chemical Engineering Research
    • /
    • 제51권1호
    • /
    • pp.73-79
    • /
    • 2013
  • Polycarbonate diol (PCD), isophorone diisocyanate (IPDI)와 dimethylol propionic acid (DMPA)를 출발물질로 하여 수분산 폴리우레탄(waterborne polyurethane dispersion, WPUD)을 합성하였다. WPUD에 아크릴 단량체인 methyl methacrylate (MMA)를 첨가하여 수분산 아크릴 폴리우레탄(waterborne acrylic polyurethane dispersion, AUD)을 합성하였다. 이 AUD와 물에 분산되어 있는 multi-walled carbon nanotube (MWCNT)를 혼합하여 전도성 코팅 용액을 제조한 후 polycarbonate 시트 위에 도포하여 코팅 도막을 형성하였다. AUD 중의 MMA의 첨가량이 증가될수록 코팅 도막의 연필경도, 내마모성 및 내약품성은 향상되었으나 전기 전도도는 감소하였다. 반면에 전도성 코팅 용액 중의 MWCNT의 첨가량이 증가될수록 코팅 도막의 연필경도, 내마모성 및 내약품성은 감소되었으나 전기 전도도는 증가하였다.

The Influence of Hydrotalcite Intercalated with Benzoate on UV Stability of Acrylic Coating

  • Nguyen, Thuy Duong;Nguyen, Anh Son;Thai, Thu Thuy;Pham, Gia Vu;To, Thi Xuan Hang;Olivier, Marie-Georges
    • Corrosion Science and Technology
    • /
    • 제19권1호
    • /
    • pp.16-22
    • /
    • 2020
  • It is important to realize that benzoate was intercalated into hydrotalcite (HTC-Bz) by the co-precipitation method. In this case, acrylic coating with 0.5 wt% HTC-Bz was deposited on carbon steel using the spin coating method. Next, the HTC-Bz structure was characterized by Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). In fact, an ultraviolet vision spectroscopy (UV-Vis) was used to determine the benzoate content in HTC-Bz, and the UV absorption ability of HTC-Bz. Using electrochemical techniques, water contact angle measurement, and thermal-gravimetric analysis, we compared the protective properties before and after QUV test, hydrophobicity and the thermal stability of acrylic coating containing HTC-Bz. The obtained results showed that HTC-Bz with a plate-like structure was successfully synthesized; benzoate was intercalated into the interlayer of hydrotalcite with a concentration of 28 wt%. Additionally, it was noted that HTC-Bz has an UV absorption peak at 225 nm. In conclusion, the addition of HTC-Bz enhanced the UV stability, hydrophobicity and the thermal stability of acrylic coating.

아크릴 코팅의 성분 분석 연구 (Analytical Study for an Acrylic Coating)

  • 김석준
    • 분석과학
    • /
    • 제17권2호
    • /
    • pp.98-107
    • /
    • 2004
  • 본 연구에서는 $^1H$ NMR 분광분석법 및 HPLC를 이용하여 자동차 부품에 사용된 아크릴 코팅의 성분 및 함량을 분석하였다. $^1H$ NMR 분석 결과 아크릴 코팅은 88.40 wt%의 PMMA, 7.05 wt%의 MMA 및 2.36 wt%의 allyl methacrylate를 포함하고 있다. 또한, 고분자 첨가제로 벤조트리아졸 (Hisorb 328) 및 oxanilide 광안정제, BHT 및 DMP가 $^1H$ NMR 스펙트럼에서 확인되었고 정량적으로 측정되었다. 그러나, Bondapak C18 칼럼, 메탄올 이동상, PDA 검출기를 사용한 역상 HPLC 분석을 통해서는 두개의 광안정제만이 확인되었다. 두 광안정제의 함량은 UV-Vis 흡광광도계를 이용한 정량분석법을 통해 측정되고 NMR 분석 결과와 비교하였다. $^1H$ NMR 스펙트럼으로부터 얻은 분석 정보들이 HPLC에서 얻는 것들 보다 우수하였다.

조합기법을 활용한 아크릴 점착제의 점착물성 평가 (Properties of Acrylic Pressure Sensitive Adhesive Performance and Evaluation Using Combinatorial Methods)

  • 박지원;임동혁;김현중;김경만;김형일;유종민
    • 접착 및 계면
    • /
    • 제10권3호
    • /
    • pp.127-133
    • /
    • 2009
  • 아크릴 점착제는 고내구성 및 분자량 조절, 관능기의 도입 등이 용이하여 반도체, 디스플레이, 모바일 기기, 자동차 등의 첨단 산업에서 매우 다양하게 활용되고 있다. 점착제의 점착물성은 산업에서의 적용, 공정관리, 제품의 신뢰성에 지대한 영향을 미치기에 그 중요성이 날로 더해가고 있다. 본 연구에서는 조합기법을 이용하여 아크릴 점착제의 물성 영향인자 가운데 두께의 변화에 따른 점착물성 변화를 살펴보고자 한다. 아크릴 점착제는 2-ethylhexyl acrylate와 acrylic acid로 구성된 기본점착제만을 활용하여 샘플을 제작하였으며, 두께 구배가 가능한 micro applicator를 활용하여 thickness-gradient acrylic PSA 샘플을 제작하였으며, 이를 기존의 코팅법으로 제작한 샘플과 비교함으로써 조합기법의 재현성을 평가하였다.

  • PDF

PCM 캡슐의 크기가 아크릴 코팅의 물성에 미치는 영향 (The Effects of PCM Capsule Sizes on the Properties of Acrylic Coatings)

  • 허순령;이성구;최길영;이재흥;홍근혜;김형중
    • 접착 및 계면
    • /
    • 제6권1호
    • /
    • pp.11-18
    • /
    • 2005
  • 심물질(core)이 상변화물질(Phase Change Material, PCM)이고, 벽물질(shell)이 멜라민 포름알데히드 수지인 마이크로 캡슐을 제조하였다. 제조된 캡슐의 크기가 아크릴 코팅(acrylic coating)의 물성에 미치는 영향을 알아보기 위하여 PCM 캡슐의 크기를 $3{\sim}25{\mu}m$로 조절하여 제조하였다. 제조된 캡슐의 심물질 함량과 캡슐의 크기는 DSC와 SEM을 이용하여 확인하였다. 아크릴 에멀젼은 butyl acrylate, methyl metacrylate와 acrylic acid를 공중합하여 제조하였다. 제조된 PCM 캡슐과 아크릴 에멀젼을 혼합하여 필름으로 제조하였다. 캡슐의 크기가 작을수록 아크릴 코팅 필름 내에 캡슐이 잘 분산됨을 확인할 수 있었고, 캡슐의 크기가 클수록 필름 표면이 매끄럽지 않음을 관찰할 수 있었다. 필름의 수분 흡수율은 PCM 캡슐의 크기에 큰 영향을 받지 않았지만 필름의 인장 강도와 신율은 캡슐의 크기가 작을수록 증가하였다.

  • PDF

아크릴 단량체 종류 변화가 대전방지용 수분산 아크릴 폴리우레탄의 물성에 미치는 영향 (Effect of Types of Acrylic Monomers on Properties of Anti-static Waterborne Acrylic Polyurethane Dispersion)

  • 허우영;윤동구;송기창
    • Korean Chemical Engineering Research
    • /
    • 제52권4호
    • /
    • pp.451-458
    • /
    • 2014
  • Isophrone diisocyanate (IPDI), polycarbonate diol (PCD)과 dimethylol propionic acid (DMPA)를 출발물질로 하여 수분산 폴리우레탄(waterborne polyurethane dispersion, WPUD)을 합성하였다. 이 WPUD에 아크릴 단량체인 methyl methacrylate (MMA), 2-hydroxyethyl methacrylate (HEMA)와 butyl acrylate (BA)를 각각 첨가하여 다양한 종류의 수분산 아크릴 폴리우레탄(waterborne acrylic polyurethane dispersion, AUD)을 합성하였다. 이 AUD와 물에 분산된 다중벽 탄소나노튜브(multi-walled carbon nanotube, MWCNT)를 혼합하여 전도성 코팅 용액을 제조한 후 polycarbonate 시트 위에 도포하여 코팅 도막을 형성하고 물성을 살펴보았다. AUD로부터 제조된 코팅 도막의 연필경도, 내마모성 및 내약품성은 WPUD 보다 향상되었으나, 전기 전도도는 감소하였다. 또한 아크릴 단량체의 종류 변화 실험에서는 코팅 도막의 연필경도는 HEMA를 사용한 경우가 가장 우수하였으나, 내마모성, 내약품성 및 전기 전도도는 MMA를 사용한 경우가 가장 우수하였다.

유화중합에 의한 친환경 전분-아크릴 코팅졸의 합성 (Synthesis of Environmental-Friendly Starch-acrylic Coating Sols by Emulsion Polymerization)

  • 이미춘;문우주;조을룡
    • Elastomers and Composites
    • /
    • 제45권4호
    • /
    • pp.272-279
    • /
    • 2010
  • 전분은 친환경적인 천연자원이다. 건축 재료로서 활용 가능한 전분-아크릴 코팅졸을 유화중합으로 합성하였다. 제조된 합성물은 IR, $^1H$-NMR을 이용하여 구조를 분석하였고, X-ray Diffraction, 발포 시험, 백색도 시험, 광택도 시험과 인장 강도를 측정을 통하여 물리적 특성을 조사하였다. 전분-아크릴 폴리머 메트릭스에서 전분의 무정형 상태는 XRD결과로 알 수 있었다. 에멀젼을 60% $CaCO_3$ 수용액과 1%, 3%, 5% 발포제와 배합하였다. 그 결과 전분과 발포제의 양이 증가할수록 발포율이 증가하였다. 전분과 발포제의 양이 증가하면 인장 강도가 증가하였다. 그러나 전분과 발포제의 증가로 인해 백색도와 광택도는 감소하였다.

무황변 Acrylic Urethane수지의 경화속도에 대한 연구 (A Study on Curing Rate of Non-Yellowing Type Acrylic Urethane Resins)

  • 서차수;박천욱
    • 공업화학
    • /
    • 제5권4호
    • /
    • pp.743-747
    • /
    • 1994
  • Acrylic urethane 수지의 경화반응에서 아크릴수지 중의 carboxylic acid 함유량과 dibutyltin dilaurate(DBTL)의 촉매 효과가 반응속도에 미치는 영향을 검토하였다. 얇은막의 상태에서 acrylic polyol과 지방족 isocyanate의 biuret화합물과의 경화반응은 2차식에 따른다. 그리고 acrylic polyol 중의 carboxylic acid의 양이 반응속도에 미치는 영향은 매우 크며, isocyanate지에 대한 강한 촉매 효과가 나타났다. 한편 carboxylic acid를 함유하지 않은 acrylic polyol에 DBTL을 첨가하면 촉매효과가 많이 나타나지만, carboxylic acid를 함유한 acrylic polyol의 경우에는 그 효과가 적게 나타났다.

  • PDF