• 한국의학물리학회지:의학물리
• /
• 제21권2호
• /
• pp.218-222
• /
• 2010

세기조절방사선치료(intensity modulated radiation therapy, IMRT)는 치료면적을 소조사면으로 나누어 여러 방향에서 방사선이 조사되기 때문에 기존의 치료방법에 비해 많은 MU와 더 긴 치료시간이 요구된다. 통증 및 장애 등으로 인해 장시간 같은 자세를 유지하기 어려운 환자의 경우, 효과적인 치료를 위해서는 선량율을 증가시켜 치료시간을 줄이는 것이 한 방법이다. 본 연구에서는 선량율 변화에 따른 선량 및 선량분포를 측정하고 그 변화를 알아보았다. IMRT 치료계획은 ECLIPSE 시스템(Varian, SomaVision 6.5, USA)을 이용하여, $0^{\circ}$, $72^{\circ}$, $144^{\circ}$, $216^{\circ}$, $288^{\circ}$ 방향의 5문 조사로 계획하였다. 선량율 변화에 따른 선량 및 선량분포 확인을 위해 선량율은 100, 300, 500 MU/min으로 설정하였으며, 선량과 선량분포는 이온함(PTW, TN31014)과 필름(EDR2, Kodak)을 이용하여 각각 측정하였다. 이때 필름 선량계는 아크릴 팬톰에 삽입 후 빔의 조사방향과 나란하게 설치되었고 방사선조사를 위한 선형가속기는 21EX-S (Varian, USA)를 이용하였다. 측정된 필름 선량계는 VXR-16 (Vidar System Corporation)을 이용하여 분석함으로써 선량분포를 확인하였다. 선량율이 증가할수록 CTV를 포함하는 100% 선량분포의 면적이 거의 선형적으로 감소함을 보였다.

• 박물관보존과학
• /
• 제12권
• /
• pp.19-24
• /
• 2011

국립김해박물관에서 발굴 조사가 이루어진 창원 다호리 유적에서 칠기검집에 철검이 끼워져 있는 상태의 칠초철검(漆鞘鐵劍)이 출토되어 이에 대한 보존처리 과정을 소개하고자 한다. 부식되어 상태가 취약한 청동제검심(劍鐔)은 강화제로 사용 중인 Incralac을 도포한 후 현미경을 이용하여 표면의 문양을 노출하였다. 칠기검집의 표면은 이물질을 제거함과 동시에 HPC 2% 수용액를 도포하여 피막을 보호하였다. 이물질 제거가 완료된 칠 표면에는 Caparol binder 5% 수용액를 2~3회 도포하여 보호피막을 형성한 다음 한지와 알루미늄 호일로 감싸 주었다. 이후 우레탄폼으로 유물을 안전하게 고정한 후 뒤집어 뒷면을 위와 같은 방법으로 보존처리를 실시하였다. 두께가 얇은 유물을 지지하기 위해 검집의 뒷면에 한지를 3겹으로 붙여 힘을 받을 수 있도록 하였으며, 내부의 철검은 검집에 도포한 HPC 2% 수용액를 주입하여 굳히는 정도로 마무리하였다. 이후 투명 아크릴 상자에 보관하여, 향후 전시 등에 활용될 수 있도록 하였다.

• Korean Chemical Engineering Research
• /
• 제49권1호
• /
• pp.62-68
• /
• 2011

본 연구에서는 투명 보호필름에 적용할 수 있는 내구성과 연신성이 우수한(MMA-co-GMA-co-AA) 형의 아크릴레이트 공중합체를 합성하였으며 MMA와 AA 간의 중합효율을 높이기 위하여 GMA를 매개제로 선택하였다. GMA의 함량이 증가할수록 아크릴레이트 공중합체의 분자량과 내구성은 개선되었으나 연신성은 떨어졌고 AA의 함량이 증가할수록 공중합체의 분자량과 내구성은 낮아졌으나 반대로 연신성은 개선되었다. MMA의 함량이 30 g인 조건에서, 아크릴레이트 공중합체 막의 내구성과 연신성을 개선할 수 있는 GMA/MMA의 최적 몰 비는 1.6, AA/GMA의 최적 몰비는 1.8이였으며 공중합체의 평균분자량과 Tg는 각각 13,300 g/mol, 136.5 $^{\circ}C$였다. 아크릴레이트 공중합체를 1.4 g/$m^2$ 도포된 필름의 표면경도는 1 H였으며 5, 15% 연신조건에서 연신성이 모두 양호하였다. 도포량을 4.1-4.6 g/$m^2$으로 높으면 표면경도는 3 H로 개선되었다.

• Restorative Dentistry and Endodontics
• /
• 제25권4호
• /
• pp.575-586
• /
• 2000

In this study, adaptation of compomer to saliva contaminated dentin was evaluated with scanning electron microscope(SEM) and confocal laser scanning microscope(CLSM). For the SEM study, the occulusal surfaces of thirty two molar teeth were grounded to exposure dentin surfaces. The specimen were randomly assigned to control and three experimental groups with four samples in each group. In control group, Dyract and F-2000 compomer were bonded on the specimens according to the manufactures direction. Experimental groups were subdivided into three groups. They were contaminated with saliva on dentin surfaces ; Experimental group 1 : Saliva was dried with compressed air. Experimental group 2 : Saliva was rinsed with air-water spray and dried. Experimental group 3 : After polymerization of an adhesive, they were contaminated with saliva, and then saliva was rinsed with air-water spray and dried. Dyract and F-2000 compomer were bonded on saliva-treated dentin surfaces. The interfaces between dentin and compomer were observed with SEM. For the CLSM study, Class V cavities were prepared in buccal and ligual surfacess of thirty two molars. The specimens were divided into control and experimental groups. Class V cavities in experimental group were contaminated with saliva and those surfaces in each experimental groups received the same treatments as for the SEM study. Cavities were applied Prime & Bond 2.1 and F-2000 compomer primer/adhesive that were mixed with fluorescein, and then were filled with Dyract and F-2000 compomer. Specimens were embedded in transparent acrylic resin and sectioned buccolingual1y with diamond wheel saw, and then mounted on cover slide for CLSM study. The interface between cavity and compomer was observed by fluoresence imaging with a CLSM. The results were as follows : 1. In SEM exammination of Dyract group, control group, experimental group 2, 3 showed close adaptation to dentin and hybrid layer of $3{\sim}4{\mu}m$ diameter. Interfacial gap between compomer and dentin in experimental group 1 was wider than in control group. 2. In SEM examination of F-2000 group, adaptation to dentin of control group was closer than Dytact control group, but hybrid-like layer was not observed. Interfacial gap between compomer and dentin in experimental group 1 was wider than in Dyract experimental group 1. 3. In dissolution specimens of Dyract and F-2000 group, resin tags penetrated through dentinal tubules in control group and experimental group 1 and 3, but the penetration of resin tag was irregular and partial in experimental group 1. 4. In CLSM exammination of Dyract and F-2000 group, adhesive patterns of control and experimental groups showed same as in SEM. This result suggests the treatment methods, rinsing & drying, repeating all adhesive procedures, will produce good effect on adaptation of compomer to dentin if the dentin surface or polymerized adhesive is contaminated by saliva.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.97-112
• /
• 1995

The purpose of this study was to evaluate the effect of wetting condition made by drying time on bonding of resin cement to dentin. Freshly extracted bovine teeth were grinded to expose flat dentin surfaces. After the exposed dentin surfaces were treated with pretreatment agents and water rinse, each wetting condition of dentin surfaces was made according to drying times and methods including slight blow bry for I-second by air syringe, blow dry for 20-second by air syringe, and 12-hour dry in desiccator respectively. and then, previously made composite resin specimens were bonded onto each conditioned dentin surface of the specimen using Panavia-21(Kuraray Co.), Bistite(Tokuso Co.), and Choice(use with All bond-2, Bisco Inc.) resin cement according as manufacturer's instruction. Bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured, cohesive failure rate was calculated, and fractured dentin surfaces and acrylic rod sides were examined under scanning electron microscope. The result were as follows ; In the group of bonding with Panavia-21 resin cement, higher tensile bond strength was seen in 12-hour dry group than in I-second and 20-second dry group(p<0.01). In the group of bonding with Bistite resin cement, higher tensile bond strength was seen in 1-second dry group than in 20-second and 12-hour dry group(p<0.01). In the group of bonding with Choice resin cement, no significant differences of bond strength under given drying time were seen. Cohesive failure rates derived from the groups of bonding with Panavia-21 and Choice resin cement were increased with the increase of tensile bond strength in each drying time. On SEM examination of fractured surface, adhesive failure mode with fractured resin tags was mostly seen in wet condition with I-second drying time in the group of bonding with Panavia-21 resin cement, mixed failure mode with shortened and fractured resin tag was seen in the group of bonding with Bistite resin cement, and regardless of drying time, and cohesive-adhesive mixed failure mode with fracture of 'Hollow' typed resin tags was mainly seen in the group of bonding with Choice resin cement.

• Restorative Dentistry and Endodontics
• /
• 제11권1호
• /
• pp.33-41
• /
• 1985

The purpose of this study was to determine the extent of tooth structure crazing when pinhole were drilled in dentin at various distances from the dentionenamel junction, and when pins were inserted by hand wrench and Auto-klutch handpiece. Sixty freshly extracted teeth were embedded in blocks of cold-curing acrylic resin to a level 1mm apical to the cementoenamel junction, the crown of the teeth were removed to a level 1.5mm coronal to the cementoenamel junction. After being sectioned, the cut surface of the teeth were smoothed, and they were divided into 4 groups. Group I : 4 pinholes were drilled with self-threading Minim spiral drill and pins were inserted with hand wrench in fifteen teeth. Group II : 4 pinholes were drilled with self-threading Minim spiral drill and pins were inserted with Auto-klutch handpiece in fifteen teeth. Group III : 4 pinholes were drilled with self-threading Regular spiral drill and pins were inserted with hand wrench in fifteen teeth. Group IV : 4 pinholes were drilled with self-threading Regular spiral drill and pins were inserted with Auto-klutch handpiece in fifteen teeth. The cut surface were then examined microscopically for the presence or absence of craze line. The results were as follows: 1. The self-threading Minim pin groups (Group I & II) produced less craze lines than did the self-threading Regular pin groups (Group III & IV). 2. In the self-threading Minim pin groups, there was more craze lines with hand wrench (Group I) than with Auto-klutch handpiece (Group 11). 3. In the self-threading Regular pin groups, there was more craze lines with hand wrench (Group III) than with Auto-klutch handpiece (Group IV). 4. Placement of the pinhole at 0.0mm from the dentionenamel junction produced more craze lines than placed at 0.5mm, 1.0mm (p<0.05), however there was no statistically significant between the 0.5mm and 1.0mm distance.

• 보존과학회지
• /
• 제29권2호
• /
• pp.127-138
• /
• 2013

최근 현대 예술 작품 재료로 널리 쓰이고 있는 플라스틱은 온, 습도 및 자외선 등 다양한 환경 요인에 노출되어 심각한 손상이 진행되고 있다. 특히 플라스틱은 초기 열화 속도가 매우 빠르고 열화가 시작되면 본래의 모습으로 되돌아갈 수 없음에 따라 플라스틱 작품 보존에 대한 종합적인 연구는 매우 중요하나 국내에서는 현재까지 이에 대한 연구사례가 많지 않다. 이에 본 연구는 국외의 플라스틱 작품의 가치 상승 현황과 영국과 프랑스 등에서 현재 수행되고 있는 과학적 동정 기술 및 세척 방법에 대하여 조사하였다. 또한 PVC, PE, PP, PS, PU 총 5 종의 표준 플라스틱 시편을 제작하여 증류수, 에탄올, 아세톤, 고무 지우개의 4 종에 대한 세척력과 시아노아크릴레이트, 에폭시, 아크릴, 크로로프렌 고무계의 접착제 4 종을 실험하였다. 그 결과 세척제는 에탄올과 아세톤의 효능이 가장 뛰어났으며, 접착제는 시아노아크릴레이트 계와 에폭시 계가 인공 열화 이후에도 효능과 안정성이 뛰어난 것을 확인하였다. 이상의 연구는 향후 우리나라 플라스틱 보존을 위한 기초 연구 자료로 활용될 수 있을 것으로 기대된다.

• 한국수산과학회지
• /
• 제43권6호
• /
• pp.679-686
• /
• 2010

To investigate the contribution of macroalgae to biogeochemical nutrients and carbon cycles, we measured the uptake rates of nutrients and $CO_2$ by Undaria pinnatifida using an incubation method in an acrylic chamber. From January to March 2010, U. pinnatifida was sampled at Ilkwang, a well-known area of macroalgae culture in Korea. The initial and final concentrations of nutrients, dissolved oxygen, total alkalinity, and pH of the chamber water were measured, and production/uptake rates were calculated using concentration changes, chamber volume, and incubation time. The production rate of dissolved oxygen by U. pinnatifida (n = 32) was about $5.4{\pm}4.0\;{\mu}mol\;g_{fw}^{-1\;}h^{-1}$. The uptake rate of total dissolved inorganic carbon (TDIC), calculated by total alkalinity and pH, was $7.9{\pm}6.5\;{\mu}mol\;g_{fw}^{-1}\;h^{-1}$. Nutrients uptake averaged $141.7{\pm}119.2$ nmol N $g_{fw}^{-1}\;h^{-1}$ and $15.0{\pm}9.1$ nmol P $g_{fw}^{-1}\;h^{-1}$. A positive linear correlation ($r^2$ = 9.6) existed between the production rate of dissolved oxygen and the uptake rate of total dissolved inorganic carbon, suggesting that these two factors serve as good indicators of U. pinnatifida photosynthesis. The relationships between fresh weight and uptake rates of nutrients and $CO_2$ suggested that younger specimens (<~50 g fresh weight) are much more efficient at nutrients and $CO_2$ uptake than are specimens >50 g. The amount of carbon uptake by the total biomass of U. pinnatifida in Korea during the year of 2008 was about 0.001-0.002% of global ocean carbon uptake. Thus, more research should be focused on macroalgae-based biogeochemical cycles to evaluate the roles and contributions of macroalgae to the global carbon cycle.

• 콘크리트학회논문집
• /
• 제18권4호
• /
• pp.569-576
• /
• 2006

PC계 2원 공중합체를 분자량이 2080인 MPEG와 (polyethylene glycol methyl ether methacrylate, Mn=2080) 몰 비가 2, 3, 4인 mono-carboxylic aicd(AA acrylic acid)를 사용하여 합성하고, MPEG와 mono-carboxylic aicd에 dicarboxylic acid(ITA, MAL)를 추가하여 3원공중합체를 합성하였다. PC계 2, 3원 공중합체가 시멘트페이스트 수화 반응에 미치는 영향성을 평가하고, 분석하기위해 각각의 시편을 만들어 재령(1일, 3일, 28일)별로 적외선 분광법(FT-IR), X-선 회절분석(XRD), 시차주사열계량법(DSC), 주사전자현미경(SEM)을 사용하여 분석을 실시하였다. 2, 3원 공중합체 모두 재령 1일에서는 다소 수화 반응 속도가 지연되었으나, 시간 경과에 따라 수화 지연은 완화되었으며 3원공중합체보다 2원공중합체가 수화가 더 활발히 진행되었는데 이는 3원공중합체에 비해 상대적으로 2원 공중합체가 가진 낮은 카복실기 함량 때문이다. 2AA계를 적용한 PC계 2원 공중합체의 경우 재령 3일에서 수화반응이 가장 활발하게 일어났고, AA의 몰비가 증가할수록 2원 공중합체의 수화 지연성은 커지는 경향을 나타내었다.

• 대한치과보철학회지
• /
• 제42권6호
• /
• pp.654-663
• /
• 2004

Statement of problem. According to the fracture pattern in several reports, fractures most frequently occur in the interface between the ceromer and the substructure. Purpose. The aim of this in vitro study was to compare the macro shear bond strength and microshear bond strength of a ceromer bonded to a fiber reinforced composite (FRC) as well as metal alloys. Material and methods. Ten of the following substructures, type II gold alloy, Co-Cr alloy, Ni-Cr alloy, and FRC (Vectris) substructures with a 12 mm in diameter, were imbedded in acrylic resin and ground with 400, and 1, 000-grit sandpaper. The metal primer and wetting agent were applied to the sandblasted bonding area of the metal specimens and the FRC specimens, respectively. The ceromer was placed onto a 6 mm diameter and 3 mm height mold in the macro-shear test and 1 mm diameter and 2 mm height mold in the micro-shear test, and then polymerized. The macro- and micro-shear bond strength were measured using a universal testing machine and a micro-shear tester, respectively. The macro- and micro-shear strength were analyzed with ANOVA and a post-hoc Scheffe adjustment ($\alpha$ = .05). The fracture surfaces of the crowns were then examined by scanning electron microscopy to determine the mode of failure. Chi-square test was used to identify the differences in the failure mode. Results. The macro-shear strength and the micro-shear strength differed significantly with the types of substructure (P<.001). Although the ceromer/FRC group showed the highest macroand micro-shear strength, the micro-shear strength was not significantly different from that of the base metal alloy groups. The base metal alloy substructure groups showed the lowest mean macro-shear strength. However, the gold alloy substructure group exhibited the least micro-shear strength. The micro-shear strength was higher than the macro-shear strength excluding the gold alloy substructure group. Adhesive failure was most frequent type of fracture in the ceromer specimens bonded to the gold alloys. Cohesive failure at the ceromer layer was more common in the base metals and FRC substructures. Conclusion. The Vectris substructure had higher shear strength than the other substructures. Although the shear strength of the ceromer bonded to the base metals was lower than that of the gold alloy, the micro-shear strength of the base metals were superior to that of the gold alloy.