• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.134-140
• /
• 2015

This study was carried out to evaluate whether EVAc, acryl latex and biobinder could substitute the part of SB latex for pre-coating color formula or not. Different coating colors prepared through the substitution of 30% SB latex with EVAc, acryl latex, and biobinder were applied for pre-coating layer. 100% SB latex is used as a binder for top coating color. The optical properties, gloss, roughness, stiffness, dry- and wet-pick strength were measured. There were no significant differences in the brightness, whiteness, opacity, roughness, ink set-off and gloss of paper coated with 5 different coating colors. However the stiffness, dry- and wet-pick strength were somewhat lower than those of conventional coating color which 100% SB latex was used as a binder. Although the part of SB latex could be substituted with EVAc, acryl latex and biobinder without sacrificing the qualities of coated paper. Further researches on the improvement of stiffness, dry- and wet-pick strength, and the optimization of rheology of coating color in order to improve the qualities of coated paper are strongly recommended.

• Elastomers and Composites
• /
• v.35 no.3
• /
• pp.196-204
• /
• 2000

SBR, polyurethane, acryl and epoxy latex were separately mixed with ethylene -vinylacetate emulsion(EVA) in the range of $0{\sim}50wt%$. For the mixtures, the various physical properties such as defoamerability, mechanical property, and water resistance were experimentally examined. The excellent defoamer was BYK-021 and the appropriate use of it was 0.3 phr for the total components. The shrinkage of compounds was influenced by the compatability of resins and the formation of voids. The mechanical properties was related to the cohesive force of resin particles, the coagulation of cement particles and the co-bonding of resin particles with cement particles. Mixing latex separately showed better properties then non-mixing in the shrinkage ratio, flexural strength, adhesive strength, and impact strength. The water resistance of composites mixed with cement was worse than that of EVA resin.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.141-146
• /
• 2015

This study was carried out to elucidate the partial substitutability of SB latex with environmental-friendly coating binders for coated paper. Starch-based biobinder, ethylene vinyl acetate and acryl-based binder were evaluated for this purpose. Several combinations of above binders were applied to top layer coating, and properties of coating colors and printability were evaluated. When 20% and 30% of SB latex were substituted by acryl-based synthetic binder, ethylene vinyl acetate and biobinder, the brightness, whiteness and opacity of coated paper were similar to those obtained from SB latex. Ink set and stiffness of coated paper manufactured through 20% and 30% substitution of SB latex by biobinder and EVAc were improved, but dry- and wet-pick strength were decreased. The research works on the improvement of dry- and we-pick strength, mechanical stability and rheological properties at high shear condition should be continued for the commercial application of biobinder, EVAc and acryl-based binder.

• Elastomers and Composites
• /
• v.33 no.5
• /
• pp.324-334
• /
• 1998

SBR, polyurethane, acryl and epoxy latex were seperately mixed with ethylene-vinylacetate emulsion(EVA) in the range of $0{\sim}50%$ (wt.% ). For the mixtures, the various physical properties were examined. The viscosity of mixtures was mainly influenced by compatability with EVA emulsion, was decreased within 20% (wt.% ) of latex content, and showed the similar values over 20% (wt.% ) of latex content. The workable time of cement mixtures was mainly depended on the reactivity with cement. The formation of film could be only within $30{\sim}40$ minutes from mixing cement. The tack-free time of mixtures was influenced by the sorts of resin and the quantity of cement. The slow order of tack-free time was epoxy mixtures>SBR mixtures>urethane mixtures>acryl mixtures. The pencil hardness of mixtures was $4B{\sim}2H$, represented higher value in cement mixtures than in emulsion state.

• KSBB Journal
• /
• v.8 no.4
• /
• pp.320-327
• /
• 1993

Latex microspheres of styrene/acryl copolymer with acrylamide functional group were used for the stable covalent immobilization of an enzyme applicable for enzymatic synthesis of glycoside. The latex microspheres were coated with polyethyleneimine to establish structural and functional properties relevant to the covalent Immobilization with a high retention of activity. Polythyleneimine-coated microspheres satisfactorily immobilized the invertase for methyl fructoside synthesis, and model reaction were formed into alginate-enclosed microspheres biocatalyst. Using the alginate-enclosed microspheres biocatalyst, the yield of model glycoside was obtained as high as 52.2% at concentration of aqueous 30%(v/v) methanol and 0.291mo1/1 sucrose solution with 2U/ml of activity. The present study showed that the latex microspheres were successfully applied to enzymatic synthesis of glycoside.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.327-338
• /
• 2011

This study was carried in order to manufacture the high quality coated paper. High quality includes not only properties of coated paper but also final print quality. In this study, new acrylic-styrene emulsion was polymerized in laboratory and compared with styrene-butadiene latex. Low-shear viscosity of coating color was decreased with increasing acrylic-emulsion dosage. WRV was increased with addition and decreased with substitution of acrylic-emulsion. Paper gloss, brightness and whiteness were increased and PPS and opacity was slightly decreased with acrylic-emulsion. Ink gloss was increased with using No. 3 acrylic-emulsion due to lower ink setting properties. However No.1, 2 emulsion shows opposite situation. Surface strength of coated paper was increased with using No. 3 acrylic-emulsion These results indicate that high quality coated paper can be manufactured with using No. 3 acrylic-emulsion.

• Journal of the Korean Ceramic Society
• /
• v.38 no.2
• /
• pp.122-127
• /
• 2001

수열법으로 합성한 헥토라이트 점토(SHC), 아크릴 라텍스 및 코팅첨가제들을 배합하여 성분이 다른 수성코팅제(WBC-0, WBC-1, WBC-2) 3종류를 제조하였다. 제조한 수성코팅제(WBC)의 pH, 용액점도 및 고형분을 조사하였고, 전단력에 따른 유동성을 레오메타로 측정하였다. 또한 WBC로부터 주조된 필름의 열안정성과 투명성을 각각 TGA와 UV-VIS 분광광도계로 조사하였다. SHC가 8 phr 포함된 WBC-2는 전단력에 따라 졸과 겔의 상전이 현상, 즉 요변성을 나타내었으며 이로 인해 저장안정성이 우수하였다. 주조한 WBC-1과 WBC-2 필름의 초기분해온도와 투명성은 시판 WBC(OP-55W)의 필름보다 각각 99.6~110.2$^{\circ}C$와 20.9~21.7%의 범위로 증가하였다. 결과적으로, SHC가 함유된 WBC는 수팽윤성 점토에 의해 내열성과 용액점도의 증대효과가 나타났다.

• Journal of Fashion Business
• /
• v.12 no.5
• /
• pp.77-93
• /
• 2008

The purpose of the study was to examine make-up expression elements of horror characters as an evil spirit, a vampire, a zombie, a monster and a psycho murderer through make-up, focused on horror movies of the United States after1960s. First, an evil spirit was expressed that the pupil grew dim without a focus and the skin was torn by going bad and rot completely. Also, it was expressed that its teeth was changed to pointed canine teeth as a wild beast and its pale and bloodless face showed blood vessels clearly. To express its bloodless and pale skin, air brush was swept into the skin over several times. Its canine tooth was made acryl powder into its shape and was harden to make its shape smooth. Also, it was colored to show people like the real thing. Second, a vampire was expressed by make-up elements as long nails, a sharp canine tooth, a pale skin with a blood vessel and dead eyes. Its rough skin and long nails were manufactured with latex foam, which was colored like the skin. Third, a monster image as a werewolf was expressed by make-up elements as fur, sharp teeth, changed nails and toenails, a rough skin and a face changed to a wolf. Rubber mask and rubber body suit were manufactured as a make-up of special character and so all its body was changed. Fourth, a psycho murderer and body-deformed man were expressed by make-up elements as a distorted mask, swelled-up and deformed skull and face form, terribly deformed body, discolored and hang down skin and teeth with an indeterminate form. Its body and face were manufactured by the foam latex technology according to make-up design as a make-up of special character.

• Textile Coloration and Finishing
• /
• v.35 no.3
• /
• pp.151-158
• /
• 2023

In this study, we investigated the durability properties of the recycled leather using shaving scrap with antioxidant. Recycled leather sheets were manufactured by mixing shaving scrap and NB latex as a binder. HALS(Hindered Amine Light Stabilizer) and UVA(UV absorbers) were used as antioxidant. Mechanical properties such as hardness, tensile strength, elongation, tear strength and abrasion resistance were measured. Light aging resistance was evaluated using UV lamp and the degree of discoloration of the recycled leather sheets using a gray scale. In addition, to evaluate heat aging and UV aging, the degree of discoloration of the recycled leather sheets over time was measured using colorimeter. Washing fastness was evaluated on the degree of dyeing of recycled leather sheets for six type of multi-fiber woven fabrics (Acetate, Cotton, Nylon-66, Polyester, Acryl, Wool). To determine whether hazardous substances were detected in recycled leather sheets, the contents of arylamine and Cr 6⁺ were evaluated. As a result, when used in combination with antioxidant, the heat aging and light aging of recycled leather were improved and hazardous substance were not detected.