• 한국소음진동공학회논문집
• /
• 제23권3호
• /
• pp.258-266
• /
• 2013

This paper presents the correlation between psychological and physiological acoustics for the automotive acceleration sound. The research purpose of this paper is to evaluate the sound quality of acceleration sound of a passenger car based EEG signal. The previous method for the objective evaluation of sound quality is to use sound metrics based on psychological acoustics. This method uses not only psychological acoustics but also physiological acoustics. For this work, the sounds of 7 premium passenger cars are recorded and evaluated subjectively by 33 people. The correlation between the subjective rating and sound metrics is calculated based on physiological acoustics. Finally the correlation between the subjective rating and the EEG signal measured on the brain is also calculated. Throughout these results the new evaluation system for the sound quality on the automotive acceleration sound of a passenger car has been developed based on bio-signal.

• The Journal of the Acoustical Society of Korea
• /
• 제21권1E호
• /
• pp.12-17
• /
• 2002

Two improvements are discussed in measurement of the complex Young's modulus of the acoustic materials by using the transfer function method. It is found that the accelerometer misalignment might result in the severe measurement error, particularly in high frequency range. The supporting structure is modified to attach the upper and lower accelerometers along the vertical axis. Secondly, the method fur solving the equation associated with wave model is described. The solution of the lumped mass-spring model is chosen as the starting value for low frequency range, while in the mid and high frequency, the solution to the previous frequency step is used as the initial values. Measurements are done for hard and soft rubber specimens. It is shown that the erroneous peaks in the transfer function, due to the measurement error, cause highly incorrect Young's modulus and loss factors.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.719-725
• /
• 2008

In this paper, noise and vibration reduction for floating-floored ship cabin is studied. A mock-up is built by using 6 mm steel plate, and two identical cabins are made for simulation of ship cabins. When a speaker is used as a sound and vibration sources, it is shown that floating floor is more effective in isolating sound than bare deck by 2-5 dB. It is also shown that structure-borne noise of the bare deck is greater than that of floating-floored deck by 3-10 dB. For tapping machine excitation, it is found that the effect of floating floor in airborne noise and structure-borne noise reduction reaches up to 40-50 dB for high frequency ranges.

• 한국전산유체공학회지
• /
• 제8권3호
• /
• pp.21-31
• /
• 2003

A non-dissipative and very accurate one-dimensional upwind leapfrog method is extended to higher-order and multi-dimensional advection and acoustic equations. The higher-order versions are developed by extending the stencils in space and time. The schemes are then successfully applied to the classical test cases for advection and acoustics.

• 소음진동
• /
• 제9권4호
• /
• pp.681-686
• /
• 1999

In a church, speech intelligibility is very important together with the reverberance for musical activities. In order to obtain the primary data of a acoustical design for churches records were refereed and churches were measured in Europe and Japan. And in the base of measurements, those were judged by subjective hearing test. As some results, it has been found that the room acoustics of churches were different in a country and the reverberation time was perferred two seconds for speech intelligibility. However, although personal deviations were admitted, more long echoes were preferred for the music.

• The Journal of the Acoustical Society of Korea
• /
• 제17권3E호
• /
• pp.35-42
• /
• 1998

Transient acoustic and elastic wave propagation in inhomogeneous media are studied by using the Fourier method. It is known that the fourier method has advantages in memory requirements and computing speed over conventional methods such as FDM and FEM, because the Fourier method needs less grid points for achieving the same accuracy. To verify the proposed numerical scheme, several examples having analytic solutions are considered, where two different semi-infinite media are in contact along a plane boundary. The comparisons of numerical results by the Fourier method and analytic solutions show good agreements. In addition, the fourier method is applied to a layered half-plane, in which an elastic semi-infinite medium is covered by an elastic layer of finite thickness. It is showed how to derive the analytic solutions by using the Cagniard-de Hoop method. The numerical solutions are in excellent agreements with analytic results.

• ETRI Journal
• /
• 제34권4호
• /
• pp.583-590
• /
• 2012

In this paper, we present a new approach for speaker diarization. First, we use the prosodic information calculated on the original speech to resynthesize the new speech data utilizing the spectrum modeling technique. The resynthesized data is modeled with sinusoids based on pitch, vibration amplitude, and phase bias. Then, we use the resynthesized speech data to extract cepstral features and integrate them with the cepstral features from original speech for speaker diarization. At last, we show how the two streams of cepstral features can be combined to improve the robustness of speaker diarization. Experiments carried out on the standardized datasets (the US National Institute of Standards and Technology Rich Transcription 04-S multiple distant microphone conditions) show a significant improvement in diarization error rate compared to the system based on only the feature stream from original speech.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2001년도 추계학술발표대회 논문집 제20권 2호
• /
• pp.329-332
• /
• 2001

피아노 향판의 진동 특성은 피아노 음질을 결정짓는 매우 중요한 요소이다. 그런데 피아노를 제작함에 있어 브릿지를 향판에 부착함으로서 진동 특성이 브릿지 부착 전과 달라지게 된다. 본 연구에서는 브릿지가 부착되지 않은 피아노 향판의 진동 특성을 측정한 후 동일한 항판에 대하여 브릿지를 부착한 상태에서의 진동 특성을 클라드니 패턴을 이용하여 비교, 측정하였다. 두 경우에 대한 비교 측정 결과 저주파에 대해서는 진동 특성이 큰 차이를 보이지 않지만 고주파에 대한 진동 특성은 크게 달라짐을 확인할 수 있었다

• 대한조선학회논문집
• /
• 제44권5호
• /
• pp.488-495
• /
• 2007

In this paper, SBN (Structure-Borne Noise) reduction of resiliently mounted machinery and effect of the foundation impedance on mount performance is studied. SBN reduction through the mount is analyzed by using two theoretical models; mass-spring model and wave model, in which longitudinal wave propagation is included. It is found that floor impedance greatly affects SBN reduction through lower mount, while it is almost negligible to SBN reduction through upper mount. Comparisons between measurement and predictions shows that the mass-spring model is valid only in low frequency range below few hundred Hz, while for high frequency ranges longitudinal wave propagation in the mount must be considered.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2002년도 하계학술발표대회 논문집 제21권 1호
• /
• pp.545-548
• /
• 2002

Inharmonicity가 피아노의 음색에 미치는 영향을 가능한 한 객관적으로 평가하기 위해 본 연구 에서는 inharmonicity는 다르면서 음색에 영향을 미치는 다른 모든 요소들은 같게 합성된 여러 샘플들을 이용해 청취평가를 시행하는 방법을 사용한다. 합성된 피아노 음의 부분음들이 가지는 시간 영역 엔벌로프는 실제 녹음된 피아노 음에서 추출되었으며 인위적으로 조절되는 inharmonicity 의 크기 역시 실제 녹음된 피아노 음에서 얻은 데이터에 근거하였다. 청취평가는 피아노의 음색을 표현한다고 생각되는 적절한 형용사들의 쌍으로 만들어진 질문들로 이루어졌으며 평가를 반복해가며 보다 객관성을 높이기 위한 방법들을 시도하였다. 이러한 과정에서 얻은 결과들을 통해 그 동안 막연히 이해되어오던 inharmonicity와 음색의 관계를 보다 세밀하고 객관적으로 분석할 수 있다.