• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.110-114
• /
• 2012

We studied on the nondestructive evaluation of the elastic wave signal of SiC ceramics and SiC/SiC composite ceramics under monotonic tensile loading. The elastic wave signal of cross and unidirectional SiC/SiC composite ceramics were obtained by pencil lead method and bending test. It was applied for the time-frequency method which used by the discrete wavelet analysis algorithm. The time-frequency analysis provides time variation of each frequency component involved in a waveform, which makes it possible to evaluate the contribution of SiC fiber frequency. The results were compared with the characteristic of frequency group from SiC slurry and fiber. Based on the results, if it is possible to shift up and design as a higher frequency group, we will can make the superior material better than those of exiting SiC/SiC composites.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.11a
• /
• pp.91-95
• /
• 2001

In this study, we estimated the behavior of the diversity of physiological responses under varied physical environmental factors by measuring variations of heart rate variability (HRV), an index of activity of cardiac autonomic control. Seven healthy young male adults consented and participated in the study. The environmental conditions consisted of thermal, lighting, and acoustic conditions. Two components of HRV were measured. one was the low frequency (LF) component of HRV, which provided a quantitative index of the sympathetic and parasympathetic (vagal) activities controlling the heart rate (HR). The other component measured was the high frequency (HF) component, which provided an index of the vagal tone. The percent contribution of physical environmental factors to the variations in HRV indices were calculated by ANOVA. The contribution of physical environmental factors to the variations in HR was higher than the contribution of HF and LF. However, the contribution of these factors was lower than the contribution related with individual difference in all indices. This result showed that the individual diversity of physiological responses is not a negligible quantity.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1580-1582
• /
• 1994

In this study, when AC voltage is applied to block type treeing specimen which is fabricated with polyethylene which dielectric characteristics is excellent, from initial tree to final breakdown, Using acoustic emission method. we take statistically on parameter, which is skewness. We experimented on quenching condition and illustrated skewness locus plane so that studied interrelation of life expectation and parameter.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.71-80
• /
• 2000

In Underwater Flight Vehicle depth control system, the followings must be required. Firstly, It need robust depth control performance which can get over parameter variation, modeling error and disturbance. Secondly, It need no oveshoot phenomenon to avoid colliding with ground surface and obstables. Thirdly, It need continuous control input to reduce the acoustic noise and propulsion energy consumption. Finally, It need effective interpolation method which can reduce the dependency of control parameters on speed. To solve these problems, we propose the Fuzzy-PID depth controller with the control parameter interpolators. Simulation results show the proposed control scheme has robust and accurate performance with continuous control input.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.5
• /
• pp.263-266
• /
• 2006

An optical microphone was developed using a dual-core multi-mode fiber block and a membrane type micromirror. The fiber block serves as a compact optical head, and the micromirror as a reflective diaphragm. The micromirror is designed to be suspended through a silicon bar connected t a frame, allowing for displacement induced by acoustic waves. The optical head is implemented by integrating two multi-mode fibers in a single block, and used to transfer light signals between it and the diaphragm. For the assembled microphone, its static characteristics were observed to reveal the operating point defined as the optimum distance between the optical head and the diaphragm. And its dynamic response was tested to exhibit a frequency bandwidth of 3 kHz with the variation of $\sim5dB$.

• The Korean Journal of Zoology
• /
• v.36 no.4
• /
• pp.476-486
• /
• 1993

From a population in Kang-Nae, Cheong-won, Chung-Buk, acoustic behaviours of Gray-headed Bunting (Emberizo fucata) were obsenred. The singing of males was classified into two major types, stereotyped song and squeaky song. The stereotyped songs of eight territorial males were recorded Intraindividual and individually distinctive features were studied. Individuals produced their song in distinctive ways in terms of song duration and the number of syllables. Gray-headed Buntings sang various syllable types. We found that a male produced more constant syllables in anterior group than those in posterior group. Males sang distinctive syllables among them. Some syllable types which were frequently appeared in an anterior group. In these analyses, we suggest that the anterior groups in songs of a Gray-headed Bunting express the constant information and the posterior groups contribute to situational communication.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06d
• /
• pp.18-24
• /
• 1998

최근의 연구를 통해 해양의 내부파가 음파전달에 영향을 주어 비정상적인 손실을 일으키는 것을 밝혀졌다. 한국 동해세서도 강한 수온약층을 중심으로 내부파가 존재할 것으로 여겨져 왔으며, 이를 규명하고자 '98년 6월 각종 장비를 동원한 해양 관측을 동해항 근해에서 실시하였다. 또한 내부파에 의한 음파의 전파 특성을 추정학자 음원과 수신기를 고정한 상태에서 음향 실험을 실시하였다. 실험 결과 전형적인 내부파는 주기가 약 5-12분이고 최대 진폭은 15m 정도임이 밝혀졌다. 특히 10여개의 내부파 묶음이 약 36cm/sec 의 속도로 이동하고 있음도 확인하였다. 15개의 음향센서로 이뤄진 수직선배열 수신기와 음원을 이용한 음향 실험결과 역시 4-12분 주기에서 부분적으로 스펙트럼이 높게 나타났으며, 특히 주파수 1kHz 인 경우에는 4, 6분 주기에서 15개의 센서에 대해 일관되게 높은 스펙트럼 준위가 나타났다. 내부파에 의한 이러한 음파의 특성은 음파의 모든간 결함으로 나타나는 일종의 간섭 현상으로 설명될 수 있다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1991.10a
• /
• pp.107-112
• /
• 1991

The object of this study is to investigate material characteristics and flexural behavior of high strength concrete. Principal causes of variations of high compressive strength include the strength-producing capabilities of cement and silica hume. Compressive strength of 1200 kgf/$\textrm{cm}^2$ is introduced for identifying the effect of the variation of the size of porocity and alternative method of measurement, Acoustic Emition method, is applied to examine the phenominon of concrete failure. The main test variables in the beam element are tensile steel ratios, presence of shear reinforcement, and change of steel shape. The estimation of stress block in the flexural test of this element tends to support the present theory and may suggest a desirable shape of the stress block.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.322-323
• /
• 2005

We deposited Zinc oxide (ZnO) thin films on Ru buffer layer in order to protect the amorphous layer between ZnO and Al interface. In X-ray diffraction (XRD) pattern, it was observed that increase of (002)-orientation by the variation of annealing treatment temperature. Also, surface roughness and specific resistance were increased by annealing treatment but full width at half maximum (FWHM) was decreased. In film bulk acoustic resonators (FBARs) fabricated from these results, we finally confirmed that the resonant frequency of 0.89 GHz without its shift was measured.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.374-379
• /
• 2013

Helmholtz resonators have high transmission loss in a narrow band at the resonance frequency. The transmission loss characteristics of resonators at high sound pressure levels can change due to variations of the impedance as a result of nonlinear behavior. Different sound pressure levels are applied to each resonator when resonators were arranged along the path. Therefore, impedance variation due to incident sound pressure level should be considered in order to predict the transmission loss.