• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.99-102
• /
• 2001

In this paper, the electronic ballast was developed to control 250W metal halide lamp. To avoid acoustic resonance phenomenon, we calculated the acoustic resonance band and determined the driving frequence to from 70kHz to 100kHz. Due to the switching loss of MOSFET, many problems are caused in the inverter circuit during lighting the lamp, so we have reduced the loss by connecting the capacitor to reduce inrush current In this paper, main research area is to find the methods to operate the Iamp on regulated constant output. After detecting the current I and voltage V of the lamp, we changed the driving frequency by changing the DC voltage level.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.589-593
• /
• 2001

This paper presents a high frequency modulation electronic ballast for the metal halide lamp. As the proposed ballast operates in high frequency ranges (20kHz - 100kHz) and it can start up the lamp using the LC resonant circuit without external igniter, the proposed ballast is very compact. The proposed ballast is controlled with the modulated frequency in the range of 20kHz to 100kHz, and it has variable modulating frequencies between 200Hz and 2kHz in order to avoid the acoustic resonance phenomenon. In this paper, a new realtime acoustic resonance detection method is described and the experimental results with the proto-type ballast of 150W metal halide lamp with the dimming function are discussed.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.208-211
• /
• 2001

This paper presents the considerations of the high frequency modulation method for the metal halide lamp electronic ballast. The acousitc resonance phenomenon is occurred, if the metal halide lamp is driven at constant high frequency. The frequency modulation method therefore, is used to avoid the acoustic resonance phenomenon, but the crest factor of lamp current is increased. In this paper, the driving characteristic of the metal halide lamp according to the waveshape and frequency variations of modulating signal is considered with a viewpoint of crest factor.

• Journal of the Korean Society of Combustion
• /
• v.19 no.1
• /
• pp.29-38
• /
• 2014

This paper described an experimental investigations of combustion instability mode in a lean premixed dual swirl combustor for micro-gasturbine system. When such the instability occurs, a strong coupling between pressure oscillations and unsteady heat release excites a self-sustained acoustic wave which results in a loud, annoyed sound and may also lead a structural damage to the combustion chamber. The detailed period of flame behavior and heat release in combustion instability mode have been examined with high speed OH and CH-PLIF system and $CH^*$ chemiluminescence measurement, flame tomography with operated at 10 kHz and 6 kHz each. Experiment results suggest that unstable flame behavior has a specific frequency with 200 Hz and this frequency is accords with about 1/2 sub-harmonic of combustor resonance frequency, not fundamental frequency. This is very interesting phenomenon that have not reported yet from other previous works. Therefore, when a thermo-acoustic instability with Rayleigh criterion occurs, the fact that the period of heat release and flame behavior are different each other was proposed for the first time through this work.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.288-294
• /
• 2016

The space between tire and wheel guard acts as a path for tire pattern noise transmission. In this study, acoustic phenomenon occurring in the tire-wheel guard space is investigated using acoustic mode analysis and visualization of the sound pressure distribution over the wheel guard surface. We introduced a cavity over the wheel guard surface to reduce the tire pattern noise, where the cavity acts as an acoustic damper. The interior noise was reduced by 2 dB(A), and the noise control measures treated in this study may provide an efficient method to improve interior sound quality without increasing cost and weight at the final stage of the vehicle development.

• Journal of the Korean Society of Visualization
• /
• v.3 no.2
• /
• pp.51-56
• /
• 2005

Acoustic excitations were imposed to coaxial air jet of non-premixed jet flame with hydrogen gaseous injected axially in the center of the flow. The frequencies of excitation were three dominant resonant frequencies at 1L, 2L, 3L. modes including specially 514 Hz (2L-mode) which was estimated theoretically as longitudinal mode of combustor characteristics. The mixing enhancement by acoustic forcing has been investigated quantitatively using PLIF and PIV. The effect of acoustic excitation on combustion process was significant to enhance mixing rate that coincides with specific resonant frequencies. And the behavior of vortex-interaction on flame structure was a good evidence to investigate the phenomenon of shear/mixing layer of fuel-air jet structure. The results obtained in this study concludes that generated streamwise vortex by acoustic excitation has a potential to enhance the mixing rate and abating NOx emissions.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.999-1000
• /
• 2008

150W의 정격을 가지는 150W-CDM, HCI, CMH 세라믹 메탈 할라이드 램프의 음향공명주파수를 계산하여 예측하고 Half-Bridge구조의 Inverter로 각 램프를 점등하여 음향공명이 발생할 경우와 발생하지 않을 경우의 램프 특성을 분석한 결과 음향공명 발생시 30Hz이하의 낮은 주파수의 전류 신호가 포함됨을 확인하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.61-69
• /
• 2016

This study is the results related to the combustion instability phenomenon with respect to combustor length and thermal power as variables in dual swirling combustor configuration. Especially, the beating phenomena having the insensitive resonance frequency of relatively constant peaks are observed when the combustor lengths increase in a lower power regime. This beating phenomenon might be occurred due to the interacting behaviors of pilot and main burners with different periods. Therefore, such insensitive response seems to be a result of the beating phenomenon with interaction between the pilot and main flames even though the combustor lengths are increased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1052-1058
• /
• 2005

This paper dealt with the design and fabrication of a low frequency electronic ballast for ruh attracting lamps. The proposed electronic ballast was composed of a full-wave rectifier, a step don converter operated as a constant power controled current source, an inverter operated by 130 Hz square wave, and an ignition circuit. An acoustic resonance phenomenon of discharge lamps could be eliminated by application of 130 Hz square wave. Also, a circuit of high voltage pulse generation for lamp ignition was added to the ballast. From the experimental results, voltage and current of the lamp operated by the electronic ballast were estimated 132.5 V and 7.6 A, respectively. and the power consumption was about 1,000 W. The weight of the ballast, which is one of important advantages, was reduced to one-fifth of conventional magnetic ballasts.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.871-877
• /
• 2001

Experimental study was conducted to investigate the effects of axial forcing on the flame structures near the nozzle exit of non-premixed flame. The most notable observation is that the direction of vortical motions is changed at some ranges, according to the increase of excitation amplitude. Especially, the elongation flame and the phenomenon of In-burning are always occurred when the vortical motion turnabout. In an analysis of the flame/flow visualization by means of direct photography and RMS technique, a plausible explanation can be made that above phenomena are related only to the amplitude of phase average velocity between the instantaneous velocity elements of excited flow.