Journal of the Korea Institute of Information and Communication Engineering (한국정보통신학회논문지)

The Korea Institute of Information and Commucation Engineering (한국정보통신학회)
권호 표지

Development of a Low frequency Operating Electronic Ballast for Fish Attracting Lamps

저주파 구동형 집어등용 전자식 안정기 개발

  • 길경석 (한국해양대학교 전기전자공학부) ;
  • 김일권 (한국해양대학교 전기전자공학부) ;
  • 송재용 (한국해양대학교 전기전자공학부) ;
  • 한주섭 (한국해양대학교 전기전자공학부) ;
  • 신광철 (한국해양대학교 전기전자공학부)
  • Published : 2005.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper dealt with the design and fabrication of a low frequency electronic ballast for ruh attracting lamps. The proposed electronic ballast was composed of a full-wave rectifier, a step don converter operated as a constant power controled current source, an inverter operated by 130 Hz square wave, and an ignition circuit. An acoustic resonance phenomenon of discharge lamps could be eliminated by application of 130 Hz square wave. Also, a circuit of high voltage pulse generation for lamp ignition was added to the ballast. From the experimental results, voltage and current of the lamp operated by the electronic ballast were estimated 132.5 V and 7.6 A, respectively. and the power consumption was about 1,000 W. The weight of the ballast, which is one of important advantages, was reduced to one-fifth of conventional magnetic ballasts.

본 논문은 저주파 구동형 집어등용 전자식 안정기의 설계 및 제작에 관하여 기술하였다. 제.안한 안정기는 전파 정류회로, 정전력형 전류원으로 동작하는 강압형 컨버터와 130Hz 구형파 발진의 인버터 및 재점등 보호회로로 구성하였다. 램프의 음향공명현상은 130Hz의 저주파 구형 펄스로 제거할 수 있었으며, 램프의 재점등을 위한 고전압 펄스 발생회로를 부가하였다. 실험결과로부터 본 안정기에 의해 구동되는 램프 전압과 전류는 각각 132.5V, 7.6A, 소비전력은 약 1,000 W이었다. 전자식 안정기의 가장 큰 이점으로 중량은 동일 용량의 자기식 안정기에 비해 약 1/5로 감소하였다.

Keywords

References

  1. H. Guldner, 'Principles of Electronic Ballast for Fluorescent Lamps - An Overview', Pro. of the IEEE Power Electronics Specialists Conference, Vol. 1, pp. 19-25, 1999
  2. T. J. Liang, 'High Frequency Electrical Circuit Model of Metal-Halide Lamp', Pro. of the IEEE Power Electronics Conference and Exposition, Vol. 2, pp. 1163-1167, 1998
  3. Reatti A, 'Low-cost high power-density electronic ballast for automotive HID lamp', IEEE Trans. on Power Electronics, Vol. 15, No.2, pp. 361-368, 2000 https://doi.org/10.1109/63.838109
  4. Benyaakov S, 'Design and Performance of An Electronic Ballast for High-Pressure Sodium (HPS) Lamps', IEEE Trans. on Industrial Electronics, Vol. 44, No.4, pp. 486-491, 1997 https://doi.org/10.1109/41.605623
  5. Kalser W, 'Hybrid Electronic Ballast Operating The HPS Lamp At Constant Power', IEEE Trans. on Industry Applications, Vol. 34, No.2, pp. 319-324, 1998 https://doi.org/10.1109/28.663474
  6. 김기정, 박종연, '메탈할라이드 방전관 내의 음향 공명을 감소시킨 전자식 안정기 설계', 전력전자학회 논문지, 제4권, 제5호, pp. 405-412, 1999
  7. Ichirou Oota, 'A High Efficiency Power Control Circuit for Metal Halide Lamp', Pro. of the IEEE Power Electronics Conference and Exposition, Vol. 2, pp. 1168-1173, 1998
  8. J. M. Alonso, 'A Comparison of LCC and LC Filters for its Application in Electronic Ballast for Metal-Halide Lamps', Pro. of the IEEE Power Electroincs Spectialists Conference, Vol. 1, pp. 114-119, 2001
  9. Christian Branas, 'Electronic Ballast for 250W HPS Lamps Based on LCC Resonant Inverter with Soft Start-up and Quasi-Optimum Control', Pro. of the IEEE International Symposium on Industrial Electronics, Vol. 2, pp. 768-773, 1999
  10. H. Kakehashi, 'HID-Lamp Igniter Using A Two-Stage Magnetic-Pulse-Compression Circuit', Pro. of the IEEE Power Electronics Conference and Exposition, Vol. 2, pp. 1174-1178, 1998