• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.885-891
• /
• 2003

Effects of each acoustic property on absorption characteristics of polyester fiber materials has been studied in this paper. It would be impossible for us to measure effects of each acoustic property by experimental method since we cannot make sound-absorbing materials in which only one of the properties is changed. We have adopted a numerical prediction method to carry out parameter studies for each acoustic property. And to get a general behavior of acoustic performance of the materials, the numerical simulation has been repeated to several cases of different bulk density. Finally we have obtained frequency-dependent control factors in the absorption performance which gives us design capability of acoustic absorbing materials.

• 산업기술연구
• /
• 제22권A호
• /
• pp.43-48
• /
• 2002

Acoustic modes of a vehicle compartment dominate the noise characteristics of the vehicle system in the low frequency range. Vehicle compartments have head liner and air gap of proper thickness to mount a interior lamp, as well as to have a good sound insulation and absorption performance. This study estimates the acoustic modal property of the medium size passenger car by experiment and by finite element analysis and also, investigates the effect of the head liner on the acoustic mode of the passenger compartment to obtain useful information for low noise compartment design.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.1048-1054
• /
• 2004

The Passive acoustic control is used in various fields, such as structures, automobiles, aircraft and so on. It is used in variety of acoustic field with the absorbing material, as one of the methods which can control the acoustic in optional space. In that case of passive control using this absorption material, it would be important to maximize the control performance of material property, numbers, geometry shape and the attached location of boundary area of the absorbing material. But realistically these variables, specially material Property, have no broad choice. Therefore, the position of absorbing material is the most important variable. In this study, we use the optimization method to minimize acoustic energy of optional space in the interest frequency attaching some absorbing materials to the boundary area. For analysis and optimization, this study uses the FEA and the conjugate gradient method. This optimization process is very efficient and useful in the passive acoustic control.

• Journal of the Korean Wood Science and Technology
• /
• 제34권2호
• /
• pp.58-67
• /
• 2006

The relationship between acoustic property and coating hardness of musical instruments was investigated using a sound level meter and a pendulum hardness tester. Urethane topcoat, oil stain, natural oil varnish, and UV-curable epoxy acrylate coatings were applied on four different substrates: Paulownia coreana, Pinus koraiensis, Castanea crenata var. dulcis and Pinus densiflora. The influence of the coating type on the acoustic properties was stronger than that of the substrate. In the case of an oil stain formed with tacky coating layer, the sound pressure level (SPL) and surface hardness decreased with increasing of coating thickness. In the other coatings, SPL decreased and hardness increased as the coating layer thickened. However, SPL began to increase again at coating thickness above $100{\mu}m$.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2002년도 하계학술발표대회 논문집 제21권 1호
• /
• pp.377-380
• /
• 2002

Acoustic Characteristics of Nitrile Butadiene Rubber with Carbon Black ContentAcoustic and mechanical properties of Nitrile Butadiene Rubbers (NBR) with the variation of the carbon black content were investigated. NBR where the acrylonitrile content is $33\%$ based on the mole percent has been prepared with fixed sulfur content for vulcanization. Acoustic measurement of the prepared rubbers were peformed in the frequency region of $300\;\~\;1000\;kHz$. Their mechanical properties such as density, hardness were also measured. Increase of the carbon black content in the rubber resulted in enhancement of the mechanical property and linear increase of the sound speed as function of the carbon black content. Interestingly, attenuation of the sound speed was only affected by the existence of the carbon black and not by the amount of carbon black in the experiment range of this article. In this study, it was found that the amount of carbon black content in the NBR was correlated with the acoustic properties and can be estimated nondestructively by the measurement of the specific acoustic property.

• 한국음향학회지
• /
• 제25권3호
• /
• pp.101-106
• /
• 2006

본 연구에서는 그릴에 뚫려 있는 구멍이 마이크로스피커의 전체 임피던스에 미치는 영향에 대하여 조사하였다 이들에 대한 영향을 이론적으로 접근하기 위하여 그릴의 구멍을 열린 짧은 길이를 갖는 파이프시스템의 일종인 올피스로 취급하였다. 이에 대한 결과는 실험적으로 얻어진 특성과 매우 잘 일치하였다. 다시 말하면, 이들의 구멍크기가 작아지게 되면 구멍에 의한 음향임피던스가 매우 커지게 된다. 그 결과로써, 마이크로스피커의 전체 음향임피던스에 미치는 영향이 커지는 것을 알 수 있었다. 이처럼 그릴의 구멍크기가 작을수록 전체 임피던스에 미치는 영향이 커져서 마이크로 스피커 유닛에서 발생한 음향특성이 그릴의 사용으로 인하여 달라질 수 있게 된다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.1-12
• /
• 2008

주요 국산재의 여러 가지 응용물성을 지난 3년에 걸쳐 조사하였다. 전보(강 외 4인 2008, 변 외 5인 2008)에 이어 본보에서는 우리나라의 활엽수 주요 수종인 백합나무, 거제수나무, 오동나무를 재료로 사용하였다. 매년 동일한 장치와 실험조건으로 실험하였기 때문에 모든 수종에 대한 결과를 상호 비교 할 수 있었다. 수분흡착성 실험은 80메시 목분을 이용하였으며, 넓은 범위의 상대습도조건에 따른 평형 함수율과 흡착등온선을 구하였다. 열전도율과 열확산률은 열선열전도장치를, 전기의 부피저항률과 저 항은 고전기저항계를 이용하여 측정하였다. 정목재와 판목재의 열적 전기적 특성차이가 관찰되었는데 이는 해부학적 차이에 의한 것으로 보인다. 음향적 성질은 음향측정시스템을 사용하여 동적탄성률, 내부마찰을 측정하였다. 본 논문의 결과들은 목재구조물 설계, 휴대용 목재수분계 보정, 음향적 성질 등에 필요한 기본 자료를 제공한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.70-70
• /
• 2007

• 대한의용생체공학회:의공학회지
• /
• 제36권1호
• /
• pp.7-15
• /
• 2015

The egg white phantom is a thermal lesion visualization phantom able to illustrate a thermal lesion. It is often used to evaluate the performance of HIFU and is less expensive than the BSA phantom. This study determined the optimal phantom composition for evaluated therapeutic ultrasound machines by varying the egg white concentration in the egg white phantom and demonstrated its utility as a therapeutic ultrasound phantom. The egg white phantom at varying egg white concentrations (10-40% in 10% intervals) was fabricated, and its thermal properties and acoustic properties were assessed. In addition, the size and shape of the formed lesion were compared between the egg white phantom and bovine liver tissue according to the electrical power. The results showed that 30% egg white phantom was optimal for the performance evaluation due to its thermal and acoustic properties. The generated thermal lesions formed sequentially as a cigar, ellipse, tadpole, and cone shapes according to the electrical power; a similar tendency was observed in the liver tissue. Hence, we conclude that the egg white phantom will prove useful in quantitatively evaluating the thermal effects of therapeutic ultrasound.

• 한국음향학회지
• /
• 제19권3호
• /
• pp.77-85
• /
• 2000

사질퇴적물의 함량이 높은 대한해협 퇴적물에 대해 새로운 음파전달속도 측정 장비(sediment sound velocimeter)를 이용 음파전달속도와 물리적 성질을 측정하여, 연구지역의 지음향 및 물리적 특성을 제시하였다. 연구지역 퇴적물의 물성 및 음파전달속도 변화는 조직의 변화에 의해 크게 좌우되는 것으로 나타났다. 연구결과 음향 및 물성 값을 바탕으로 연구지역을 3개 지역(provinces; mid-shelf, shelf margin and trough)으로 구분할 수 있었으며, 이러한 결과는 탄성파 단면 분석을 통해 시스템 트랙과 퇴적계로 지역구분한 기존의 결과[14]와 잘 일치한다. 연구를 통해 새롭게 제시된 3개 지역의 지음향모델은 Briggs and Fischer[5]가 제시한 기존의 대한해협 지 음향모델의 수정모델로 제시한다.