• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.6
• /
• pp.533-541
• /
• 2020

This study using ABAQUS investigates the nonlinear vibration responses when thermal and random acoustic loads are applied simultaneously to the stiffened composite panels. The nonlinear vibration analyses are performed with changing the number of stiffeners, and layup condition of the skin panel. The panel and stiffeners both are modeled using shell elements. Thermal load (ΔT) is assumed to have the temperature gradient through the thickness direction of the stiffened composite panel. The random acoustic load is represented as stationary white-Gaussian random pressure with zero mean and uniform magnitude over the panels. The thermal postbuckling analysis is conducted using RIKS method, and the nonlinear dynamic analysis is performed using Hilber-HughesTaylor time integration method. When ΔT = 25.18 ℃ and SPL = 105 dB are applied to the stiffened composite panel, the effect of the number of stiffener is investigated, and the snap-through responses are observed for composite panels without stiffeners and with 1 and 3 stiffeners. For investigation of the effect of layup condition of the skin panel, when ΔT = 38.53 ℃ and SPL = 110 dB are applied to the stiffened composite panel, the snap-through responses are shown when the fiber angle of the skin panel is 0°, 30°, and 60°.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.2
• /
• pp.234-242
• /
• 2017

This study investigates vibro-acoustic characteristics of a short, thick cylinder containing a slot given a pined-free boundaries. Using the finite element analysis results, structural modes of the asymmetric cylinder (with a slot) are expressed as the linear combinations of modes of the symmetric cylinder made of same material with identical geometry except the slot. Based on synthesized modal vibrations, acoustic modes of the asymmetric cylinder are obtained with two approaches, i.e., Rayleigh integral calculation and modal expansion of the acoustic modes of the symmetric cylinder. Also, acoustic powers, max. sound pressure and directivity pattern are obtained from acoustic modes and verified with the boundary element analyses. Based on these results, the accuracy of proposed approaches in calculating the vibro-acoustic properties of a short, thick, asymmetric cylinder has been confirmed. The procedure can be applied to the similar cylinders with other boundaries or asymmetric properties. Also, attenuation of vibration and/or sound radiation of the cylinder type practical components can be studied using these approaches.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.191-192
• /
• 2002

The scuffing failure is a critical problem in modern machine components, especially for the requirement of high efficiency and small size. In this study. scuffing experiments are conducted using Acoustic Emission(AE) measurement by an indirect sensing approach to detect scuffing failure. Using AE signals we con get and indication about the state of the friction processes, about the quality of solid and liquid layers on the contacting surface in real time. The FFT(Fast Fourier Transform)analyses of the AE signal are used to understand the interfacial interaction and the relationship between the AE signal and the state of contact is presented.

• Structural Engineering and Mechanics
• /
• v.67 no.5
• /
• pp.545-553
• /
• 2018

Mode II delamination propagation is an important damage mode in laminated composites and this paper aims to investigate the behavior of this damage in laminated composite materials using acoustic emission (AE) technique. Three different lay-ups of glass/epoxy composites were subjected to mode II delamination propagation and generated AE signals were recorded. In order to investigate the propagation of delamination behavior of these specimens, AE signals were analyzed using Wavelet Packet Transforms (WPT) and Fast Fourier Transform (FFT). In addition, conventional AE analyses were used to enhance understanding of the propagation of delamination damage. The results indicate that different fracture mechanisms were the main cause of the AE signals. The dominant mechanisms in all the specimens were matrix cracking, fiber/matrix debonding and fiber breakage, with varying percentage of the damage mechanisms for each lay-up. Scanning Electron Microscopy (SEM) observations were in accordance to the AE results.

• Proceedings of the KSPS conference
• /
• 2006.11a
• /
• pp.31-36
• /
• 2006

Research in the Center for Pediatric Auditory and Speech Sciences (CPASS) is attempting to characterize or phenotype children with speech delays based on acoustic-phonetic evidence and relate those phenotypes to chromosome loci believed to be related to language and speech. To achieve this goal we have adopted a highly interdisciplinary approach that merges fields as diverse as automatic speech recognition, human genetics, neuroscience, epidemiology, and speech-language pathology. In this presentation I will trace the background of this project, and the rationale for our approach. Analyses based on a large amount of speech recorded from 18 children with speech delays will be presented to illustrate the approach we will be taking to characterize the acoustic phonetic properties of disordered speech in young children. The ultimate goal of our work is to develop non-invasive and objective measures of speech development that can be used to better identify which children with apparent speech delays are most in need of, or would receive the most benefit from the delivery of therapeutic services.

• Journal of Welding and Joining
• /
• v.20 no.1
• /
• pp.26-33
• /
• 2002

This study was undertaken to obtain the fundamental knowledges on the weld deflects and it's realtime monitoring method. The paper describes the results of high speed photography, acoustic emission (AE) detection and plasma light emission (LE) measurements during $CO_2$ laser welding of STS 304 stainless steel and A5083 aluminum alloy in different welding condition. The characteristic frequencies of plasma and keyhole fluctuations at different welding speed and shield gases were measured and compared with the results of Fourier analyses of temporal AE and LE spectra, and they had considerably good agreement with keyhole and plasma fluctuation. Namely, the low frequency peaks of AE and LE shifted to higher frequency range with the welding speed increase, and leer the argon shield gas it was higher than that in helium and nitrogen gases. The low frequencies dominating in fluctuation spectra of LE probably reflect keyhole opening instability. It is possible to monitor the weld bead deflects by analyzing the acoustic and/or plasma light emission signals.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.05a
• /
• pp.34-39
• /
• 2002

The surfaces of machine components in sliding contact such as bearing, gears and pistons etc. frequently operate under the condition of mixed lubrication due to high load, high speed and slip. These machine components often undergo the inception of scuffing in practical application. The scuffing failure is a critical problem in modern machine components, especially for the requirement of high efficiency and small size. However, it is difficult to find a universal mechanism to explain all scuffing phenomena because there are so many factors affecting the onset of scuffing. In this study, scuffing experiments are conducted using Acoustic Emission(AE) measurement by an indirect sensing approach to detect scuffing failure. Acoustic Emission(AE) signal has been widely utilized to monitor the interaction at the friction interface. Using AE signals we can get an indication about the state of the friction processes, about the quality of solid and liquid layers eon the contacting surfaces in real time. The FFT(Fast Fourier Transform)analyses of the AE signal are used to understand the interfacial interaction and the relationship between the AE signal and the state of contact is presented

• Phonetics and Speech Sciences
• /
• v.5 no.4
• /
• pp.71-78
• /
• 2013

The purpose of this study was to compare the acoustic voice outcomes of children with cochlear implant to those of children with normal hearing. Participants were 41 children using unilateral cochlear implant (18 males and 23 females), and children with normal hearing from the same age and sex. Mean age of implantation was approximately 3 years old, mean duration of implant use was 4 years in CI group. Acoustic analyses were performed using MDVP of CSL. Speech samples were 3 sustained vowels, /a, i, u/. 9 parameters (F0, Fhi, Flo, Jitter, Shimmer, vF0, vAm, NHR, and SPI) were analyzed. Children with CI did not show the significant differences in those parameters after the vowel /a/ phonation. Meanwhile, there were significantly different results in F0, Fhi, vF0, and SPI after /i, u/ phonation. These results revealed that differences of voice characteristics in children with CI compare to children with NH persist regarding vowel context. It suggests that high vowels would recommend as speech samples for acoustic evaluation. Futhermore perceptual analysis and speech therapy for phonation control would be necessary for children with CI.

• Tribology and Lubricants
• /
• v.18 no.5
• /
• pp.351-356
• /
• 2002

The surfaces of machine components in sliding contact such as bearing, gears and pistons etc. frequently operate under the condition of mixed lubrication due to high load, high speed and slip. These machine components often undergo the inception of scuffing in practical application. The scuffing failure is a critical problem in modern machine components, especially for the requirement of high efficiency and small size. However, it is difficult to find a universal mechanism to explain all scuffing phenomena because there are so many factors affecting the onset of scuffing. In this study, scuffing experiments are conducted using Acoustic Emission(AE) measurement by an indirect sensing approach to detect scuffing failure. Acoustic Emission(AE) signal has been widely utilized to monitor the interaction at the friction interface. Using AE signals we can get an indication about the state of the friction processes, about the quality of solid and liquid layers on the contacting surfaces in real time. The FFT(Fast Fourier Transform) analyses of the AE signal are sued to understand the interfacial interaction and the relationship between the AE signal and the state of contact is presented.

• Phonetics and Speech Sciences
• /
• v.13 no.3
• /
• pp.21-29
• /
• 2021

The present study investigated how one's cognitive resources are related to speech perception by examining Korean speakers' executive function (EF) capacity and its association with voice onset time (VOT) and f0 sensitivity in identifying Korean stop laryngeal categories (/t'/ vs. /t/ vs. /t^h/). Previously, Kong et al. (under revision) reported that Korean listeners (N = 154) in Seoul and Changwon (Gyeongsang) showed differential group patterns in dialect-specific cue weightings across educational institutions (college, high school, and elementary school). We follow up this study by further relating their EF control (working memory, mental flexibility, and inhibition) to their speech perception patterns to examine whether better cognitive ability would control attention to multiple acoustic dimensions. Partial correlation analyses revealed that better EFs in Korean listeners were associated with greater sensitivity to available acoustic details and with greater suppression of irrelevant acoustic information across subgroups, although only a small set of EF components turned out to be relevant. Unlike Seoul participants, Gyeongsang listeners' f0 use was not correlated with any EF task scores, reflecting dialect-specific cue primacy using f0 as a secondary cue. The findings confirm the link between speech perception and general cognitive ability, providing experimental evidence from Korean listeners.