• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1628-1632
• /
• 2010

Porous ${\eta}-Al_2O_3$ was synthesized by modified sol-gel method using ionic liquid as a templating material. The addition of ionic liquid assisted to increase the surface area of alumina. However, the acidity of aluminas prepared with ionic liquids was hardly affected regardless the change of its structural properties. Among the ionic liquids used in this study, 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][$PF_6$]) was the most effective ionic liquid to produce porous ${\eta}-Al_2O_3$ particles. The catalytic performance of these aluminas has been investigated in dehydration of methanol to produce dimethyl ether. The alumina prepared with [Bmim][$PF_6$] outperformed the other aluminas except ${\eta}-Al_2O_3$ without modification in this reaction.

• Carbon letters
• /
• 제8권2호
• /
• pp.108-114
• /
• 2007

In this work, activated carbon (AC) after $HNO_3$ modification was used as the support during the production of supported $TiO_2$ to increase the high deposition efficiency and the photocatalytic activity. The results of $N_2$ adsorption showed that the BET surface area of samples decreased with an increasing of the concentration of $HNO_3$ due to the penetration of $TiO_2$. From XRD data, a single crystal structure of anatase peak was observed in diffraction patterns for the AC coated with titanium complexes. From the SEM results, almost all particles were aggregated with each other at the carbon surface and AC was covered with $TiO_2$ particles in all of the samples. The EDX spectra show the presence of C, O, Ti and other elements. It was also observed a decreasing of amount of C content with increasing Ti and O content from the EDX. The results of FT-IR revealed that the modified AC contained more surface oxygen bearing groups than that of the original AC. The effect of surface acidity and basity calculated from Boehm titration method was also evaluated from correlations as a function of NaOH, $NaHCO_3$, and $Na_2CO_3$ uptake. The surface modification of AC by $HNO_3$ leads to an increase in the catalytic efficiency of AC/$TiO_2$ catalysts, and the catalytic efficiency increases with increasing of $HNO_3$ concentration.

• 한국연초학회지
• /
• 제31권1호
• /
• pp.9-17
• /
• 2009

Activated carbon fiber (ACF) was surface modified by nitric acid to improve the adsorption efficiency of the propylamine. Functional groups and textural properties of modified ACF were investigated. The total surface acidity increased about 7 times to that of as-received ACF by modification with 1 M nitric acid solution, carboxylic and phenolic groups mainly increased. However, the specific surface areas and the total pore volumes of the modified ACFs were decreased by 5-8% due to the increased blocking (or demolition) of micropores in the presence of newly introduced complexes. Despite the decrease of textural properties, it was found that the amount of propylamine adsorbed by the modified ACFs was increased by approximately 17%. The oxygen and nitrogen contents on the modified ACF increased by 1.5 and 3 times compared with the as-received ACF. From the XPS results, it was observed that propylamine reacted with strong or weak acidic groups, such as -COOH or -OH on the ACF surfaces, resulting in the formation of pyrrolic-, pyridonic- or pyridine-like structures.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3679-3683
• /
• 2010

Niobium oxide ($Nb_2O_5$) and phosphated $Nb_2O_5$ were synthesized and used as catalysts for sorbitol dehydration to isosorbide. The characterization results of $N_2$ adsorption, XRD and $NH_3$-TPD revealed that the phosphoric acid modification could well prevent the crystallization of $Nb_2O_5$. And the amorphous phosphated $Nb_2O_5$ catalysts kept the relatively large surface area and stable acidity at high calcination temperature. The catalytic results showed that the selectivity to isosorbide could be dramatically enhanced over phosphated $Nb_2O_5$. The excellent catalytic performance with 100.0% sorbitol conversion and 62.5% isosorbide selectivity were obtained over the 0.8P/NBO-400 catalyst. Comparing with $Nb_2O_5$ catalysts, phosphated $Nb_2O_5$ catalysts regenerated through a simple calcination process showed no significant activity loss after recycling three runs.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1623-1634
• /
• 2022

A new irradiation loop design has been developed, which provides the ability to carry out radiolytic resistance studies of extraction systems simulating process relevant conditions in an easy and simple way. The step-by-step loop configuration permits an easy modification of settings and has a relative low volume requirement. This irradiation loop has been initially set up to test the main EURO-GANEX process steps: the lanthanide (Ln) and actinide (An) co-extraction followed by the transuranic (TRU) stripping. The performance and changes in the composition have been analyzed during the irradiation experiment by different techniques: gamma spectroscopy and ICP-MS for the extraction and corrosion behavior of the full system, and HPLC-MS and Raman spectroscopy to determine the degradation of the organic and aqueous solvents, respectively. The Ln and An co-extraction step and the corrosion that occurred during the first irradiation step revealed the favorable expected results according to literature. The effects of acidity changes occurred during the irradiation process, the presence of stainless corrosion products in solution as well as the new possible degradation compounds have been explored in the An stripping step. The results obtained demonstrate the importance of developing realistic irradiation experiments where different factors affecting the performance can be easily studied and isolated.

• 아시안잔디학회지
• /
• 제16권1호
• /
• pp.11-18
• /
• 2002

실제 골프장 토양환경에서 비료종류에 따른 계절별.토심별 토양 pH 변화를 규명하고자 안양 베네스트 골프클럽 내 들잔디 '중지'(Zoysta japonica Steud.)로 조성된 포장에서 산도 교정용으로 많이 이용하는 규산질비료(SiO$_2$) 및 석회석(CaCO$_3$) 2종류를 사용하여 규산질 비료 3수준, 석회석 비료 3수준으로 처리하여 실험한 결과 토층별로 현저한 차이가 관찰되었는데 전체 pH 평균을 보면 0~5cm의 표토가 6.54, 5~10cm가 5.80, 10~15cm의 심토에서는 5.04로 나타났다. 비료종류별 처리효과는 3개의 모든 층에서 1% 유의수준에서 고도의 유의성이 있는 것으로 나타났다. 표토인 0~5cm층에서 규산질 비료는 모두 유의한 증가를 보이지 않은 반면 석회질 비료구가 50kg/10a, 100kg/10a에서 유의적으로 증가하였으나 10~15cm 층에서는 규산질 비료 시비구가 100kg/10a, 200kg/10a에서 효과가 있었으나 석회질 비료는 유의한 증가가 인정되지 않았다. 그러나 5~10cm 층에서는 두 가지 비종 모두 유의한 증가를 나타내어 토심에 따른 차이가 있음을 알 수 있었다. 그리고 계절에 따른 경시적 토양산도 차이가 인정되고 이는 토심별로 차이가 인정되므로 토양 샘플 채취시 샘플시기를 고려해야 함을 알 수 있었다. 특히 표토(0~5cm)층의 토양산도가 지하층인(5~10cm, 10~15cm)에서보다 높은 것은 토양산도가 규소나 석회 같은 비료 함량에 의해서만 결정되는 것이 아니고 토양 모암의 상태나 유기물 함량, 강수량 등의 수분 함량, 온도, 토양의 통기성이나 호흡 등H$^{+}$ 이온농도에 영향을 미치는 제반여건이 영향을 미치는 것으로 이를 종합적으로 활용하여 토양산도를 조정해야 함을 알 수 있다.

• 한국대기환경학회지
• /
• 제12권3호
• /
• pp.289-296
• /
• 1996

Effects of crustal species on the characteristics of ambient particles were studied by applying a gas-particle equilibrium model, SCAPE, to the measurements at Kosan, Cheju Island during the spring and summer, 1994. Two cases were simulated; the measured composition was used without any modification (case 1), and the metal ion concentrations originated from crust were subtracted from the measured particle composition (case 2). Total suspended particles (TSPs) were collected by an automatic high volume tape sampler during spring period and by high volume samplers during summer period. The fine particles, PM 2.5, and gaseous volatile species were collected using a filter pack smapler during summer period. The water soluble ion concentrations were analyzed from all the particle samples. According to the simulation results, the effect of crustal elements on the chemical composition of particles is negligible for both TSP particles and PM 2.5 particles. Acidity of particles measured at Kosan, however, is affected by the change of the concentrations of crustal species, stronger effects for TSP particles than for PM 2.5 particles during summer, and stronger effects during summer than spring for TSP particle. The average pH decrease due to the absence of crustal species was about 0.10 for PM 2.5 particle during summer and 1.51 and 0.85 for TSP particles during summer spring, respectively. Water contents of PM 2.5 particles for both cases are comparable to each other. Estimated water content of TSP particles for case 2 is higher than that for case 1 by about 4 $\sim 6 \mum/m^3$ because salts of metal ions are not hygroscopic.

• Preventive Nutrition and Food Science
• /
• 제9권2호
• /
• pp.113-120
• /
• 2004

Selected microbiological and biochemical characteristics of the steeping process for the production of yukwa, a traditional Korean oil-puffed snack made of waxy rice, were investigated during steeping of waxy rice in water for 15 days. The lengthy steeping process was largely predominated by lactic acid bacteria (LAB), particularly, Lactobacillus and Leuconostoc. The predominat type of bacterium isolated was the Y26 strain tentatively identified as Lactobacillus plantarum. The titratable acidity of the steeping medium increased from 0.01 to 1.13%, in parallel with the decrease in pH ranging from 6.3 to 4.2 as the steeping period increased from 0 to 15 days. A high amount of lactic acid and to a much lesser extent, butyric acid, acetic acid, propionic acid, and succinic acid were detected during the steeping process. The amount of reducing sugars in the steeping medium increased from 0.61 to 10.43 mg/mL, whereas sucrose decreased from 0.46 mg% to an undetectable level. Starch degradation products including glucose, maltose and oligosaccharides ranging G3-G7 were not initially noticed, but their content increased during the steeping process until completion. However, no oligosaccharides larger than G8 were detected in the steeping medium. The activities of $\alpha$-amylase, $\beta$-amylase and protease in the steeping medium of waxy rice tended to rise increase with time during the steeping process. From these results, the lengthy steeping process in yukwa production can be characterized as the spontaneous fermentation, dominated by lactic acid bacteria, which is a necessary process for inducing biochemical modification of waxy rice.