• 제목/요약/키워드: acidic paper

검색결과 141건 처리시간 0.02초

밀랍지의 열화 거동 (제2보) - 산 및 알칼리에 의한 밀랍지의 열화 - (Aging Behavior of Beeswaxed Hanji(II) - Acidic and Alkaline Aging of Beeswaxed Hanji -)

  • 김강재;이민형;엄태진
    • 펄프종이기술
    • /
    • 제43권3호
    • /
    • pp.66-72
    • /
    • 2011
  • The annals of Joseon Dynasty is one of UNESCO's Memory of the World Register. For the safety preservation of the waxed annals of Joseon Dynasty, the acidic and alkaline aging mechanism of beeswax and beeswaxed Hanji has been investigated. The weight loss of beeswaxed Hanji by the acidic aging was higher than those of alkaline beeswax. The acid value and relative intensity of carbonyl groups in beeswax were slowly increased with aging time. The strength of dewaxed Hanji was decreased with aging time. The significant changes of crystallinity of dewaxed Hanji by acidic and alkaline aging were not observed.

왕겨초액 처리지의 항균 특성 (Antimicrobial Properties of Paper Treated with Acidic Liquid from Carbonized Rice Hull)

  • 민춘기;조중연;신준섭;이세은
    • 펄프종이기술
    • /
    • 제43권2호
    • /
    • pp.72-76
    • /
    • 2011
  • Antimicrobial activities of the Acidic Liquid originated from Carbonized Rice Hull(ALCRH) and the paper treated with ALCRH were investigated to apply ALCRH to functional paper products as a natural antimicrobial agent. ALCRH showed antimicrobial activity for bacteria and yeast, with higher performance for bacteria than for yeast. Antimicrobial activity was not developed on paper coated with ALCRH by bar coater probably due to the evaporation of antimicrobial compounds of ALCRH from the paper surface with time. Saturation of paper with ALCRH was essential to develop antimicrobial activity on the paper. Dipping paper in ALCRH solution was recommended as one of the effective ways to make antimicrobial paper.

크롬도금의 부식-마멸에 미치는 산성환경의 영향 (The Effect of Acidic Environments on the Corrosion-Wear of Cr Plating)

  • 곽남인;임우조
    • Tribology and Lubricants
    • /
    • 제19권4호
    • /
    • pp.211-216
    • /
    • 2003
  • This paper was studied on the corrosion and corrosion-wear behavior of chromium (Cr) plating in the acidic environments. In the various pH of acidic solutions, the electrochemical polarization test and wear-corrosion test of Cr plating were carried out. And thus potential, corrosion current density and corrosion-wear loss behaviour of Cr plating are investigated.

왕겨초액을 처리한 계란포장용 펄프몰드의 저장성 유지 효능 분석 (The Effect of Acidic Liquid from Carbonized Rice Hull Treatments to Molded Fiber Packages on the Shelf Life of Egg)

  • 민춘기;조중연;신준섭;이세은;전기홍
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2011년도 추계학술발표회 논문집
    • /
    • pp.335-343
    • /
    • 2011
  • We examined the effect of the acidic liquid from carbonized rice hull(ALCRH) treatments to molded fiber packages(MFP) on weight, Haugh unit, pH and microbial activity of egg to extend the shelf life in egg packaging. Higher concentration and surface spray treatment of the acidic liquid extended the shelf life of egg. ALCRH treatment to MFP improved the performance of the packaging for egg in terms of decreased weight loss and retarded microorganism growth of eggs during storage.

  • PDF

목질계 셀룰로오스 에탄올 생산공정에서 전처리과정의 설계 (Design of Pretreatment Process in Cellulosic Ethanol Production)

  • 김형진;이승범
    • 공업화학
    • /
    • 제26권4호
    • /
    • pp.511-514
    • /
    • 2015
  • 차세대 바이오에탄올로 주목받고 있는 목질계 바이오매스를 이용한 셀룰로오스 에탄올 생산과정은 셀룰로오스를 단당류로 분해하는 전처리과정이 가장 중요한 역할을 한다. 본 연구에서는 산가수분해와 효소당화과정을 이용하여 볏짚, 톱밥, 복사지, 신문지 등과 같은 목질계 바이오매스로부터 셀룰로오스에탄올을 제조하였다. 전처리과정으로 10~30 wt% 황산을 이용한 산가수분해($100^{\circ}C$, 1 h), celluclast ($55^{\circ}C$, pH = 5.0), AMG ($60^{\circ}C$, pH = 4.5), spirizyme ($60^{\circ}C$, pH = 4.2)을 이용한 효소당화과정(30 min), 산가수분해 후 효소당화과정을 비교하였다. 전처리과정의 수율은 hybrid 과정 > 산가수분해 > 효소당화 순으로 셀룰로오스 에탄올로의 전환이 잘 이루어지는 것으로 나타났으며, 최적 발효시간은 2일이었다. 또한 20 wt% 황산을 이용한 산가수분해 후 celluclast를 이용하여 효소당화를 수행할 경우 톱밥 > 볏짚 > 복사지 > 신문지 순으로 셀룰로오스 에탄올 전환특성이 높게 나타났다.

Observations of Boring Behaviour and the Drilling Mechanism of Lunatia fortunei (Gastropoda: Naticidae) in Western Korea

  • Chung, Ee-Yung;Kim, Sung-Han;Back, Yong-Hae
    • 한국패류학회지
    • /
    • 제27권3호
    • /
    • pp.253-259
    • /
    • 2011
  • Boring behaviour and drilling mechanism were investigated by visual observations. In this study, of two kinds of holes (the outer and inner holes) which are formed by drilling of boring gastropod Lunatia fortunei (Naticidae), the diameters of the outer holes are broader and larger than those of the inner holes, and their holes look like the crater in shape, as seen in all valves of bivalves bored by Naticidae species. Two kinds of glands (the accessory boring gland and accessory salivary gland) on the foots of boring gastropods have been investigated. Of them, it has been confirmed that only the accessory salivary glands on the foots secreted sulphuric (acidic) components in the mucus (secretion), while the accessory boring glands on the foots did not secrete their components. In this study, we confirmed that L. fortunei possess the accessory boring gland on the foot, as seen in most species in Naticidae. Accoeding to the results of the experiment of the blue litmus paper tests of the mucus (secretions) secreted from the accessory boring gland the color of the blue litmus paper did not turn red in color because chemical components of mucus (secretion) secreted from the accessory boring gland on the foot of L. fortunei (boring gastropod) were not acidic components. It is supposed that the mucus, which is secreted from the accessory boring gland, contained gelatin-like substances or enzymes without acidic components, as already reported in Naticidae species. Therefore, these substances may be involved in softening the surface of the valves of M. veneriformis. Consequently, it is assumed thar L. fortunei bores holes through the shells of molluscs by means of following 3 methods: (1) a softening of the calcareous shells of M. veneriformis with chemical secretions (including gellatin-like substances or enzyme except for acidic components) from the accessory boring glands, (2) mechanical rasping with the radula, (3) a combination of both. In this study, particularly, acidic components, which are involved in softening the surface of the shells, are not associated with the boring mechanism of L. fortunei because chemical acidic components were not detected in the mucus (secretion), as found in Naticidae species.

효소에 의한 초지용 펠트의 세척효과 (Cleaning Effect of Papermaking Felt with Enzymes)

  • 윤병태;김성보;엄태진;최명재
    • 펄프종이기술
    • /
    • 제37권3호
    • /
    • pp.17-22
    • /
    • 2005
  • The cleaning efficiency of papermaking felt which is contaminated with fiber fines and various micro-materials was investigated and compared between the application of enzyme and commercial detergent. It was found that the cleaning efficiency by the treatment of acidic-based detergent was more efficient than that of alkaline-based one in the conventional commercial detergent. it was also observed that the treatment design of first acidic-based detergent treatment to second alkaline-based detergent procedure was better in the cleaning efficiency, compared to alkaline based-to-acidic based one. The cleaning property of felt with enzyme was resulted in good cleaning efficiency, without any addition of surfactant. Especially, the enzyme treatment under alkaline condition (pH 10) showed a better cleaning result than that under acidic condition(pH 5). The addition of nonionic surfactant to the enzyme increased the cleaning efficiency of felt and decreased the cationic demand of wastewater. These results showed more favour than the application of conventional commercial detergent.

에탄올아민류 가스에 의한 종이의 탈산화처리 효과 분석 (Deacidification of Paper by the Gaseous Ethanolamine Treatment)

  • 최경화;김영훈;윤병호
    • 펄프종이기술
    • /
    • 제32권1호
    • /
    • pp.72-78
    • /
    • 2000
  • The major cause of paper deterioration is the acid-catalyzed hydrolysis of the cellulose in paper fibres. The deacidification of paper reduced the rate of this deterioration, and it has been reported to extend the useful life of acidic paper by three to five times. It has been recognized the need for an effective method of deacidifying large quantities of books and documents. T도 review of the current state of deacidification technology has been published recently. The paper points to the immediate need for a cost-effective and reliable method to save the millions of books that prish every year. It was tried to deacidify by the gaseous ethanolamine for solving with the above the problem. Acidic paper was treated with the monoethanolamine, diethanolamine, triehtanolamine. It result, it was found that the rate of deacidification was in caused very little grightness and fold endurances. For solving this problem, it was carried with deacidify by combination treatment of the various gaseous ehtnaloamines. In result, decreasing of brightness and fold endurance is reduced.

  • PDF

과당에서 전환된 5-HMF(5-hydroxymethylfurfural)의 정량적 분석 (Quantitative analysis of 5-HMF produced from fructose)

  • 심재훈;신수정
    • 펄프종이기술
    • /
    • 제45권1호
    • /
    • pp.27-34
    • /
    • 2013
  • Quantitative analysis of 5-hydroxymethylfufural (5-HMF) conversion from fructose by dehydration and rearrangement was investigated by $^1H$-NMR spectroscopic method. Fructose was converted to 5-HMF in dimethylsulfoxide (DMSO)-$d^6$ or acidic deuterium hydroxide at controlled reaction temperature and time. With addition of internal standards (biphenyl for DMSO-$d^6$ solvent, and 2,5-dihydroxybenzoic acid for deuterium oxide solvent), conversion from fructose to 5-HMF was analyzed by $^1H$-NMR spectroscopy. Quantitative analysis was run by comparison with peak area integration between of 5-HMF and internal standard. In DMSO solvent, 5-HMF was stable end product but part of 5-HMF was converted to formic and levulinic acid at acidic aqueous medium.

에폭시계 코팅재의 내산열충격 특성에 관한 연구 (Study on the characteristics of acid resistance and thermal shock for epoxy coatings)

  • 이상열;윤병두
    • 수산해양기술연구
    • /
    • 제43권4호
    • /
    • pp.362-369
    • /
    • 2007
  • This paper was studied on the characteristics of acid resistance and thermal shock for epoxy coatings in the strong acidic environment. The exhaust gas system, such as a air preheater, desulfurization equipment, for industrial boiler is damaged by dew point corrosion. To protect the acid corrosion, the coating using nonmetal was applied. The electrochemical polarization test, acid resistance and thermal shock test for epoxy coatings were carried out. And the acid resistance and thermal shock characteristics, aspect, and electrochemical anti-corrosion characteristics for epoxy coatings in the strong acidic environment were considered. The main results are as followings: As the epoxy glass flake coating by acidic thermal shock was damaged to the crack, blistering and elution etc., the current density of epoxy glass flake coating is high. But the damage of epoxy metal complex coating by acidic thermal shock was not occurred. Therefore the characteristics of acid resistance and thermal shock for epoxy metal complex coating is better than those for epoxy glass flake coating.