• 제목/요약/키워드: acid strength

검색결과 1,668건 처리시간 0.023초

양모/카티온화 면 혼방품의 산성염료/직접염료에 의한 1욕2단 염색에 관한 연구 (A Study on the One Bath Two Step Dyeing of Wool/Cationized Cotton Blends With Acid Dye/Direct Dye)

  • 성우경;이춘길
    • 한국의류산업학회지
    • /
    • 제3권2호
    • /
    • pp.168-173
    • /
    • 2001
  • In order to overcome the disadvantage of the conventional two bath dyeing method of wool/cotton blends, it had prompted significant effort to the development of the one bath dyeing method which can accomplish savings in energy, water usage and time. To improve the dyeability of cotton toward direct dyes in a non-electrolytic and acidic dyebath, cotton component was pretreated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. This study was carried out to investigate almost equal color strength between wool component and cationized cotton component when wool/cationized cotton blends was dyed with acid dye/direct dye by the one bath two step method in a non-electrolytic and acidic dyebath.

  • PDF

견의 탄닌처리에 관한 연구(IV) -탄닌처리포의 물성변화- (A Study on the Tannin Treatment of Silk Fabrics(IV) -Change of Properties in Tannin Treated Fabrics-)

  • 설정화;최석철
    • 한국염색가공학회지
    • /
    • 제11권4호
    • /
    • pp.16-23
    • /
    • 1999
  • This study was made to investigate the effects of mimosa tannin and tannic acid on change of properties and photodegradation of silk fabrics according to tannin concentration and irradiation time. The results were as follows. 1. As concentration of tannin increased, thickness, fabric count and stiffness showed no difference. But tensile strength were increased, and elongation were decreased. 2. When concentration of tannin is high, tannin adhered to surface of fabrics. 3. fR absorption bands of untreated silk fabric appeared at $3400cm^{-1},\; 1640cm^{-1},\;1445cm^{-1},\;1235cm^{-1},\;and\;675cm^{-1}$, but those of silk fabric treated with tannic acid appeared at $1710cm^{-1}\;and\;3400cm^{-1}$ by treatment of mimosa tannin, respectively. IR absorption bands of photoirradiated silk fabrics appeared at $3400cm^{-1},\;3280cm^{-1},\;2960cm^{-1},\;2920cm^{-1},\; 1720cm^{ -1},\;1380cm^{-1},\;1280cm^{-1},\;1120cm^{-1},\;and\;1070cm^{-1}$. But those bands were decreased at the silk fabrics treated with mimosa tannin and tannic acid.

  • PDF

New Routes to the Preparation of Silver-Doped Sol-Gel Films for a SERS Study

  • Kang, Jae-Soo;Lee, Chul-Jae;Kim, Mak-Soon;Lee, Mu-Sang
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권11호
    • /
    • pp.1599-1604
    • /
    • 2003
  • New methods were developed to prepare silver-doped sol-gel films for surface-enhanced Raman spectroscopy (SERS) applications. First, silver ions were doped into a sol-gel matrix. The doped silver ions were reduced into corresponding silver metal particles by two reductive procedures; chemical reduction and thermal reduction. The SERS spectra of benzoic acid were used to demonstrate the SERS effect of the new substrates. The adsorption strength of benzoic acid adsorbed on differently reduced substrates was discussed. The possible adsorption form and the orientation of adsorbate were also discussed.

The $CO_{2}$ Hydrogenation toward the Mixture of Methanol and Dimethyl Ether: Investigation of Hybrid Catalysts

  • 준기원;K.S. Rama Rao;정미희;이규완
    • Bulletin of the Korean Chemical Society
    • /
    • 제19권4호
    • /
    • pp.466-470
    • /
    • 1998
  • Catalytic hydrogenation of carbon dioxide for the simultaneous synthesis of methanol and dimethyl ether (together called oxygenates) over a combination of methanol synthesis and methanol dehydration catalysts has been studied. Various methanol synthesis and methanol dehydration catalysts were examined for this reaction. The addition of promotors like $Ga_2O_3\; and\; Cr_2O_3$ to Cu/ZnO catalyst gave much more enhanced yield on the formation of oxygenates. From the results, the promotional effect of $Cr_2O_3$ has been explained in terms of increase in the intrinsic activity of Cu while that of $Ga_2O_3$ being increase in the dispersion of Cu. Among the methanol dehydration catalysts examined, the solid acids bearing high population of intermediate-strength acid sites were found to be very effective for the production of oxygenates. HY zeolite which contains strong acid sites produce small amount of hydrocarbons as by-products. However, CuNaY zeolite in which the presence of strong acid sites are minimum gives very high oxygenates yield without the formation of hydrocarbons.

추출제로 카프르산을 사용한 아연(II)의 흡착 기포 분리 (Adsorptive Bubble Separation of Zinc (II) Using Capric Acid as Collector)

  • Chung Hee Kwak;Chul Lee
    • Nuclear Engineering and Technology
    • /
    • 제15권2호
    • /
    • pp.149-153
    • /
    • 1983
  • 흡착 기포 분리에 의하여 수용액으로부터 아연(II)을 회수하는 방법에 관하여 연구하였다. 그리고 흡착 기포 분리에서 용매부선 과정과 거품 분별 과정에 채용되었고 이들 분리 과정에서 카프르산을 아연의 회수 물질로 사용하였다. 이온 강도 및 수소이온의 농도가 분리 과정의 효율에 어떤 영향을 미치는지를 기술하였으며, 추출제로 벤젠에 녹은 카프르산을 이용한 용매 추출과정과도 상호 비교하였다.

  • PDF

Enamel Microabrasion을 시행한 법랑질과 복합레진의 전단결합강도 (SHEAR BOND STRENGTH OF COMPOSITE RESIN TO ENAMEL FOLLOWING ENAMEL MICROABRASION)

  • 홍기상;이상대;이상훈
    • 대한소아치과학회지
    • /
    • 제27권1호
    • /
    • pp.45-53
    • /
    • 2000
  • Enamel microabrasion은 염산과 연마제를 사용하여 치아의 착색을 제거하는 술식으로서, 그 효과는 법랑질 표층에 국한된다. Enamel microabrasion으로 모든 착색이 치료 가능한 것은 아니므로, 착색이 깊을 경우에는 microabrasion 후에도 제거되지 않고 남은 착색부위를 광중합 복합레진을 사용해 수복할 것이 권장된다. 본 연구의 목적은 enamel microabrasion의 방법과 시간이 법랑질에 대한 복합레진의 전단결합강도에 미치는 영향을 조사하는 것이었다. 아무런 처치도 하지 않은 대조군을 1군으로 하였고, 18% 염산과 fine pumice의 혼합물을 hand applicator로 치면에 5초씩 5, 10회 적용시킨 것을 각각 2, 3군으로 하였다. 10% 염산과 연마제의 혼합물인 기성품 PREMA를 10 : 1 gear reduction handpiece로 20초씩 5, 10회 적용시킨 것을 각각 4, 5군으로 하였다 여기에 37% 인산으로 부식 후 복합레진을 결합시켜 thermocycling 후 전단결합강도를 측정하여 다음과 같은 결론을 얻었다. 1. 2군이 가장 높은 결합강도$(24.36{\pm}3.34MPa)$를 나타내었고, 3군이 가장 낮은 결합강도$(19.35{\pm}3.43MPa)$를 보였다. 전단결합강도는 2>4>5>1>3군의 순서로 감소하였다. 2. 2군은 1군과 3군보다 통계학적으로 유의성 있게 높은 결합강도를 나타내었다(p<0.05). 3. 염산과 pumice로 enamel microabrasion을 시행한 2, 3군과 PREMA를 사용한 4, 5군 사이에는 유의한 결합강도의 차이가 없었다(p>0.05). 4. 파절면 검사에서, adhesive failure는 3, 4군에서 나타났고, cohesive failure는 1, 2, 3, 4군에서 관찰되었다. 5군에서는 mixed failure만이 관찰되었다. 5. SEM 관찰에서, 염산과 pumice로 enamel microabrasion을 시행한 2, 3군에서는 인산으로 부식한 것과 비슷한 표면 양상이 관찰되었고, PREMA로 처리한 4, 5군에서는 1군과 흡사한 매끈한 표면양상이 관찰되었다. 각 군의 시편을 인산으로 부식시킨 다음에는 전형적인 산부식 후의 표면양상이 관찰되었고, 군간 별다른 차이가 없었다.

  • PDF

비교원성 단백질이 상아질 접착제의 결합강도와 교원질의 형태에 미치는 영향 (THE EFFECT OF THE REMOVAL OF CHONDROITIN SULFATE ON BOND STRENGTH OF DENTIN ADHESIVES AND COLLAGEN ARCHITECTURE)

  • 김종률;박상진;최기운;최경규
    • Restorative Dentistry and Endodontics
    • /
    • 제35권3호
    • /
    • pp.211-221
    • /
    • 2010
  • 본 연구는 상아질의 비교원성 단백질을 chondroitinase ABC (C-ABC)를 이용하여 제거함으로써 비교원성 단백질의 제거가 상아질 접착제의 미세인장결합강도와 교원질망의 형태에 미치는 영향을 상아질의 다양한 습윤상태에 따라 평가하고자 시행하였다. 비교원성 단백질의 상아질접착제의 미세인장강도에 대한 영향을 평가하기 위해 제 3대구치의 상아질을 노출시키고, 두 군으로 나누고 한 군은 C-ABC, 다른 군은 증류수를 $37^{\circ}C$에서 48시간 동안 적용한 후, 상아질의 습윤상태(wet, dry 및 re-wet)와 상아질 접착제(Single Bond 2, One Step Plus)를 다르게 이용하여 복합레진을 수복하였다. 24시간 후 가로 1 mm, 세로 1mm의 시편을 제작하고 미세인장강도를 측정하였다. 상아질 교원질의 형태변화를 관찰하기 위하여 상아질 시편에 산부식을 시행하고 C-ABC 적용 후, 시편을 제작하였고 미세인장강도 측정후 파괴된 접착면의 파괴양상과 각 접착제의 접착계면 관찰을 위하여 FE-SEM 관찰하였다. C-ABC 처리여부와 관계없이 습윤한 상아질면에 접착한 군은 모든 접착제에서 통계학적으로 유의성있는 미세인장결합강도의 차이를 나타나지 않았다(p > 0.05). C-ABC를 적용하였을 경우, Single Bond 2에서는 재수화한 상아질면에 접착한 군이 습윤한 상아질면에 접착한 군에 비해 미세인장결합강도가 감소하였다(p < 0.05). FE-SEM 관찰결과, C-ABC를 적용후에는 접착성 파괴가 주로 일어났으며, 교원질 섬유간 거리가 증가하였으며 부분적으로 교원질 섬유들간에 응집된 양상이 관찰되었다.

산란계 사육에 있어서 한방 조성물의 항생제 대체 효과(II) - 산란과 계란품질 중심 - (Effect of the Mixed Herbal Medicine for the Substitution of Antibiotics on the Performance of Laying Hens(II) - Part of Laying Period and Egg Quality -)

  • 박문기;김기욱;권기찬
    • 한국환경과학회지
    • /
    • 제17권5호
    • /
    • pp.537-546
    • /
    • 2008
  • The experiment was conducted to determine the effect of the mixed herbal medicine for the substitution of antibiotics on the performance of laying hens. Day old hyline 1,500 layer chicks were randomly assigned to 4 treatments. Control were 600 and three each treatment was 300. Eggs were collected at every weeks for measuring egg production and week 26, 27, 28 for chemical analyses. Chemical analyses were done for fatty acid profile of egg yolks, amino acid, antibiotics residue in eggs(collect eggs after supplying OTC 21ppm/bird/day to control for four day at 26, 27, 28) during the laying period($19{\sim}77wk$). On $0{\sim}4$ week, T-3 showed higher feed intake than those fed the other diets and on $5{\sim}13$ week, T-2 showed highest feed intake among treatments. After birds were moved ($14{\sim}18$ wk) CT-3 showed highest, but for overall rearing period, there was not significantly different among treatments. In conclusion the mixed herbal medicine did not tended to influence palatability to rearing birds. Egg quality(egg yolk color, haugh unit, eggshell breaking strength) showed no difference among treatments. Ratio of unsaturated fatty acid (mg/100g)/saturated fatty acid (mg/100g) was not difference among treatments, but linolenic acid and docosahexaenoic acid(DHA) of the mixed herbal medicine treatments showed higher then control. The antibiotics residue of CT, T treatments egg was not detected and control was not detected or below allowance. In conclusion the mixed herbal medicine can be possible to feed laying hen without antibiotics.

Hydrophilization of hydrophobic membrane surfaces for the enhancement of water flux via adsorption of water-soluble polymers

  • Kim, Ka Young;Rhim, Ji Won
    • Membrane and Water Treatment
    • /
    • 제7권2호
    • /
    • pp.101-113
    • /
    • 2016
  • In this study, to improve the water flux of porous hydrophobic membranes, various water-soluble polymers including neutral, cationic and anionic polymers were adsorbed using 'salting-out' method. The adsorbed hydrophobic membrane surfaces were characterized mainly via the measurements of contact angles and scanning electron microscopy (SEM) images. To enhance the durability of the modified membranes, the water-soluble polymers such poly(vinyl alcohol) (PVA) were crosslinked with glutaraldehyde (GA) and found to be resistant for more than 2 months in vigorously stirred water. The water flux was much more increased when the ionic polymers used as the coating materials rather than the neutral polymer and in this case, about 70% of $0.31L/m^2{\cdot}h$ (LMH) to 0.50 LMH was increased when 300 mg/L of polyacrylamide (PAAm) was used as the coating agents. Among the cationic coating polymers such as poly(styrene sulfonic acid-co-maleic acid) (PSSA_MA), poly(acrylic acid-comaleic acid) (PAM) and poly(acrylic acid) (PAA), PSSA_MA was found to be the best in terms of contact angle and water flux. In the case of PSSA_MA, the water flux was enhanced about 80%. The low concentration of the coating solution was better to hydrophilize while the high concentration inclined to block the pores on the membrane surfaces. The best coating condition was found: (1) coating concentration 150 to 300 mg/L, (2) ionic strength 0.15, (3) coating time 20 min.

카올리나이트에 대한 휴믹산 및 아메리슘 흡착거동 연구 (A Study of Adsorption Behaviour of Humic Acid and Americium on the Kaolinite)

  • 이명호;이규환;박경균;정의창;송규석;신현상
    • 방사성폐기물학회지
    • /
    • 제8권2호
    • /
    • pp.107-113
    • /
    • 2010
  • 본 연구에서는 pH 변화에 따른 카올리나이트-휴믹산, 카올리나이트-아메리슘 및 휴믹산-아메리슘 등의 이성분계 흡착반응을 조사하였다. 카올리나이트의 물리화학적 특성을 조사한 후, 휴믹산농도, 이온강도 및 pH 변화에 따른 카올리나이트에 휴믹산의 흡착실험을 하였다. pH 및 HA 농도가 증가함에 따라 KA에 대한 HA의 흡착율이 감소하였으나, 이온강도가 증가함에 따라 HA의 흡착율이 증가하였다. 또한 pH 변화에 따른 카올리나이트와 아메리슘과 흡착반응 및 아메리슘과 휴믹산과의 흡착반응도 연구하였다. 산성 및 중성영역에서는 Am이 HA에 쉽게 흡착되었으나, 염기성 영역에서는 정전기적 반발력으로 HA에 대한 Am 흡착이 감소되었다. 본 연구 결과는 수환경에서 휴믹산에 의한 아메리슘 흡착거동 특성을 이해하는데 활용이 가능하다.