• International Journal of Concrete Structures and Materials
• /
• v.8 no.3
• /
• pp.259-268
• /
• 2014

This paper presents results of an experimental study which investigates the effect of industrial pozzolan made from calcined silt of dam at $750^{\circ}C$ for 5 h, on mechanical properties and durability of ordinary mortar, compared to the silica fume. Mortar specimens prepared with 5, 10 and 15 % of calcined silt to substitute cement were evaluated for their compressive and flexural strength, sulfate, acid and penetration of chloride ions resistance. The results were compared with ordinary mortar (without addition) and mortar containing 10 % of silica fume. The results obtained showed that the calcined silt of dam has a high potential to be used as a pozzolanic material, it improves the strength and the durability of mortar and compete the silica fume.

• Macromolecular Research
• /
• v.14 no.6
• /
• pp.634-639
• /
• 2006

Waterborne polyurethane (WBPU) adhesive with varying amounts of dimethylol propionic acid (DMPA) was synthesized by prepolymer process and blended with polyisocyanate hardener. The mean particle size of the WBPU dispersion decreased with increasing DMPA content. $^1H$ NMR spectroscopy confirmed the formation of allophanate bonds and biuret bonds due to the reaction of hardener NCO with urethane/urea groups. The optimum NCO content with the greatest adhesive strength was dependent on the total content of urethane/urea groups in the WBPU molecules. The optimum NCO content increased with increasing number of urethane groups (DMPA content). The adhesion strength of WBPU adhesives was maximized at a molar ratio of hardener NCO to urethane/urea of about 0.28.

• Journal of the Korean Wood Science and Technology
• /
• v.8 no.2
• /
• pp.1-5
• /
• 1980

This study is carried out to determine the scavenging effect of resorcinol added into the urea formaldehyde resin on the formaldehyde release of plywood, as the preliminary study of using the phenolic substances. The method for formaldehyde determination used in this report is the improved chromotropic acid determination. The results are summarized as follows: 1. Resorcinol added into the urea formaldehyde adhesive acts as a good scavenger. 4 percent of resorcinol reduced the formaldehyde release to less than half content. 2. Adding resorcinol gave better glue shear strength than that of control, showing the peak of the shear strength, at 2 percent and decreased to the same strength as control along its content of 4 percent. 3. Moisture content of air dried plywood met the standard very well.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.881-884
• /
• 2006

Wasted phosphogypsum is a by-product from the phosphoric acid process of manufacturing fertilizers. It consists mainly of $CaSO_4{\cdot}2H_2O$ and contains some impurities. The purpose of this study is to utilize wasted phosphogypsum into an admixture for concrete products cured by steam This paper is to investigate the strength properties of cement composites containing high volume phosphogypsum. The cement composites were composed of OPC, phosphogypsum, fly-ash and granulated blast-furnace slag with activators. As a result, the strength of cement composites containing high volume wasted phosphogypsum were shown high level when granulated blast-furnace slag was mixed. Therefore, PG could be used as a steam curing admixture for concrete 2th production with reduction of OPC.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.3
• /
• pp.73-78
• /
• 2009

Coal ash is a by-product of the combustion of pulverized coal, and much of this is dumped in landfills. The disposal of coal ash is one of the major issues for environmental problems. In this paper, the effects of the kinds and replacement ratio of coal ash on the durabilities of concrete mixtures are investigated. Fine aggregate was replaced with coal ash(fly ash and bottom ash) in five different ratios, of 0%, 10%, 20%, 35%, and 50% by volume. Test results indicated that the compressive strength increased with the increase in fly ash percentage. The loss of compressive strength of bottom ash concrete mixes after immersion in sulphuric acid solution was less than in the control mix(BA0). In addition, the carbonation depth of fly ash concrete mixes was lower than the control mix(FA0).

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.618-618
• /
• 2003

The purpose of this study was to evaluate the etching effects and bond strength of total etching and self-etching adhesive system on unground enamel using scanning electron microscopy and microtensile bond strength test. The buccal coronal unground enamel from human extracted molars were prepared using low-speed deamond saw. Scotchbond Multi-Purpose(group CM), Clearfil SE Bond(group SE), or Adper Prompt L-pop(group LP) were applied to the prepared teeth, and resin compasite(Z-250) was built up incrementally. Resin tag formation were evaluated by scanning electron microscopy, after removal of enamel surface by acid dissolution and dehydration.(중략)

• Journal of Integrative Natural Science
• /
• v.7 no.1
• /
• pp.5-10
• /
• 2014

A study that copolymerized Ag nanoparticle and furfuryl isocyanate with the crosslinking agent EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), MA (methacrylic acid) and the initiating agent AIBN (azobisisobutyronitrile) is presented. Measurement of the physical characteristics of the produced macromolecule showed that the water content is 32.08~32.67%, refractive index 1.446~1.448, visible light transparency 83.2~67.6%, contact angle $68.2{\sim}83.5^{\circ}$ and tensile strength 0.541~0.755 kgf. It is also demonstrated that the addition of Ag nanoparticles is associated with the reduction of UV-B transmittance and increase in tensile strength. The results show that the produced copolymer can be used as a material for ophthalmic lenses with durability and UV-blocking properties.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.746-752
• /
• 1993

Quantitative measurements have been made by using equilibrium dialysis techniques on the extent of complexation between PCB and dissoved humic acid(HA). This research investigates the effectiveness of activated carbon adsorption for the removal of PCB from organic free water and humid acid background solution by using bench-scale equilibrium and rate tests. It was found that the extent of complexation depended on the pH, calcium concentration, ionic strength, and the concentration of humic acid. When HA was present, activated carbon capacity was greatly reduced due to complexation and competitive adsorption effects and the adsorption characteristics became complicated by the presence of various species such as the unassociated HA, PCB, and PCB-HA complexes.

• Journal of Marine Bioscience and Biotechnology
• /
• v.11 no.2
• /
• pp.36-41
• /
• 2019

This study was conducted to analyze the difference in mechanically improved properties by distinguishing α-chitin and β-chitin for Poly(L-lactic acid)(PLLA). First, dissolution of chitins was established by mixing polar solvents hexafluoroisopropanol (HFIP) and trifluoroacetic acid (TFA) in appropriate proportions. Under these conditions, the dissolved chitin was used for electrospinning with other polymers. The electrospun nanofibers of the PLLA and chitins were successfully produced. Compared to the pristine state, when chitin was added to PLLA, the tensile strength increased 1.41 times (α-chitin), by 1.61 times (β- chitin), respectively. Based on this, it was confirmed that α- and β- chitin could be strategically used for different polymers. The results also suggest that chitin can be applied to various fields as good reinforcing material as well as electrospinning.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.1902-1906
• /
• 2011

Sulfonated poly(fluorinated arylene ether)s (SDF-F)/poly[(N-vinylimidazole)-co-(3-methacryloxypropyl-trimethoxysilane)] (poly(VI-co-MPS))/poly(tetrafluoroethylene) (PTFE) is prepared for a high temperature proton exchange membrane fuel cell (PEMFC). The reaction of the membrane with phosphoric acid forms silicate phosphor, as a chemically bound proton carrier, in the membrane. Thus-formed silicate phosphor, nitrogen in the imidazole ring, and physically bound phosphoric acid act as proton carriers in the membrane. The physico-chemical and electrochemical properties of the membrane are investigated by various analytical tools. The phosphoric acid uptake and proton conductivity of the SDF-F/poly(VI-co-MPS)/PTFE membrane are higher than those of SDF-F/PVI/PTFE. The power densities of cells with SDF-F/poly(VI-co-MPS)/PTFE membranes at 0.6 V are 286, 302, and 320 mW $cm^{-2}$ at 150, 170, and 190 $^{\circ}C$, respectively. Overall, the SDFF/poly(VI-co-MPS)/PTFE membrane is one of the candidates for anhydrous HT-PEMFCs with enhanced mechanical strength and improved cell performance.