• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1136-1141
• /
• 2003

The primary insulation materials used in an oil filled transformer are kraft paper, wood, porcelain and oil. Modern transformers use chemically treated paper to improve its tensile strength and resistance to aging caused by immersion in oil. But these insulation papers are mainly aged by thermal stress. Over the life time of the insulation paper and oil, it is exposed to high temperatures, oxygen and water. Its interaction with the steel of the tank and core plus the copper and aluminium of the windings will eventually cause the chemical properties of the oil to decay. High temperature have an effect on mechanical strength of cellulous paper used in the layer insulation. We made two aging cells in which insulation papers and mineral oil are conducted to test thermal properties. It is measured dielectric strength, number of acid, moisture, etc. of insulation paper and oil aged in the aging cells.

• Elastomers and Composites
• /
• 제52권1호
• /
• pp.59-68
• /
• 2017

The effect on the hydrolysis resistance properties by the addition of maleic anhydride grafted EMDM (MA-g-EPDM) and PP (MA-g-PP) to a PA66/GF composite was investigated with respect to the mechanical properties, thermal properties, and morphology. The degree of hydrolysis of the PA66/GF composite was measured using py-GC/MS analysis. When compared to the PA66/GFcomposite in MEG/water solution, the composites where MA-g-EPDM and MA-g-PP were added to PA66/GF showed a higher degree of hydrolysis resistance, impact strength, and thermal properties, whereas their tensile strength, tensile modulus, flexural strength and flexural modulus decreased. As immersion time in the solution increases, the rate of tensile strength drop of the MA-g-PP added composite appeared lower than that of the PA66/MA-g-EPDM/GF and PA66/GF composites. The py-GC/MS analysis confirmed the formation of PA66 hydrolysis reaction by products such as carboxylic acid and alkylamine with increasing immersion time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.165-168
• /
• 2000

This paper presents the tracking resistance and mechanical strength due to boiling absorption of epoxy resin. The single network structure specimen(E series) formed of epoxy alone and interpenetrating polymer network(IPN) structure specimen(EM series) which epoxy resin was taken as first network and methacrylic acid resin as second network were manufactured. As adding $SiO^2$ filler classified by o[phr], 50[phr] and 100[phr] to those specimens, six kinds of specimens were manufactured and boiled in water during 2, 4, 8, 16, 32 and 64[hours]. As a result, it was confirmed that the tracking breakdown time of E series showed a abrupt decrease with boiling time increasing, but that of EM series was decreasing smoothly. Also, it was verified that the degrading rates of mechanical strength was lowerd according to improvement of adhension strength in case of EM series.

• 약학회지
• /
• 제9권1_2호
• /
• pp.4-7
• /
• 1965

Acid dissociation constants of sulfamethoxypyridazine, sulfadimethoxine, sulfamerazine, sulfathiazole and sulfadiazine, and stability constants for formation of copper chelate were calculated from their titration curves in 80% dimethylformamide with ionic strength 0.1 at $25{\deg}$ It was found that the acid dissociation constants (pKa) of sulfa-drugs were in the range of 9.33 - 10.05, and the stability constants (log $k_{1}$, $k_{2})$ of their copper chelates were in the range of 9.33-9.71.

• 대한화학회지
• /
• 제41권8호
• /
• pp.437-441
• /
• 1997

The acid strngth of cations, determined with ICP (Ionic Covalent Parameter): ICP=log(P)-1.38x+2.07 where P is the polarizing power and X its electronegativity expresses the competition between the covalent and ionic forces. This concept, together with electronegativity, is used to describe the properties of oxides with various electronic properties (insulators, metals, degenerate semiconductors, superconductors).

• 대한의용생체공학회:의공학회지
• /
• 제38권1호
• /
• pp.1-8
• /
• 2017

The successful synthesis of hyaluronic acid micro-threads is very promising approach for the broad application in tissue engineering such as dermal fillers. Because hyaluronic acid has the excellent biocompatibility and ability to maintain the moisture of up to several hundred times its own weight. In order to generate the hyaluronic acid micro-threads in microfluidic system, we employed two-phase flow microfluidic chip to make a rapid synthesis of the hyaluronic acid hydrogel. Hyaluronic acid was mixed with 0.02N NaOH solution and 1, 4-Butanediol diglycidyl ether (BDDE) solution and then injected into core channel. The ethanol was used for the 3-dimensional micro-thread formation in sheath channel. We manipulated the diameter of HA micro-threads using controlling of flow rates in microfluidic chip, and showed the feasibility of immobilization in HA micro-threads with florescent substances. Also, the generated HA micro-threads were evaluated and showed the suitable properties with tensile strength, bending property, and swelling profiles for dermal fillers. As a result, we suggested an innovative method for microfluidic chip-based HA micro-threads which could safely be applied as dermal filler in tissue engineering.

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.35-49
• /
• 2014

This paper studies the behaviour of deteriorated reinforced concrete (RC) beams attacked by various forms of simulated acid rain. An artificial rainfall simulator was firstly designed and evaluated. Eleven RC beams ($120mm{\times}200mm{\times}1800mm$) were then constructed in the laboratory. Among them, one was acting as a reference beam and the others were subjected to three accelerated corrosion methods, including immersion, wetting-drying, and artificial rainfall methods, to simulate the attack of real acid rain. Acid solutions with pH levels of 1.5 and 2.5 were considered. Next, ultrasonic, scanning electron microscopy (SEM), dynamic, and three-point bending tests were performed to investigate the mechanical properties of concrete and flexural behaviour of the RC beams. It can be concluded that the designed artificial simulator can be effectively used to simulate the real acid rainfall. Both the immersion and wetting-drying methods magnify the effects of the real acid rainfall on the RC beams.

• The Korean Journal of Physiology and Pharmacology
• /
• 제18권5호
• /
• pp.441-446
• /
• 2014

Ursolic acid (UA), a type of pentacyclic triterpenoid carboxylic acid purified from natural plants, can promote skeletal muscle development. We measured the effect of resistance training (RT) with/without UA on skeletal muscle development and related factors in men. Sixteen healthy male participants (age, $29.37{\pm}5.14$ years; body mass index=$27.13{\pm}2.16kg/m^2$) were randomly assigned to RT (n=7) or RT with UA (RT+UA, n=9) groups. Both groups completed 8 weeks of intervention consisting of 5 sets of 26 exercises, with 10~15 repetitions at 60~80% of 1 repetition maximum and a 60~90-s rest interval between sets, performed 6 times/week. UA or placebo was orally ingested as 1 capsule 3 times/day for 8 weeks. The following factors were measured pre-and post-intervention: body composition, insulin, insulin-like growth factor-1 (IGF-1), irisin, and skeletal muscle strength. Body fat percentage was significantly decreased (p<0.001) in the RT+UA group, despite body weight, body mass index, lean body mass, glucose, and insulin levels remaining unchanged. IGF-1 and irisin were significantly increased compared with baseline levels in the RT+UA group (p<0.05). Maximal right and left extension (p<0.01), right flexion (p<0.05), and left flexion (p<0.001) were significantly increased compared with baseline levels in the RT+UA group. These findings suggest that UA-induced elevation of serum irisin may be useful as an agent for the enhancement of skeletal muscle strength during RT.

• 대한소아치과학회지
• /
• 제35권2호
• /
• pp.195-204
• /
• 2008

치아 우식증과 침식증의 진단과 본 연구는 교정용 밴드 사용의 대안으로 제시된 직접 부착 술식이 보철 치료를 받은 치아상에서도 적절한 결합 강도를 갖으면서 임상적으로 유용하게 사용될 수 있는지를 평가하고, 불산과 포세린 전처리제의 사용 여부에 따른 결합 강도와 접착 파절 양상의 차이에 대해 알아보고자 시행하였다. 사람의 상하악 소구치 치관 20개를 대조군으로, 소구치의 협면을 복제한 포세린 치관 80개를 실험군으로 나눈 후, 대조군은 37% 인산으로 산부식한 후 Transbond $XT^{(R)}$를 이용하여 금속 브라켓을 접착하였고, 실험군들은 모두 포세린 치관에 통상적으로 sandblasting 처리를 하되, 9.6% 불산으로 4분간 부식처리를 함께 한 군, 포세린 전처리제를 적용한 군, 마지막으로 sandblasting과 불산 그리고 포세린 전처리제를 모두 적용한 군으로 20개씩 나눈 후 금속 브라켓을 접착하였다. 각 군간 전단 결합 강도와 접착 파절 양상을 비교하여 관찰한 결과, 포세린 치관에 금속 브라켓을 접착할 시, 기존의 비심미적인 밴드를 사용하지 않더라도 sandblasting과 불산 그리고 포세린 전처리제를 이용한 직접 부착 술식으로 임상적으로 유용하게 사용될 수 있음을 알 수 있었다.

• 접착 및 계면
• /
• 제16권1호
• /
• pp.29-34
• /
• 2015

석유수지는 분자량이 작고 무정형인 열가소성 수지로써 다양한 접착제 및 고무의 가공조제, 필름의 첨가제 등으로 사용되고 있다. 석유수지의 단점은 비극성이기 때문에 비극성의 폴리머와의 상용성은 우수하나 아크릴 및 우레탄, 폴리아마이드와 같은 극성기를 포함하는 폴리머와의 상용성은 좋지 않다. 그뿐만 아니라, 최근 석유수지의 원료로 사용되는 나프타 크래킹 공정에서 나오는 부산물의 양이 가스 크래킹의 확대 적용으로 인해 줄어들고 있는 상황이다. 이러한 문제를 해결하기 위해 본 연구에서는 석유수지 원료로 극성기를 포함하면서 지속 가능한 신규 원료인 소르빅산으로 일부 대체하고자 하였다. 기존 석유수지 원료인 DCPD 모노머와 블루베리로부터 생성되는 소르빅산은 열중합에 의해 Diels-Alder 반응으로 성공적으로 공중합하였다. 소르빅산 변성 수소첨가 DCDPD계 석유수지는 아크릴계 접착제 배합에 적용되어 다양한 점 접착 물성이 측정되었으며, Polarity에 따른 상용성 및 연화점에 따라 최적 물성이 결정되었다.