• 분석과학
• /
• 제29권1호
• /
• pp.19-28
• /
• 2016

2009~2014년에 제주지역의 강수시료(n=284)를 채취하여 주요 이온 성분을 분석하였다. 분석 정확도 확인을 위해 이온수지, 전기전도도, 산분율 비교법으로 회귀분석을 실시한 결과, 이들의 상관계수는 0.927~0.983의 범위로 양호한 직선성을 나타내었다. 강수의 부피가중평균 pH 4.9, 전기전도도는 22.7 µS/cm, 이온세기는 0.27±0.38 mM로 시료 중 약 35.9 %가 순수한 빗물 수준을 보였다. 강수 이온성분의 부피가중 평균농도(µeq/L)는 Na⁺ > Cl⁻ > nss-SO₄²⁻ > NO₃⁻ > NH₄⁺ > Mg²⁺ > H⁺ > nss-Ca²⁺ > PO₄³⁻ > K⁺ > HCOO⁻ > CH₃COO⁻ > NO₂⁻ > F⁻ > HCO₃⁻ > CH₃SO₃⁻ 순이었다. 강수의 산성화 기여율은 황산과 질산의 기여율이 각각 54.5 %, 36.5 %인 반면에 유기산 음이온인 HCOO⁻ 와 CH₃COO⁻ 의 기여율은 각각 4.8 %, 4.2 %를 나타내어 제주지역 강수의 산성화는 유기산보다는 주로 무기산에 의해 일어나고 있음을 확인할 수 있었다. 또한 중화인자를 확인한 결과, NH₃에 의한 중화인자는 33 %를 나타내었고 CaCO₃에 의한 중화인자는 20 % 이었다.

• 한국식품저장유통학회지
• /
• 제9권3호
• /
• pp.271-276
• /
• 2002

항균력의 우수성이 확인된 황금추출물을 포장필름소재로 개발하여 과채류에 대한 포장실험을 한 결과는 다음과 같다. 즉, 1% 농도로 황금추출물을 첨가시킨 저밀도 폴리에틸렌(LDPE) 필름에 의하여 딸기를 포장하고 5$^{\circ}C$에서 저장하면서 품질변화를 실험한 결과 무첨가 대조필름에 비해 호기성 총균수, 곰팡이 및 효모수로 측정된 미생물의 증식을 억제하는 것으로 나타났다. 이러한 미생물 증식억제의 효과로 인하여 항균성 필름은 포장된 딸기의 부패율을 낮추어 주고, 연화를 억제하였다. 딸기의 저장 중 pH는 상승하고 적정산도는 감소하였으며, 가용성 고형분은 감소하는 경향을 보였으나, 포장처리구 간에는 유의하고 일관성 있는 차이를 발견할 수 없었다. 아울러, 시설채소산물인 오이를 항균필름에 싸서 포장하고 1$0^{\circ}C$에서 저장하면서 미생물 성장, 부패율, 경도, 화학적 품질을 측정한 결과, 대조구에 비교해서 긍정적인 결과를 얻을 수 있었다. 이는 대조구(LDPE) 필름에 비교해서 항균소재를 첨가한 LDPE필름으로 포장한 경우, 대체적으로 오이의 연화는 지연되었고, ascobic acid함량의 감소폭도 완만한 것으로 나타났다. 미생물 성장 역시 억제되는 것을 볼 수 있었고, 그 결과, 저장오이의 부패율도 크게 감소하는 것으로 나타났다. 따라서, 황금추출물과 같은천연항균소재로 제조한 항균필름으로 과채류를 포장하여 저장.유통하는 경우, 과채류의 공급 및 수요면에서 과채류의 부가가치를 향상시켜 국제경쟁력을 향상시킬 수 있는 긍정적인 효과를 나타내는 결과를 확인할 수 있었다.이 진행됨에 따라 감소하였으며(P<.05), 상대적 사료가치는 참나무지엽과 소나무지엽이 비슷하였고 생육이 진행됨에 따라 낮아지는 경향이었다. 탄닌 함량은 참나무지엽과 소나무지엽이 각각 2.96%, 6.27%로 소나무지엽이 높았으며 지엽을 건조하였을 때 각각 2.46%, 4.79%로 탄닌 함량이 낮아지는 경향이었다.＋8%). 본 연구결과 70 mM Fru＋Tre (two combination)가 첨가구가 가장 높은 전진운동율을 얻었으며, 0.25 $m\ell$ straw에 10분간 예비동결을 실시하는 것이 가장 높은 동결융해 후 생존율을 얻을 수 있었다.상호 비교한 결과, 식물의 오존 피해를 직접적으로 표현할 수 있는 3개월 간의 식생보호 지표들과 법적 기준치인 100ppb를 넘는 연간 시간수를 상호 보완하여 오존에 의한 식생 피해를 추정하는 것이 바람직하다.tly different in flatfish and porgy. The number of bacteria tended to decrease in each time-differential sampling (P＜.00l). The final food products showed no food-poisoning bacteria in all the time-differential tests and in all the samplings, which proves that the CCP of the HACCP system is under control. After the SSOP program was applied, no pathogenic bacteria were

• 청정기술
• /
• 제20권3호
• /
• pp.232-240
• /
• 2014

폴리염화비닐(polyvinyl chloride, PVC)은 자동차 내장재(도어 트림 및 대쉬 보드 등)에 아주 널리 사용되고 있으나 특정조건에서 유해물질을 배출하므로 규제가 되는 소재로 알려져 있다. 그러므로 열가소성 폴리올레핀계 고분자인 폴리프로필렌(polypropylene, PP)이 자동차 내장재 부분에서 PVC를 대체할 수 있는 중요한 재료로 부각되고 있다. PP(비정영역:0.855, 결정영역:$0.946g/cm^3$)의 또 다른 장점은 PVC($1.1{\sim}1.45g/cm^3$)에 비해 밀도가 낮으므로 자동차의 중량을 줄일 수 있다는 것이다. 한편 모든 부품은 표면보호와 미관상 코팅이 반드시 필요하며, 그들을 조립하는데 접착제가 필요하다. 지금까지 주로 사용해 온 용제-베이스의 접착제/코팅제의 경우 휘발성 유기화합물(volatile organic compounds, VOC)의 발생과 열악한 작업 환경으로 환경친화적인 수성 접착제/코팅제의 수요가 증가하고 있다. 이러한 맥락에서 본 연구에서는 소수성 고분자 PP에 적용되는 환경친화적인 다양한 수분산 폴리우레탄-우레아 선처리제(primer: 마감도료가 기질에 보다 잘 접착될 수 있도록 선처리하는 도료)를 이온성분 dimethyl propionic acid (DMPA) 함량별, 다양한 NCO/OH 몰비, 변성 실리콘 디올의 다양한 함량 및 소프트세그먼트 함량 등의 여러 배합으로 제조하였다. 제조된 시료 중 DMPA 함량 21 mol%, 소프트세그먼트 함량 73%, 변성 실리곤 디올 5 wt% 및 NCO/OH 몰비 1.2를 사용한 시료가 기질 PP 시트와의 접착력이 우수하였으며, 첨가제는 분산제 0.5 wt%, 레벨링제 0.5 wt%, 소포제 1.5 wt% 및 소광제 3.0 wt%가 가장 적합한 첨가 함량임을 알 수 있었다.

• 한국가금학회지
• /
• 제30권4호
• /
• pp.219-228
• /
• 2003

본 실험은 stevioside를 추출하고 폐기되는 스테비아 부산물의 사료적 가치를 구명하기 위하여 육계와 산란계에 급여하여 생산성에 미치는 영향을 고찰하였다. 실험 1은 1일령 육계 수컷 로스를 평사로 배치하여 스테비아 부산물 0, 2, 4, 8% 수준으로 급여하였으며, 처리구당 4반복, 반복당 16수로 총 256수를 공시하였다. 모든 처리구의 사료내 영양소 함량은 스테비아 수준에 관계없이 사육 전기와 후기에 따라 각각 CP 21.5%, ME 3,100kcal/kg와 CP 19%, ME 3,100kcal/kg 수준으로 동일하게 급여하였다. 본 실험의 결과, 1-3주 동안의 증체량에 있어서는 스테비아 부산물 4%와 8% 급여구가 대조구에 비하여 유의적으로 감소하였으나 4-5주 동안에서는 차이가 없었다. 사료섭취량과 사료요구율은 시테비아 부산물 급여구와 대조구 사이에서 차이가 없는 것으로 나타났다 스테비아 부산물의 급여가 장내 미생물의 변화에 미치는 영향은 대조구와 유의적인 차이가 없었으나 맹장의 Salmonella, E. coli는 감소하고 Lactobacillus 및 Yeast는 증가하는 경향을 보였다. 또한 스테비아 부산물을 급여하여 생산된 가슴육의 지방산 함량에서도 차이가 없는 것으로 나타났다. 실험 2는 스테비아 부산물의 사료적 가치를 구명하기 위하여 산란계 사료에 혼합하여 산란율, 사료섭취량, 사료요구율, 난 품질, 계란의 지방산에 미치는 영향을 고찰하였다. 공시계는 78주령 하이라인 360수로 강제환우 후 5% 산란시기에 도달하였을 때 20주간 사양 실험을 시행하였다. 스테비아 부산물을 산란계 사료에 0, 2, 4 그리고 8% 수준으로 첨가하여 4개 처리구를 두었고, 처리구당 5반복, 반복당 18수씩 총 360수를 공시하였다. 모든 처리구의 사료영양소 함량은 CP 16%, ME 2,800 kcal/kg으로 동일하게 하였다. 전 실험기간에 산란율은 스테비아 부산물 급여구와 대조구 사이에 유의적인 차이는 없었다. 난중과 산란량에 있어서도 차이가 없었으며, 사료섭취량과 사료요구율도 스테비아 부산물 급여구와 대조구 사이에서 차이가 없는 것으로 나타났다. 스테비아 부산물의 급여가 계란의 난 품질에 미치는 영향에서 난각 강도, 난각 두께, 난백고 및 호유닛은 대조구와 차이가 없었다. 하지만 난황의 색도는 스테비아 부산물의 급여수준이 증가할수록 높은 수치를 보여 스테비아 4%와 8% 급여구는 대조구에 비하여 유의적으로 증가하였다. 계란의 당 전이도 실험에서는 스테비아 부산물을 급여하여 생산된 계란과 대조구 사이에 차이가 없었으며 토코페롤의 함량은 스테비아 부산물 2%, 4% 급여구가 대조구에 비하여 유의적으로 증가하였다. 계란의 지방산 함량은 스테비아 부산물 2%와 4% 급여구가 포화지방산은 감소하였고, 단가 불포화 지방산은 유의적으로 증가하였다. (p>0.05)

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권2호
• /
• pp.62-69
• /
• 2003

그동안 고분자계열 약액에 비하여 상대적으로 독성이 약한 시멘트 계열 약액이 환경에 미치는 영향을 경미하게 다루어졌으나 최근 일본에서 시멘트계열 약액을 사용한 공사현장에서 발암물질인 6가 크롬의 용출로 일본 건설성에서는 이에 대한 규정을 발효하고 시행하여 엄격히 관리하고 있으나 우리나라에서는 상대적으로 이에 대한 연구가 부족한 실정이다 본 연구에서는 다양한 현장조건에서의 시멘트계 그라우트재에서의 6가 크롬 용출특성을 파악하기 위해, 현장 배합비를 기초로 하여 다양한 현장조건에 따른 용출실험을 통하여, 시멘트계 그라우트재의 6가 크롬 용출 특성을 파악하였다. 먼저 원재료인 시멘트의 6가 크롬 함유량 실험을 한 결과 보통 포틀랜트 시멘트에서 22.1 mg/kg으로 다른 재료에 비해 가장 많이 함유되어 있었으며, 호모겔 그리고 샌드겔에서의 용출실험 결과 폐기물 공정시험법에 의할 경우 규제기준인 1.5 kg/L를 대체적으로 만족하였으나, 토양오염공정시험법에 의할 경우 특히 보통 포틀랜트 시멘트가 4.85 mg/kg으로 ‘가’ 지역의 우려기준인 4 mg/kg보다 높은 값을 나타내었다. 모의 주입장치를 이용한 실험결과 물시멘트 비와 주입압이 증가함에 따라 몰드 밖으로 나오는 배출액 중의 6가 크롬의 용출량이 커지는 경향을 나타내었으며, 주입압이 4 이상일 경우 수질오염보전법상의 규정인 0.5 mg/L를 초과하여 검출되었다. 최근 pH4의 산성비 및 매립지의 산생성 단계에서 pH 5이하의 침출수에 의한 그라우트재에서의 6가 크롬의 용출특성을 알아보기 위한 pH에 따른 6가 크롬의 용출경향을 실험한 결과 강산성 및 강염기 상태에서 6가 크롬의 용출량이 급격히 증가하는 경향을 보여 그라우트재가 주입되는 환경에 따라 6가 크롬의 용출량이 증가할 수 있다는 것을 알 수 있었다. 또한 그라우트재가 해안 또는 매립지에 적용될 경우 해수와 침출수에 의한 강도의 변화를 살펴보기 위해 실험한 결과 초순수 중에서 양생 시켰을 때 보다 강도발현 현저히 저하되었으며, 시멘트 종에 따라서는 ‘보통포틀랜트 시멘트>마이크로 시멘트>슬래그’ 시멘트의 순으로 영향을 받는 것으로 나타났다. 이는 강도의 저하로 인한 오염물질의 누출 및 6가 크롬의 용출을 증가시킬 수 있다는 것을 짐작할 수 있다. 이와 같은 결과를 통하여, 그라우트재의 종류에 따라 6가 크롬의 용출량은 현재 규제치를 초과하여 용출되어 질 수 있는 가능성이 있으며, 과압 또는 과량의 주입이 6가 크롬의 용출량을 증가시킬 수 있다고 할 수 있었다. 또한 일반 현장과 다른 특수한 현장에서는 강도 및 pH에 따른 6가 크롬의 용출량을 고려한 재료 선택 및 배합비가 마련되어져야 할 것으로 판단되어진다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2003년도 춘계 학술발표대회
• /
• pp.61-62
• /
• 2003

Clonal propagation of high-value forest trees through somatic embryogenesis (SE) has the potential to rapidly capture the benefits of breeding or genetic engineering programs and to improve raw material uniformity and quality. A major barrier to the commercialization of this technology is the low quality of the resulting embryos. Several factors limit commercialization of SE for Corsican pine, including low initiation rates, low culture survival, culture decline causing low or no embryo production, and inability of somatic embryos to fully mature, resulting in low germination and reduced vigour of somatic seedlings. The objective was to develop a Corsican pine maturation medium that would produce cotyledonary embryos capable of germination. Treatments were arranged in a completely randomized design. Data were analyzed by analysis of variance, and significant differences between treatments determined by multiple range test at P=0.05. Corsican pine (Pinus nigra var. maritima) cultures were initiated on modified !P6 medium. Modifications of the same media were used for culture multiplication and maintenance. Embryogenic cultures were maintained on the same medium semi solidified with 2.5 g/l Gelrite. A maturation medium, capable of promoting the development of Corsican pine somatic embryos that can germinate, is a combination of iP6 modified salts, 2% maltose, 13% polyethylene glycol (PEG), 5 mg!l abscisic acid (ABA), and 2.5 g/l Gelrite. After initiation and once enough tissue developed they were grown in liquid medium. Embryogenic cell suspensions were established by adding 0.951.05 g of 10- to 14-day-old semisolid-grown embryogenic tissue to 9 ml of liquid maintenance media in a 250ml Erlenmeyer flask. Cultures were then incubated in the dark at 2022$^{\circ}$C and rotated at 120 rpm. After 2.53 months on maturation medium, somatic embryos were selected that exhibited normal embryo shape. Ten embryos were placed horizontally on 20 ml of either germination medium ($\frac{2}{1}$strength Murashige and Skoog (1962) salts with 2.5 g/l activated charcoal) or same medium with copper sulphate adjusted to 0.25 mg/1 to compensate for copper adsorption by activated carbon. 2% and 4% maltose was substituted by 7.5% and 13% PEG respectively to improve the yield of the embryos. Substitution of' maltose with PEG was clearly beneficial to embryo development. When 2% of the maltose was replaced with 7.5% PEG, many embryos developed to large bullet-shaped embryos. At latter stages of development most embryos callused and stopped development. A few short, barrel-shaped cotyledonary embryos formed that were covered by callus on the sides and base. When 4% of the maltose was removed and substituted with 13% PEG, the embryos developed further, emerging from the callus and increasing yield slightly. Microscopic examination of the cultures showed differing morphologies, varying from mostly single cells or clumps to well-formed somatic embryos that resembled early zygotic embryos only liquid cultures with organized early-stag. A procedure for converting and acclimating germinants to growth in soil and greenhouse conditions is also tested. Seedling conversion and growth were highly related to the quality of the germinant at the time of planting. Germinants with larger shoots, longer, straighter hypocotyls and longer roots performed best. When mature zygotic embryos germinate the root emerges, before or coincident with the shoot. In contrast, somatic embryos germinate in reverse sequence, with the cotyledons greening first, then shoot emergence and then, much later, if at all, the appearance of the root. Somatic seedlings, produced from the maturation medium, showed 100% survival when planted in a field setting. Somatic seedlings showed normal yearly growth relative to standard seedlings from natural seed.

• Journal of the Korean Wood Science and Technology
• /
• 제9권3호
• /
• pp.7-15
• /
• 1981

우리나라에 대량조림(大量造林)되어 있는 일본잎갈나무는 기계(機械)펄프의 수율(收率)과 백색도(白色度)가 낮아 펄프재(材)로 이용(利用)되지 못하고 있다. 일본잎갈나무의 펄프재(材) 자원화(資源化)와 해예동력(解穢動力) 절약(節約)을 위하여 제지용 Asplund 펄프제조(製造)에서 셀롤로오스 안정제(安定劑)로서 $MgSO_4$, $ZnSO_4$, $Al_2(SO_4)_3$, KI을 택하고 고농도(高濃度) 과산화수소표백(過酸化水素漂白)과 과초산표백(過酢酸漂白)에서 그의 효과(效果)를 조사(調査)하고, ��의 알카리전처리(前處理)와 셀룰로오스안정제(安定劑)를 첨가(添加)한 알카리 전처리가 Asplund 펄프의 기존과산화수소표백(旣存過酸化水素漂白)에 미치는 영향(影響)을 조사(調査)한 결과(結果) 다음과 같이 요약(要約)된다. 1. 0.5%의 셀룰로오스안정제(安定劑)는 염기(塩基)의 종류(種類)에 따라 PH가 다르고($MgSO_4$=PH 5.72, $ZnSO_4$=PH 4.95, $Al_2(SO_4)_3$=pH 2.85), PH에 따라 침전 PH 범위($MgSO_4$=PH6~13, $ZnSO_4$=PH5~12, $Al_2(SO_4)_3$=PH3~10)와 최대(最大)침전 PH($MgSO_4$=PH9~10, $ZnSO_4$=PH6~7, $Al_2(SO_4)_3$=PH3~4)가 달랐다. 2. 일본잎갈나무 Asplund펄프의 고온고농도(高溫高濃度) 과산화수소(過酸化水素) 및 과초산표백(過酢酸漂白)에서 유효(有效)한 셀룰로오스안정제(安定劑)로는 KI, $MgSO_4$, $ZnSO_4$였으나 그의 효과(效果)는 미미하였다. 3. ��의 알카리전처리는 무처리보다 기존과산화수소표백(過酸化水素漂白)에 효과적(效果的)이었으며, 펄프의 강도(强度)와 백색도(白色度)를 향상(向上)시켰으나 수율(收率)은 저하(低下)시켰다. 그러나 셀룰로오스안정제(安定劑) 첨가(添加)는 황산염(黃酸塩)으로 인한 PH저하(低下)를 초래하여 탄산(炭酸)소다 전처리수준(水準)이었으며 ��의 알카리전처리에 첨가(添加)한 셀룰로오스안정제중(安定劑中)에서 해섬후(解纖後)의 과산화수소표백(過酸化水素漂白)에 유효한(有效)한 ��은 $ZnSO_4$, $Al_2(SO_4)_3$와 KI였다. 4. 따라서 산화조건에 효과적(效果的)인 안정제(安定劑)는 KI, $MgSO_4$이나 환원조건에서는 착염(錯塩)인 Zn, Al 염(塩)과 KI가 효과적(效果的)인 것으로 생각된다.

• 한국식품과학회지
• /
• 제53권3호
• /
• pp.278-289
• /
• 2021

본 연구는 인지기능 개선에 도움이 되는 천연기능성소재를 선발하기 위해 체계적 문헌고찰을 실시하였다. 2020년 10월 06일 기준 문헌검색을 통해 16,184건을 수집하였고 선택 및 배제 기준에 따라 총 27건의 문헌을 선별하였다. 27건 중 ω-3 지방산 관련 논문 12건, 비타민 B군 관련 논문 8건, 비타민 D와 E 관련 논문 각각 1건이었으며, 안세린/카르노신, 베테인, 카페인, 크로뮴, 피소스티그민 관련 논문이 각각 1건이었다. 각 문헌의 비뚤림 위험 평가를 진행한 결과 ω-3 지방산 관련 논문 2건, 비타민 B군 관련 논문 1건, 베테인, 카페인, 피소스티그민 관련 논문의 비뚤림 위험이 '높음'으로 평가되었고, 비뚤림 위험이 높다고 평가된 6건의 논문들을 제외하고 근거수준평가 및 결과분석을 시행하였다. ω-3 지방산 관련 논문은 6-24개월동안 DHA 0.48-2.2 g, EPA 203-720 mg의 용량을 함께 또는 따로 중재하여 총 1,031명의 대상자 중 437명의 유의적인 효과를 확인하였다. 경도인지장애 환자를 대상으로 진행된 ω-3 지방산 논문에서는 인지기능영역(공간력, 기억력, 회상력, 언어력)과 인지기능 관련 바이오마커(Aβ-42, APP mRNA)를 개선시키는 등 치매개선에 긍정적인 효과를 나타냈다. 그러나 치매 환자를 대상으로 한 ω-3 지방산 연구에서는 인지기능평가에 대한 개선효과를 확인하기 어려웠다. 비타민 B 관련 논문은 6 또는 24개월 동안 엽산 400-800 ㎍, 비타민 B₁₂ 25-500 ㎍, 비타민 B₆ 20 mg의 용량을 함께 또는 따로 중재하여 총 1,180명의 대상자 중 530명에서 유의적인 효과를 확인하였다. 비타민 B군의 섭취는 치매 위험성과 관련된 혈중 호모시스테인 농도를 감소시켰으며, 혈중 ω-3 지방산의 농도와 높은 상관관계를 나타내는 것을 확인할 수 있었다. 그 외에 비타민 D와 E는 인지기능관련 바이오마커(Aβ-42, APP mRNA, PS1 mRNA)를 감소시키고 인지기능평가(WAIS-RC, ADAS-cog) 개선효과를 나타냈으며 안세린/카르노신은 치매척도검사를 개선하였고 크로뮴 섭취는 기억력 부분의 인지기능영역을 유의적으로 개선하였다. 그러나 ω-3 지방산과 비타민 B를 제외한 연구들은 선별된 문헌의 개수가 제한적이며, 개선 효과를 판단할 근거가 부족하였다. 중재 기간 및 용량에 따라 결과를 종합하면, ω-3 지방산은 6개월 이상 DHA 0.48-2.2 g, EPA 203-720 mg의 용량을 복합 또는 DHA 단독으로 중재했을 경우 인지기능 개선 효과를 확인할 수 있었으며, 엽산 400-800 ㎍, 비타민 B₁₂ 25-500 ㎍, 비타민 B₆ 20 mg의 용량을 복합 또는 엽산을 단독으로 6개월 이상 중재할 경우 혈중 호모시스테인 농도 감소와 인지능력개선을 확인할 수 있었다.

• 유기물자원화
• /
• 제31권3호
• /
• pp.15-25
• /
• 2023

본 연구에서는 반도체 패키지 다이싱 공정에서 발생하는 실리콘 슬러지를 재활용하여 실리카 나노입자를 제조하였으며 이를 전기감응형 스마트유체의 분산 물질로 적용하였다. 상세히는, 실리콘 슬러지에 산처리를 통해 금속불순물을 제거한 고순도의 실리콘 분말을 얻고, 수열합성법을 통해 실리카 나노입자를 합성하였다. 실리카 나노입자의 크기를 조절하기 위해 수열합성법의 반응시간을 8, 15, 20, 30시간으로 진행하였으며, 반응시간이 증가할수록 실리카 나노입자의 크기가 증가하였다. 수열합성의 반응시간이 길어질수록 실리콘의 가수화 및 탈수 반응이 증가하며 입자의 크기를 증가시킨다. 실리콘 슬러지에서 제조한 실리카 나노입자를 실리콘 오일에 분산하여 전기감응형 스마트유체로 응용하였다. 그 결과, 30시간의 수열합성으로 제조된 실리카 나노입자가 동일한 전기장 하에서 21.4Pa의 가장 높은 전단응력을 나타내었다. 이는 큰 실리카 나노입자의 사이에 작은 입자들이 배치되는 보강효과 효과를 통해 단단한 사슬구조의 형성 때문이다. 본 연구를 통해 반도체 다이싱 공정에서 발생하는 실리콘 슬러지를 성공적으로 재활용하여 실리카 나노입자를 제조하였고, 이를 전기감응형 스마트유체에 적용함으로써 산업현장에서 친환경성을 강조하는 ESG 경영의 일환으로 적용될 수 있음을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.