• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.1043-1047
• /
• 2009

Three experiments were conducted to determine the conversion rate of formic and acetic acids into methane in the gastrointestinal tracts of geese. In experiment I, two sets of two 4-month-old male White Roman geese were allocated to one of two treatment groups. Each set of geese was inoculated either with formic acid or with phosphate buffer solution (PBS). After the acid or the PBS was inoculated into the esophagi of the geese, two birds from each treatment were placed in a respiratory chamber as a measurement unit for 4 h in order to determine methane production rate. In experiment II and III, 6- and 7-wk-old male White Roman goslings were used, respectively. Birds were allocated to receive either formic acid or PBS solution injected into the ceca in experiment II. Acetic acid or PBS solution injected into the cecum were used for experiment III. After either the acids or the PBS solution were injected into the cecum, two birds from each treatment were placed in a respiratory chamber as a measurement unit for 3 h; each treatment was repeated 3 times. The results indicated that formic acid inoculated into the oesophagi of geese was quickly converted into methane. Compared with the PBS-injected group, methane production increased by 5.02 times in the formic acid injected group (4.32 vs. 0.86 mg/kg BW/d; p<0.05). Acetic acid injected into the ceca did not increase methane production; conversely, it tended to decrease methane production. The present study suggests that formic acid may be converted to methane in the ceca, and that acetic acid may not be a precursor of methane in the ceca of geese.

• Journal of Veterinary Clinics
• /
• v.20 no.3
• /
• pp.323-327
• /
• 2003

This study has been conducted to compare the efficacy of sodium carboxymethylcellulose (SCMC) and hyaluronic acid (HA) on prevention of adhesion after artificial wound was induced in intestine. 1 % SCMC and 0.3% HA solution and saline solution were respectively administered to abdominal cavity. Each of the three groups consists of 11 rats. The abdominal cavity of each rat was coated with 2 ml of the allocated solution just after the abdomen was cut open, and it was coated with each solution of 1 ml before abrasion were caused on the cecum, the ascending colon and the transverse colon. Then, an additional 1 ml solution was injected before the abdomen was closed. On day 14 after the operation, each adhesion formation was evaluated at the score of 0-4. The HA group and SCMC group showed significantly lower adhesion scores than control group in all regions(P< 0.05). The adhesion scores of ascending colon, transverse colon and no abrasion region of the viscera showed little difference between HA group and SCMC group(P< 0.05), but the effect of adhesion reduction showed higher tendency in the HA group than the SCMC. The adhesion score of the cecum was significantly lower in HA group than SCMC group(P< 0.05). In conclusion, the SCMC solution and HA solution were effective on prevention of abdominal adhesion resulting from the celiotomy. Among of them, the HA solution could be more effective on prevention of adhesion than SCMC solution.

• Journal of the Korean Chemical Society
• /
• v.39 no.3
• /
• pp.213-217
• /
• 1995

Infrared Spectra of aqueous solution of BUDDA(Butyldithiodiacetic acid), BMDDA(Benzmethyldithiodiacetic acid), and CHDDA(Cyclohexyldithiodiacetic acid) are reported at various pH values. On the basis of the antisymmetric stretching bands of the ionized and un-ionized carboxyl group, the structures of the free-ligand are inferred. An approach to the study of these structures are compared with the results of potentiometric titration curve and IR Spectra studies.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.23 no.1
• /
• pp.183-186
• /
• 2011

The various molecular weight (MW) regenerated silk fibroins were prepared with different dissolution condition and the effect of MW on the gelation behavior of regenerated aqueous silk fibroin (SF) solution was investigated. The result of gelation time measurement indicated that the gelation of SF aqueous solution was accelerated by the increase of MW and SF concentration. When formic acid was added in SF aqueous solution, the gelation time of SFL and SFC30 aqueous solution showed a significant decreaseat 0.03% formic acid addition. In case of the lowest MW sample, SFC180, SF molecules became aggregated and precipitated without gelation after 28 days storage time. These findings indicate that MW control of SF can be utilized to control the gelation time of SF aqueous solution.

• Journal of the Korean Ceramic Society
• /
• v.25 no.1
• /
• pp.66-72
• /
• 1988

The effect of salts on the formation of ${\alpha}$-hemihydrated gypsum at boiling temperature under atmospheric pressure was studied by the solubility measurement method, and the formation of ${\alpha}$-hemihydrated gypsum from by-product gypsum of phosphoric acid process in the salts solution were investigated. The order of catalytic effect of salt on the formation of ${\alpha}$-hemihydrated gypsum are as follows: NH4Cl>NaCl>NaNO3. In the salts solution of sodium nitrate, sodium chloride, and ammonium chloride, prismatic ${\alpha}$-hemihydrated gypsum was obtained and the crystal form was converted to needle form in complex solution with sulfuric acid. The P2O5 content in gypsum was largely decreased in this atmosphoric solution process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.11
• /
• pp.1624-1628
• /
• 2015

Rigorously standardized laboratory protocols are essential for meaningful comparison of data from multiple sites. Considering that interactions of minerals with organic matrices may vary depending on the material nature, there could be peculiar demands for each material with respect to digestion procedure. Acid digestion procedures were evaluated using different nitric to perchloric acid ratios and one- or two-step digestion to estimate the concentration of calcium, phosphorus, magnesium, and zinc in samples of carcass, bone, excreta, concentrate, forage, and feces. Six procedures were evaluated: ratio of nitric to perchloric acid at 2:1, 3:1, and 4:1 v/v in a one- or two-step digestion. There were no direct or interaction effects (p>0.01) of nitric to perchloric acid ratio or number of digestion steps on magnesium and zinc contents. Calcium and phosphorus contents presented a significant (p<0.01) interaction between sample type and nitric to perchloric acid ratio. Digestion solution of 2:1 v/v provided greater (p<0.01) recovery of calcium and phosphorus from bone samples than 3:1 and 4:1 v/v ratio. Different acid ratios did not affect (p>0.01) calcium or phosphorus contents in carcass, excreta, concentrate, forage, and feces. Number of digestion steps did not affect mineral content (p>0.01). Estimated concentration of calcium, phosphorus, magnesium, and zinc in carcass, excreta, concentrated, forage, and feces samples can be performed using digestion solution of nitric to perchloric acid 4:1 v/v in a one-step digestion. However, samples of bones demand a stronger digestion solution to analyze the mineral contents, which is represented by an increased proportion of perchloric acid, being recommended a digestion solution of nitric to perchloric acid 2:1 v/v in a one-step digestion.

• Resources Recycling
• /
• v.11 no.3
• /
• pp.10-16
• /
• 2002

In the leaching of $LiCoO_2$with a strong acid such as sulfuric and nitric acid, an additional step was needed to recover cobalt and lithium separately from spent lithium ion batteries (LIBs). The leaching of $LiCoO_2$in an oxalic acid solution was investigated to recover cobalt selectively using a low solubility of cobalt oxalate at low pH. Leaching efficiency of 95% of lithium and less than 1% of cobalt were obtained when pure $LiCoO_2$powder was leached in 3M oxalic acid at $80^{\circ}C$ and 50 g/L pulpdensity. Under the above leaching conditions, complete dissolution of lithium was accomplished with mere 0.25% of cobalt in the solution when the cathodic active material collected from spent LIBs was employed. The lithium in the leaching solution can be recovered as a form of carbonate or hydroxide depending on the addition of $Na_2$$CO_3$or LiOH.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.4
• /
• pp.231-236
• /
• 2017

The present work addresses how to measure the amount of dissolved aluminum in phosphoric acid, based on volumetric and gravimetric measurements of the precipitates formed by reaction between the $H_3PO_4$ solution containing dissolved aluminum ions and 10 % KF solution. The volume of the precipitates increased with dilution of the dissolved aluminum-containing $H_3PO_4$ solution up to 1/4 dilution above which it decreased with further dilution. The lowered amounts of the precipitates at low dilution less than 1/4 and high dilution more than 1/4 are attributed to high acidity of the solution and decreased amount of dissolved aluminum in the solution, respectively. Volumetric measurement of the amount of precipitates was found not to be very reliable with the experiments, while weight measurement of the precipitates after drying for 80 min at $60^{\circ}C$ appeared to be very reproducible. In the present work, it is suggested that the amount of Al dissolved in 85 % $H_3PO_4$ solution can be calculated by multiplying 50 to the weight of precipitate obtained by reacting 8 ml of 1/4 diluted $H_3PO_4$ solution containing dissolved aluminum ions with 6 ml of 10 % KF solution.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.5
• /
• pp.947-953
• /
• 2010

Objectives : The purpose of this investigation was to evaluate the remineralization and acid resistance in fluoride varnish by Micro-computed tomography (micro CT). Methods : Specimens of bovine teeth enamel were embedded in resin, polished and randomly divided into 3 groups (a control group, a NaF solution group, a fluoride varnish group). Each group has 3 specimens that was standardized according to Vickers hardness number (VHN). Specimens were immersed in demineralization solution for 72 hours. The control group had no treatment, the NaF solution group was treated by a 5% NaF solution for 4 minutes, and the fluoride varnish group was treated by a fluoride varnish for one hour. All specimens were subjected to a chemical pH cycling method for 14 days. After a chemical pH cycling method, the density were measured using micro CT. Then, specimens were immersed in each demineralization solution for 72 hours. After demineralization processed, the density were measured using micro CT. Results : 1. The density was significantly higher in the fluoride varnish and 5% NaF solution group than that of the control group after 14 days cycling (p<0.05). And the density value of the fluoride varnish group was higher than that of the 5% NaF solution, with no significant difference. 2. The differences of density after acid resistance treatment were statistically significant among 3 groups(p<0.05). Conclusions : It is suggested that fluoride varnish showed the remineralizing effect and acid resistance effect on the enamel, and micro CT could be used to evaluate the change of enamel lesion.

• Journal of Plant Biotechnology
• /
• v.48 no.2
• /
• pp.77-85
• /
• 2021

Hydroponic cultivation, in which crops are grown without soil and are unaffected by the weather, has many advantages over conventional soil cultivation. The crop's growth can be further accelerated by using nutrient solution in place of water. This study investigated the growth and physicochemical properties of hydroponic barley sprouts under various nutrient solution and artificial light treatments. The shoot, root, and total plant length increased over time, with the fastest growth occurring in the nutrient solution and light-emitting diode (LED) treatments. Fresh and dry plant weights were higher in the fluorescent lamp treatment than in the LED treatment. Barley sprout powder color differed slightly by treatment, with the Hunters L value ranging from 50.79 to 53.77; Hunters a value from -6.70 to -4.42; and Hunters b value from 13.35 to 14.76. The Hunters L and Hunters b values were highest in the LED treatment, whereas the Hunters a value was relatively highest in the fluorescent lamp treatment. The total phenol content was higher in the control than in the nutrient solution treatment; however, the total flavonoid content showed the opposite pattern to that of total phenol content, being highest in plants that were grown in nutrient solution. The Trolox equivalent antioxidant capacity (TEAC) was higher in the control group than in the nutrient solution group. The ferric ion reducing antioxidant power (FRAP) was higher in the fluorescent treatment group than in the LED treatment group. The total amino acid composition ranged from 106.82 to 122.63 mg/g dry powder, with the essential amino acid composition ranging from 47.01 to 56.19 mg/g, and non-essential amino acid composition from 67.86 to 77.66 mg/g. The most frequently detected compositional amino acid was aspartic acid, followed by glutamic acid, alanine, leucine, and valine.