• The Korean Journal of Pharmacology
• /
• v.5 no.1
• /
• pp.17-22
• /
• 1969

Oxygen consumption by Clonorchis sinensis (C.S.) was observed in a medium of valuable pH of KRP, lack of certain electrolytes of KRP and of glucose, acetic acid or propionic acid was added to KRP. The results were as follows. 1. In a different solutions, KRP with or without $0.4%-glucose$, $0.9%-saline$ solution, the variation of oxygen consumption by C.S. was not significant. 2. Oxygen consumption by C.S. was inhibited by the solution of KCI, $CaCl_2$, or $MgSO_4$ in a 0.9% solution of saline. 3. Under the acidity, oxygen consumption was enhanced but under the alkality, it was inhibited. 4. Oxygen consumption by C.S. was inhibited by acetic acid or propionic acid in KRP solution. 5. C.S. keeping in KRP solution for a long duration, oxygen cosumption was reduced in the course of time.

• YAKHAK HOEJI
• /
• v.29 no.5
• /
• pp.234-245
• /
• 1985

To clarify the diffusional behavior of p-aminbenzoic acid esters in the presence of polyethylene glycol 400, cellulose membrane permeation rate, solubility and viscosity of p-aminobenzoic acid methyl ester, benzocaine and butamben were determined with PEG solutions of various concentrations. With an increase in PEG concentrations permeation rates from solutions; decreased due to an increase in viscosity of the solution. From suspensions, however, permeation rates increased due to an increase in solubility and when the initial drug concentration was constant, permeation rates were found to be greatest from the PEG-water system with the PEG concentration which transported from the solution to the suspension. Permeation rate of 4.0mg/ml p-aminobenzoic acid methyl ester was $26.51\mu$g/ml$\cdot$hr from 5g/100ml PEG solution, and that of 4.0mg/ml benzocaine was $13.17{\mu}g/ml{\cdot}hr$ from 15g/100ml PEG, solution, and that of 2.0mg/ml butamben was $3.8{\mu}g/ml{\cdot}hr$ from 10g/100ml PEG solution. Permeation rate was 7.0 fold in p-aminobenzoic acid methyl, ester and 3.5 fold in benzocaine compared to butamben.

• The Journal of the Korean dental association
• /
• v.12 no.5
• /
• pp.327-332
• /
• 1974

The effects of enamel solubility by the varying concentration of fluoride and phosphate as well as pH of the acid fluoride-phosphate solutions were tested and compared with th 7% stannous fluoride solution. The smooth surface of the sound permanent 1st premolars were demineralized by the Buttner's method. And the phosphorus extracted from the 1st premolars were analyzed by the Fiske and Subbarow's method. Enamel smooth surfaces treated with the acid fluoride-phosphate solution and the 8% stannous fluoride solution were obserbed electron-microscopically by the Filmy Replica method. The results of this study were summarized as follows: !. The least enamel dissolution rate was observed at the acid fluoride-phosphate solution contained 1.25% fluorine, 0.5% phosphate, and pH 4. 2. The anti-cariogenic effects comparison between the acid fluoride-phosphate solution and 8% stannous fluoride, the former was higher.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.83-86
• /
• 1999

The imidization effect of a poly (amic acid) dope solution on membrane formation has been investigated. Poly (amic acid) solution in S-methyl-2-pyrrolidione hs been thermally imidized at $120^{\circ}C$ with different curing time and its degree of imidization was determined by infrared spectroscopy. The solution properties have been studied as a function of concentration and curing time by dynamic light scattering. The quality of a solvent was changed from good to poor with increasing imidization of poly(amic acid).The reduced polymer-solvent interaction diminishes the membrane formation time. The morphology of a membrane was able to be controlled by the characteristics of dope solution.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3352-3358
• /
• 2021

Aiming at selective adsorption and separation of Y(III) from the Y(III)-Sr(II) group in acid solution, a silica-based TODGA impregnated adsorbent [(TODGA+1-dodecanol)/SiO₂-P-F600] has been prepared. Batch adsorption experiments were conducted under the effect of contact time, acid concentration, solution temperature, and adsorption capacity etc. Chromatography recovery of more than 90% Y(III) was successfully achieved under elution with 0.01 M DTPA solution in nitric acid adsorption system, and 0.1 M HCl solution in hydrochloride adsorption system, respectively.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.268-275
• /
• 2019

In this study, silk fabrics was dyed with sappan wood extracts fermented for 5 and 15 days, respectively, and then the dyeability, durability and the functionality of the dyed silk were investigated. Before dyeing, the silk was pretreated with chitosan-acetic acid solution or chitosan acetic acid and illite blend solution. Thereafter, UV-Visible transmittance, color, fastness, antimicrobial activity, and the FIR emissivity were analyzed. As a result, the K/S value was higher in the samples that were not pre-treated or fermented. Regardless of fermentation, the lightfastness was not significantly different. The color fastness to washing was slightly better when the samples were pretreated with chitosan-acetic acid and illite, and then dyed with extracts fermented 5 days. In addition, all samples showed high antimicrobial activity of 99.9%, regardless of the fermentation. Far-infrared emissivity was confirmed to be slightly increased by the illite and chitosan-acetic acid solution treatment compared to the untreated sample.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.60-67
• /
• 1995

This study was made to investigate the effect of silk fabrics treated with mimosa and tannic acid-weighting effect, surface color according to temprature, treatment time, concentration, pH. The results were as follows ; 1. The wavelength of maximum absorption of mimosa and tannic acid solution appeared at 278.5nm and 275.0nm, respectively. By the irradiation, spectra at wavelength of maximum absorption of mimosa solution disappeared, but those of tannic acid solution decreased after 48hr irradiation. 2. The tannin weighting increased with the increase of concentration, treatment temperature at 8$0^{\circ}C$, acidic condition. In case of tannic acid, it was higher than mimosa. 3. Surface color of silk fabric with mimosa changed from 2.8YR to 5.8YR acc-ording to the increase o( tannin concentration but in case of tannic acid itchanged from 4.2Y to 3.9Y. It was more changed acidic or alkaline conditionthan origine solution.

• Journal of the Korean Chemical Society
• /
• v.54 no.4
• /
• pp.479-486
• /
• 2010

The purposes of this study are to investigate the description of scientifically debatable carbonic acid in the Korean high school textbooks, characterize the physical properties of 'carbonic acid solutions' by using an MBL set-up and compare the properties with textual ones. Four different aqueous solutions of carbon dioxide have been prepared and analyzed: naturally aerated aqueous solution, dry ice-dissolving solution, $CO_2$-bubbling solution and commercial carbonic acid water. Experimental findings showed that pH and conductivity of these 4 solutions ranged from 3.85 to 5.66 and from 0.21 ${\mu}S$/cm to 272.1 ${\mu}S$/cm, respectively. Out of these solutions, the dissociation constant($K_{a1}$) of the bubbling solution at room temperature could be calculated to $5.7{\times}10^{-7}$ which value is comparable to the textual $4.3{\times}10^{-7}$ within experimental errors, which means that textual compound is not pure carbonic acid but the equilibrated mixture of carbonic acid and the aqueous solution of carbon dioxide. On the other hand, textual analysis showed that most of high school textbooks used carbonic acid as an example of weak acid and buffer solution of the blood but none of them distinguished the carbonic acid from the aqueous solution of carbon dioxide. Only one textbook, however, tiered two species in the chemical equation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.4
• /
• pp.524-535
• /
• 1994

The interaction and detergency between oily soil and surfactant solution were studied Samples used were tristearin, tripalmitin and their mixture as a triglyceride, myristic acid as a fatty acid and sodium dodecyl sulfate (SDS) as surfactant. The results were as follows: 1. The mixtures of model oily soils were formed of eutectic point and their melting point were lower than them of individual oily soils. 2. The formation of liquid crystalline (LC) phase was recognized in the triangle phase diagram for SDS~ water~model oily soil system. The areas of LC phase region were in the order of SHS~ water~myristir acid> SDS~ water~mixture of tristearin, tripalmitin and myristic acid (TS/TP/M)>SDS~water~mixture of tristearin and tripalmitin (TS/TP) 3. The LC phase region expanded to wide concentration range of SDS solution and high concentration range of model oily soil with increasing temperature. Particularity, the LC phase region expanded highly at $30~40^{\circ}C$ but when the temperature was elevated above $40^{\circ}C$, expanding tendency decreased. 4. In the system of myristic acid and TS/TP/M contacted with SDS solution, the LC phase was already formed at $28^{\circ}C$ and the region of the LC phase were expanded with increasing temperature. But in the system of TS/TP contacted with SDS solution, the LC phase was not formed in whole experiment temperature. 5. The detergency of myristic acid was very high ann it was recognized that the formation of the LC phase played an important role in the detergency. The detergency of TS/TP was very for low, but when TS/TF was mixed with myristic acid, the detergency of TS/TP increased. It is supposed that the LC phase was formed butween SDS solution and myristic acid promoted to penetration of SDS solution into the inner parts of TS/TP.

• Membrane Journal
• /
• v.23 no.1
• /
• pp.92-99
• /
• 2013

In this study the nanofiltration (NF) membrane treatment of a sulfuric acid waste solutions containing copper ion ($Cu^{+2}$) discharging from the etching processes of the printed circuit board (PCB) manufacturing industry has been studied for the recycling of acid etching solution. SelRO MPS-34 4040 NF membrane from Koch company was tested to obtain the basic NF data for recycling of etching solution and separation efficiency (total rejection) of copper ion. NF experiments were carried out with a dead-end membrane filtration laboratory system. The pure water flux was increased with the increasing storage time in sulfuric acid solution and lowering pH of acid solution because of the enhancement of NF membrane damage by sulfuric acid. The permeate flux of acid solution was decreased with the increasing copper ion concentration. Total rejection of copper ion was decreased with the increasing storage time in sulfuric acid solution and copper ion concentration, and lowering the pH of acid solution. The total rejection of copper ion was decreased from initial 37% to 15% minimum value.