• Journal of the Korean Wood Science and Technology
• /
• v.10 no.1
• /
• pp.5-37
• /
• 1982

Plywood used for construction as a decorative inner material is inflammable to bring large fire accidents and burn out human life and their properties. To diminish the fire disaster, fire retardant plywood has been required indeed. In the methods of manufacturing the fire retardant plywood the soaking method is occasionally used. However after soaking plywood into fire retardant chemical solutions, redrying of soaked plywood is the most important. In this study, 3.5mm thin and 5.0mm thick plywoods were selected for fire retardant treatment. Treating solutions were prepared for 20% dilute solutions of ammonium sulfate, monoammonium phosphate, diammonium phosphate, borax-boric acid and minalith, and water solution. 1-, 3-, 6-, and 9 hour-soaking treatments were applied and after treatments hot plate drying was applied to those treated plywoods at $90^{\circ}C$, $120^{\circ}C$ and $150^{\circ}C$, of press temperature. Drying rates, drying curves, water absorption rates of fire retardant chemicals, weight per volume and fire retardant degree of plywood were investigated. The results may be summarized as follows: 1. The plywoods treated with ammonium sulfate, monoammonium phosphate and diammonium phosphate and diammonium phosphate showed increase of chemical absorption rate with proportion to increase of treating time, but not in case of the plywood treated with borax-boric acid and minalith. 2. In the treatment of definite time, the absorption rate per unit of volume of plywood showed higher in thin plywood (thickness of 3.5mm) than in thick plywood (thickness of 5.0mm). In both thin and thick plywoods, the highest absorption rate was observed in 9 hour-treatment of ammonium sulfate. The value was 1.353kg/$(30cm)^3$ in thin plywood and 1.356kg/$(30cm)^3$ in thick plywood. 3. The volume per weight of plywood after chemical treatment increased remarkably and. after hot plate drying, the values were to a little extent higher than before chemical treatment. 4. The swelling rates of thickness in chemical-treated plywoods increased similarly with that of water-treated plywood in 1- and 3 hour-treatment of both thin and thick plywoods. But in 6- and 9 hour-treatment, the greater increased value showed in water-treated ply wood than any other chemical, especially in thick plywood. 5. The shrinkage rates after hot plate drying showed the same tendency as the swelling rate, and the rate showed the increasing tendency with proportion to increase of treating time in thick plywood of both chemical and water treatments. 6. Among drying curves, the curves of water-treated plywood placed more highly than chemical-treated plywood without-relation to thickness in 6- and 9 hour-treatment except in 1- and 3 hour-treatment. 7. The drying rate related to thickness of treated plywood, was twice above in thin plywood compared with thick plywood. 8. The drying rate remarkably increased with proportion to increase of the plate temperature and, the values were respectively 1.226%/min., 6.540%/min., 25.752%/min. in hot plate temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in thin plywood and 0.550%/min., 2.490%/min, 8.187%/min, in hot plate temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in thick plywood. 9. In the treatment at $120^{\circ}C$ of hot plate temperature, the drying rates of chemical-treated plywood showed the highest value in monoammonium phosphate of thin plywood and in diammonium phosphate of thick plywood. But the drying rate of water-treated plywood was highest in 6- and 9 hour-treatment. 10. The fire retardant degree of chemical-treated plywood was higher than that of the untreated plywood as shown in loss of weight, burning time, flame-exhausted time and carbonized area. 11. The fire-retardant effect among fire retardant chemicals were the greatest in diammonium phosphate, the next were in monoammonium phosphate and ammonium sulfate, and the weakest were in borax-boric and minalith.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.4
• /
• pp.276-283
• /
• 1997

This experiment was conducted to investigate the optimum temperature and the effects of sulfuric acid, flowing water and $GA_3$ on the germination of Bupleurum falcatum. At the same time, the effect of germination-related compounds in Bupleurum falcatum seed was tested. Among the tested temperatures $(15,\;20,\;25\;and\;30^{\circ}C)$ the highest germination rate was obtained at $15^{\circ}C$. The optimum soaking time of sulfuric acid was 5 minutes at the concentration of both 0.1 and 1.0%. At the same time, the germination rate was highest when Bupleurum falcatum seed was washed for 2 days in the flowing water before germination test. The effect of $GA_3$ on the germination was highest at 100 ppm out of 10, 50 and 100 ppm. Regardless of treatments, the germination rate of Jeongseon species was higher than that of Mishima species. SEM photographs revealed that most of germination-inhibiting substances in the seed coat were washed away by rinsing in the flowing water for 2 days thus the seed coat became more smooth. The 4, 000 ppm alcohol extract of Bupleurum falcatum seeds inhibited the germination of lettuce seeds as much as 41.7% in Jeongseon species and 58.3% in Mishima species. The higher extract concentration from seed of Bupleurum falcatum, the lower the germination of lettuce seeds was obtained. Out of phenolic acids, the contents of orchinol, pyrogallol, and p-hydroxybenzoic acid were highest in both varieties. Compared with Mishima species, Jeongseon species showed much higher content of salicylic and vanillic acid.

• Korean Journal of Plant Resources
• /
• v.9 no.2
• /
• pp.171-175
• /
• 1996

The objective of this study is to promote germination for mass cultivation of Adenophora triphylla. After the seed soaking for I day in BA and $GA_3$ solution, seed germination was effectively promoted in the treatment of 500mg/L $GA_3$ and the highest germination rate was 94%.The average germination days were 1.5days earlier than those of non-treated seeds. In a chemicals treatment, seed germination rate was 54% in 1% $KNO_3$ treatment but KOH treatment was no significantly effected. The durations of chilling treatment for breaking of dormancy were longer than 2weeks. The optimal temperature for germination was $25^{\circ}C$. The promotion of seed germination is presumed to be due to the breaking of dormancy by $GA_3$, chilling treatment rather than seed coat maceration by KOH or $KNO_3$ treatments.

• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.557-563
• /
• 2016

To improve the germination of Spiraea fritschiana seeds for mass propagation, we evaluated the effect of a range of temperatures, cold stratification periods, and gibberellic acid ($GA_3$) treatments on three germination characteristics. Final germination percentage (FGP) increased as the temperature for seed germination increased, up to $30^{\circ}C$, while the mean germination time (MGT) and the mean number of days to 30% germination ($T_{30}$) decreased when seeds were germinated at $25-30^{\circ}C$. The optimum germination temperature of S. fritschiana seeds is approximately $30^{\circ}C$ considering FGP, MGT, and $T_{30}$ together. FGP increased with the duration of cold stratification up to a period of 6 weeks, but declined after 8 weeks of cold stratification, as prolonged cold stratification can induce dormancy with a resultant decline in germination. Pretreatment with 6-8 weeks of cold stratification or soaking seeds in distilled water or $500mg{\cdot}L^{-1}$ $GA_3$ for 24 h accelerated and increased the germination of S. fritschiana seeds, regardless of temperature. However, further study might be required to evaluate the effect of $GA_3$ concentrations lower than $500mg{\cdot}L^{-1}$ on the promotion of germination in S. fritschiana seeds.

• Journal of Pharmacopuncture
• /
• v.16 no.1
• /
• pp.21-29
• /
• 2013

Objective: The study was carried out to evaluate the hepatoprotective and antioxidant potential of Ziziphus mucronata (ZM) fruit extract. Methods: The different types of fruit extract were prepared by soaking the dry powdered fruit in different solvents followed by rotary evaporation. Each extract was tested for its phenol content and antioxidant activities. An in vivo study was performed in Sprague-Dawley (SD) rats. Thirty adult male SD rats (aged 21 weeks) were divided into six groups of five rats each and treated as follows: The normal control (NC) received distilled water while the dimethoate control (DC) received 6 mg/kg.bw.day-1 dimethoate dissolved in distilled water. The experimental groups E1, E2, E3, and E0 received dimethoate (6 mg/kg.bw) + ZMFM (100 mg/kg.bw-1), dimethoate (6 mg/kg.bw) + ZMFM (200 mg/kg.bw-1), dimethoate (6 mg/kg.bw) + ZMFM (300 mg/kg.bw-1), and ZMFM (300 mg/kg.bw-1) only. Both the normal control and the dimethoate control groups were used to compare the results. After 90 days, rats were sacrificed, blood was collected for biochemical assays, and livers were harvested for histological study. Results: High phenol content was estimated, and 2, 2-diphenyl-1-picryl hydrazyl radical (DPPH) spectrophotometric, thin layer chromatography (TLC) and 2, 2-Azobis-3-ethyl benzothiazoline-6-sulphonic acid (ABTS) assays showed a high antioxidant activity among the extracts. The preventive effects observed in the E1, E2 and E3 groups proved that the extract could prevent dimethoate toxicity by maintaining normal reduced glutathione (GSH), vitamin C and E, superoxide dismutase, catalase, cholineasterase and lipid profiles. The preventive effect was observed to be dose dependent. The EO group showed no extract-induced toxicity. Histological observations agreed with the results obtained in the biochemical studies. Conclusion: The study demonstrated that ZM methanol fruit extract is capable of attenuating dimethoate-induced toxicity because of its high antioxidant activity.

• Journal of Pharmacopuncture
• /
• v.18 no.4
• /
• pp.12-19
• /
• 2015

Objectives: This study was done out to evaluate the effects of Sida rhombifolia methanol extract (SRM) on diabetes in moderately diabetic (MD) and severely diabetic (SD) Sprague-Dawley rats. Methods: SRM was prepared by soaking the powdered plant material in 70% methanol and rota evaporating the methanol from the extract. Effective hypoglycemic doses were established by performing oral glucose tolerance tests (OGTTs) in normal rats. Hourly effects of SRM on glucose were observed in the MD and the SD rats. Rats were grouped, five rats to a group, into normal control 1 (NC1), MD control 1 (MDC1), MD experimental 1 (MDE1), SD control 1 (SDC1), and SD experimental 1 (SDE1) groups. All rats in the control groups were administered 1 mL of distilled water (DW). The rats in the MDE1 and the SDE1 groups were administered SRM orally at 200 and 300 mg/kg body weight (BW), respectively, dissolved in 1 mL of DW. Blood was collected initially and at intervals of 1 hour for 6 hours to measure blood glucose. A similar experimental design was followed for the 30-day long-term trial. Finally, rats were sacrificed, and blood was collected to measure blood glucose, lipid profiles, thiobarbituric acid reactive substances (TBARS) and reduced glutathione (GSH). Results: OGTTs indicated that two doses (200 and 300 mg/kg BW) were effective hypoglycemic doses in normal rats. Both doses reduced glucose levels after 1 hour in the MDE1 and the SDE1 groups. A long-term trial of SRM in the MD group showed a reduced glucose level, a normal lipid profile, and normal GSH and TBARS levels. In SD rats, SRM had no statistically significant effects on these parameters. Normal weight was achieved in the MD rats, but the SD rats showed reduced BW. Conclusion: The study demonstrates that SRM has potential to alleviate the conditions of moderate diabetic, but not severe diabetes.

• Food Science and Preservation
• /
• v.7 no.2
• /
• pp.218-221
• /
• 2000

The effect of the amounts of kimchi (100, 200 and 300 g) and fermentation temperature (10, 15 and 20$^{\circ}C$) on gas formation of kimchi during fermentation were investigated. The pH of the 200 g packaged kimchi for 12 days at 10-15$^{\circ}C$ was higher than 100 g and 300 g packaged kimchi, whereas that of 100 g packaged kimchi at 20$^{\circ}C$ was higher than the other products. Total lactic acid bacteria in was highest in the 200-300 g packaged kimchi fermented for 12 days at 10$^{\circ}C$. Number of Leuconostoc mesenteroides and Lactobacillus plantarum of 200 g packaged kimchi higher with the lower fermentation temperature, and that of Lactobacillus plantarum was higher in the kimchi fermented at 15$^{\circ}C$. The periods of gas formation was 8-11 days of fermentation at 10$^{\circ}C$, 1-7 day at 15$^{\circ}C$, and 5-6 days at 20$^{\circ}C$, respectively. The order of gas formation amount in the temperature and amount of kimchi was 15 > 20 > 10$^{\circ}C$ and 300 > 200 > 100 g, respectively.

• Advanced Composite Materials
• /
• v.16 no.4
• /
• pp.299-314
• /
• 2007

In the present study, natural fibers (jute, kenaf and henequen) reinforced thermoplastic (poly(lactic acid) and polypropylene) and thermosetting (unsaturated polyester) matrix composites were well fabricated by a compression molding technique using all chopped natural fibers of about 10 mm long, respectively. Prior to green composite fabrication, natural fiber bundles were surface-treated with tap water by static soaking and dynamic ultrasonication methods, respectively. The interfacial shear strength, flexural properties, and dynamic mechanical properties of each green composite system were investigated by means of single fiber microbonding test, 3-point flexural test, and dynamic mechanical analysis, respectively. The result indicated that the properties of the polymeric resins were significantly improved by incorporating the natural fibers into the resin matrix and also the properties of untreated green composites were further improved by the water treatment done to the natural fibers used. Also, the property improvement of natural fiber-reinforced green composites strongly depended on the treatment method. The interfacial and mechanical results agreed with each other.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.3
• /
• pp.314-319
• /
• 1997

Sugars in Korean jujube fruit and jujube fruit drinks were studied. The sugars in Korean jujube fruit were extracted by boiling with water for 30min and stirring for 1 hour at 7$0^{\circ}C$ after soaking in the water for 24 hours at 4$^{\circ}C$ followed by crushing. Korean jujube fruit was found to contain 25% of sucrose, 21.2% of fructose and 20.7% of glucose. Korean jujube fruit drinks of V company and H company were found sugar composition of 5.9% and 6.9% of sucrose, 2.2% and 2.1% of fructose and 2.4% and 2.4% of glucose, respectively. No other mono- and oligosaccharides were detected in the test of TLC and HPLC. A viscous material in jujube fruit and jujube fruit drinks was separated by ethanol fractionation, and identified as pectin by 1H-NMR and carbazole analysis. Pectin of Korean jujube fruit, jujube drink of V company and jujube drink of H company was found to contain 61, 58 and 55% of galacturonic acid, respectively.

• Korean Journal of Plant Resources
• /
• v.22 no.3
• /
• pp.236-241
• /
• 2009

Dracocephalum argunense Fischer ex Link (Labiatae) is a perennial herbaceous plant used as valuable materials for ornamentals, honey production, and pharmaceutics. Since seed germination of this species was quite difficult, present studies were conducted to improve the germination rate by subjecting the seeds to various environmental conditions (temperature and light) and treatments (scarification, priming and seed coating). Optimum temperature for adequate germination was 20$^{\circ}C$ though it ranged from 15$^{\circ}C$ to 25$^{\circ}C$, and low temperature treatment improved germination rate. Light was required for higher germination rate in this species. The scarification of seeds resulted in much higher germination, especially by the physical treatment with sandpaper or chemical treatment with sulfuric acid for 30 seconds. Various primers with different concentrations were treated on the seeds and it was demonstrated that low temperature enhanced germination rate, regardless of kinds and concentrations of the primers. Three treatment combinations of the primers, 0.5 mM $GA_{3}$ treated for 48 hours, 0.5 mM IAA for 24 hours, and 1.0 mM IAA for 24 hours, increased the seed germination rate profoundly. Soaking treatment of inorganic salts, $KNO_{3}$ and $KH_{3}PO_{4}$, promoted germination when seeds were subjected to low temperature. Water soluble primers such as sucrose at 0.5 and 3% concentration and solid primer talc powder were effective in enhancing germination rate.