• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.259-263
• /
• 2001

There are several steps such as slicing, lapping, chemical etching and mechanical polishing in the silicon wafer production process. The chemical etching step is necessary to remove damaged layer caused In the slicing and lapping steps. The typical etching liquor is the acid mixture comprising nitric acid, acetic acid and hydrofluoric acid. At present, the waste acid is treated by a neutralization method with a high alkali cost and balky solid residue. A solvent extraction method is applicable to separate and recover each acid. Acetic acid is first separated from the waste liquor using 2-ethlyhexyl alcohols as an extractant. Then, nitric acid is recovered using TBP(Tri-butyl phosphate) as an extractant. Finally hydrofluoric acid is separated with the TBP solvent extraction. The expected recovered acids in this process are 2㏖/l acetic acid, 6㏖/1 nitric acid and 6㏖/l hydrofluoric acid. The yields of this process are almost 100% for acetic acid and nitric acid. On the other hand, it is important to recover and reuse the metal values contained in various industrial wastes in a viewpoint of environmental preservation. Most of industrial products are made through the processes to separate impurities in raw materials, solid and liquid wastes being necessarily discharged as industrial wastes. Chemical methods such as solvent extraction, ion exchange and membrane, and physical methods such as heavy media separation, magnetic separation and electrostatic separation are considered as the methods for separation and recovery of the metal values from the wastes. Some examples of the application of solvent extraction to the treatment of wastes such as Ni-Co alloy scrap, Sm-Co alloy scrap, fly ash and flue dust, and liquid wastes such as plating solution, the rinse solution, etching solution and pickling solution are introduced.

• 한국축산시설환경학회지
• /
• 제18권3호
• /
• pp.229-234
• /
• 2012

본 연구는 구제역 긴급행동 지침 (SOP)에서 제시한 화학적 처리가 양돈분뇨의 이화학적 성상에 미치는 영향을 알아보고 이에 따른 적절한 후처리 방법을 모색하기 위하여 수행한 것이다. 가축분뇨의 알칼리처리-산중화 및 산처리-알칼리 중화처리는 처리조건에 따라 다양한 이화학적 변화가 있었으며, 이에 대한 결과요약은 다음과 같다. 1. B4 처리구 (Citric Acid-Calcium Oxide)의 경우는 산처리 후 알칼리 중화처리 시에 응고현상이 발생하였다. 이는 구연산과 생석회의 투입으로 인한 물질 간 화학적 결합에 기인하는 것으로 사료된다. 2. 산처리-알칼리 중화 (B처리구)의 모든 처리구에서 EC가 약 50 mS/cm 전후까지 증가 하였으며, A4 처리구를 제외한 알칼리처리-산 중화 (A처리구)에서는 처리 후 원수의 EC 보다도 낮은 경향을 나타냈다. 3. $NH_4{^+}$-N의 농도는 산처리-알칼리 중화 (B처리구)에서 처리 후 거의 변화가 없는 반면, 알칼리처리-산 중화 (A처리구)에서는 급격히 감소하였다. 이는 암모니아의 탈기로 인한 기작으로 사료되며, 특히 CaO를 이용한 A1, A2 처리구에서 두드러지게 나타났다. 4. 알칼리처리-산 중화 및 산처리-알칼리 중화는 처리조건에 따라서 이화학적 변화의 양상이 다양하다. 적정 pH 수준을 위한 시약의 소요량 및 운영관리 면에서 볼 때, 병원성미생물 등으로 오염된 가축분뇨 화학적 전처리시에는 산처리-알칼리중화 (B처리구) 보다는 알칼리처리-산 중화 처리구 (A처리구) 적합 할 것으로 사료된다. 그러나 자원화, 정화처리 등 후처리방법의 선정은 각 농가 및 지역적 환경요소에 따라 다르므로 산 알칼리제제의 소요량에 따른 경제성 평가 및 처리목적 등에 대한 충분한 검토가 필요하다.

• Journal of Nutrition and Health
• /
• 제11권1호
• /
• pp.39-43
• /
• 1978

번데기의 식품용달개발(食品用達開發)을 위해 몇가지 실험(實驗)을 하여 다음과 같은 결과를 얻었다. 1. 번데기의 이취(異臭)는 지방분(脂肪分)의 추출(抽出)로 제거(除去)할 수 있었다. 그 최적조건(最適條件)은 끊는 n-hexane으로 1시간조리(時關處理)하는 것이었다. 2. 실온(室溫)으로 방치(放置)한 번데기의 일반세균수(一般細菌數)는 6일(日)까지는 현저한 증가(增加)를 보이지 않았으며 균수(藝數)$10^8$을 초과하지 않아도 부패(腐敗)하여 식용(食用)하기 어렵게 되었다. 3. 강화가공용(强化加工用)의 탈지(脫脂)번데기는 수분(水分) 1.3%, 조단백(組蛋白) 76.0%, 조지방(組脂肪) 0.8%, 조회분(組灰分) 4.8%의 조성(組成)을 가졌다. 4. 제취목적(除臭目的)으로 alkali 처리(處理)를 하였으나 별(別)로 효과(效果)를 인정할 수 없었다. 5. 번데기의 脂肪酸組成은 myristic acid 0.35%, palmitic acid 20.90%, palmitoleic acid 0.50%, stearic acid 7.11%, oleic acid 32.20%, linoleic acid 6.48%, linolenic acid 30.31%였다.

• 한국염색가공학회지
• /
• 제7권3호
• /
• pp.1-10
• /
• 1995

The optical behavior of coloring matter extracted from onion's coats, the depression effects of destruction, yellowing and W transmittance of silk treated with color solution of onion's coats color difference of silk fabrics dyed with acid dyes and drycleaning fastness of silk treated with color solution has been investigated. The results are as follows : 1) The coloring matter extracted from onion's coats by alkali-acid method appeared properties of aglycon type. 2) &{\lambda}_{max}&of color solution extracted by distilled water was found at 280 and 327nm. 3) The decrease of tensile strength and the elongation of the silk treated with color solution were depressed but those of untreated silk were increased by irradiation of UV light. 4) The yellowness index of silk treated with color solution showed a little change by irradiation. 5) The UV transmittance of silk treated with color solution was decreased as increasing concentration of color solution. 6) The color difference after dyeing with several acid dyes on treated and untreated silk fabrics showed remarkable changes. 7) Drycleaning fastness of silk treated by color solution was excellent.

• 한국대기환경학회지
• /
• 제22권4호
• /
• pp.431-439
• /
• 2006

Catalytic oxidation of benzene, toluene and xylene (BTX) using regenerated metal oxide catalysts (ZnO-CuO, NiO, $Fe_2O_3$, ZnO, CrO) were investigated in a fixed bed flow reactor to evaluate their feasibility for the purpose of removing volatile organic compounds (VOCs). Four kinds of pre-treatment methods such as gas (air and hydrogen), acid aqueous solution, alkali aqueous solution and cleaning agent were used to find out the optimal regeneration conditions. The physico-chemical properties of the used and regenerated catalysts were characterized by BET and TPR (Temperature Programmed Reduction). The used catalysts showed high conversion ratio and the catalytic ability of toluene oxidation was in the order of ZnO-CuO>$Fe_2O_3$>NiO>ZnO>CrO. We found that the acid aqueous pre-treatment (0.1 N HNO$_3$) was the best way to enhance the catalytic activity of $Fe_2O_3$. In addition, air and hydrogen gas treatment were optimal for NiO and ZnO-CuO catalysts, respectively. Furthermore, the decomposition of BTX depends on the type of a catalyst and a gas molecule.

• 한국잠사곤충학회지
• /
• 제42권1호
• /
• pp.31-35
• /
• 2000

When insoluble sericin was hydrolyzed by treatment of NaOH solution, the solubility was increased with higher treatment temperature and longer treatment time. Whereas it was decreased in addition of NaHSO$_3$. As the results of electrophoresis in sericin powder obtained by the NaOH treatment, a distinguishable band was not confirmed. Average degree of polymerizations(A.D.P.) of sericin hydrolyzed by NaOH solutions were about 19.6∼22.1 and average molecular weight(M.W.) were about 2,200∼2,500. The longer hydrolysis time increased the whiteness of sericin powder. As the results of amino acid analysis, the contents of Thr., Tyr., and Ser. were decreased in NaOH hydrolysis as compared to HCl hydrolysis. In DSC analysis, thermal deformation and pyrolysis peak located at near 230$\^{C}$ and 320$\^{C}$, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제33권6호통권134호
• /
• pp.79-86
• /
• 2005

아스펜 목재(Populus tremuloides, L.)를 Ceriporiopsis subvermispora로 1, 2, 4, 6주 동안 부후 처리한 후, 목재의 화학적 성상변화를 관찰하였으며, 부후목재로부터 리그닌(MWL)을 단리하여 Gel permeation chromatography (GPC) 분석과 nitrobenzene oxidation (NBO)을 실시하였다. 부후가 진행되면서 목재내 리그닌의 함량은 계속 감소하여 6주 후에는 미처리재와 비교하여 20%까지 감소하였다. 리그닌은 균주처리에 의하여 저분자화되어 알칼리에 쉽게 용출되는 것으로 예측된다. 부후목재의 전섬유소(Holocellulose) 함량은 미처리재와 비교하여 5~6% 정도 감소하였다. 부후 과정 동안 $\alpha$-셀룰로스의 함량은 커다란 변화가 관찰되지 않았으나, xylose의 함량은 대조구의 23.4%에서 6주후에는 18%까지 감소하였다. 아스펜 목재의 리그닌 분자량은 균주처리에 의해서 점차 감소되었다가 부후 6주 이후에는 안정화 단계에 접어드는 경향을 보였다. 단리한 리그닌의 NBO 분석 결과, NBO 분해산물의 수율은 대조구와 비교하여 6주처리 후에는 20% 가량 감소되었다. 특히, 부후 목재 리그닌에서 S-타입 유도체(syringaldehyde+syringic aicd)의 감소량이 두드러졌다. G-타입 유도체(vanillin+vanillic acid)의 수율은 부후가 진행되면서 약 20% 가량 증가되었는데, 이는 부후과정에서 리그닌 분해 효소에 의한 S-리그닌의 탈메톡실화 반응이 진행되었음을 암시한다. 결론적으로, C. subvermispora는 부후 과정동안 G-리그닌보다 S-리그닌을 더욱 선택적으로 분해하는 경향을 나타내었다.

• 한국미생물·생명공학회지
• /
• 제5권3호
• /
• pp.127-131
• /
• 1977

억새풀을 알칼리로 전처리한 다음 직접섬유소를 자화할 수 있는 세균을 배양하여 SCP생산의 최적조반을 검토하고 및 가지 결과를 얻었기에 보고하는 바이다. 1) 알칼리성 처열제로써 NaOH가 가장 우수하였으며 87.4% lignin을 제거하였고 이것을 기질로하여 균체를 배양하였을 때 수율이 높았다. 2) NaOH의 농도별로 그 효과를 검토하였을 때 4%의 농도가 가장 적당하였다. 3) 알칼리 처리후 중화시 중화제로서는 H$_3$PO$_4$가 균기수율에 가장 좋았다. 4) 경시적 배양시 균기수율은 60시간에서 가장 좋았고 배양액 1ml당 9.23mg의 건조체를 얻었으며 75.2%의 소화율을 나타내었다.

• 한국의상디자인학회지
• /
• 제5권3호
• /
• pp.1-6
• /
• 2003

The purpose of this study was to investigate the dyeability and color fastness of cotton and silk fabrics dyed with extract of Arrowroot leaf princeps. The experimental items were divided into the mordant treatment, component of fabric and kind of mordants. The experimental study was done by laundering, abrasion(dry/wet), perspiration(acid/alkali), light fastness, color difference by C.C.M system and K/S test. The summerized finding reulted from experiment and investigation are suggested as follows : In the C.C.M and K/S test on mordanting method and kind of fabric, that of silk and cotton was the most effective in the pre mordant treatment. In the C.C.M and K/S analysis on 5 mordants, that of silk and cotton was significantly improved when mordants was treatmented. Especially, that of Fe mordanting treatment was higher than Al, Cu, Cr and none. In color fastness on mordants, laundering, perspiration and abrasion fastness showed 4-5 grade but light fastness showed 1-3 grade.

• 대한가정학회지
• /
• 제42권12호
• /
• pp.69-76
• /
• 2004

The purpose of this study was to investigate the colorfastness of cotton and silk fabric dyed with extract of Lotus leaf princeps. The experimental items were classified into mordanting treatments, fabric components and kind of mordants. The experimental test was done by laundering, abrasion(dry/wet), perspiration(acid/alkali) , light fastness, color difference by C.C.M(computer color matching) system and K/S test. The summarized findings resulting from the experiment and investigation are as follows: In the C.C.M and K/S test on mordanting method and kind of fabrics, co-mordanting treatment method and protein fabric (silk) were the most effective. Especially, Fe mordanting treatment was higher than Al, Cu, Cr and none-mordanting. In colorfastness on the mordants, perspiration and laundering fastness showed high grade (4-5) but grades of perspiration(2-3/4) and light fastness(1-3) were low.