• Journal of Pharmaceutical Investigation
• /
• v.24 no.3
• /
• pp.109-113
• /
• 1994

Effects of various formulation factors using $L_8$ orthogonal arrays with the stability of doxorubicin hydrochloride injections(DHls) were investigated. The degradation of DHI may be occured by pH, temperature, light and metal ions. It is known that DHI should be stored on refrigerated condition of $4{\sim}8^{\circ}C$ because of its unstability on the room temperature. The employed factors were sodium chloride as isotonic solution, sodium bisulfite or sodium pyrosulfite as an antioxidant, disodium edetate as a chelating agent, methyl parahydroxybenzoate as a dissolution time shortening agent, and hydrochloric acid or citric acid as a pH adjusting agent at $22^{\circ}C$. From the results of $L_8$ orthogonal arrays, an optimal formula, including sodium chloride, disodium edetate, sodium bisulfite and hydrochloric acid, was obtained and the shelf-life of the formula was determined as 560 days approximately.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.300-309
• /
• 2010

Melamincyanurate(MC), as an non halogen flame retardant are used as the polymer and plastic materials. In this study, melamine and cyanuric acid were used for the synthesis of MC. The optimum condition of synthetic MC were controlled by different molar ratio of melamine to cyanuric acid. MC was modified by coupling reaction with four different agents. The influences of modified MC were based on the coupling agent types. Preparation methods are available to offer the prospect of improved morphology control deposit stability in polyol. The results reveal that glycidoxypropyltrimethoxysilane(GDS) has the best storage stability. The best properties were obtained with melamine and cyanuric acid from 1:1 molar ratio. Modification of MC through coupling agent can efficiently enhanced the deposit stability in polyol up to 30 %.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.460-465
• /
• 2004

Hydrofluoric acid has been used as a novel stripping agent for molybdenum(VI) after its extraction with Cyanex 301. In the extraction step, the effects of parameters such as type and initial concentration of acid, type of diluent, extractant concentration, metal concentration and temperature have been studied. In the stripping step, the effects of various stripping agents on stripping efficiency have been investigated. Hydrofluoric acid has been chosen as an effective stripping agent, and the effects of concentration of hydrofluoric acid, stripping time, volume of hydrofluoric acid and the number of stages of stripping have been studied. Molybdenum(VI) has been effectively separated from a large number of elements in binary mixtures, with a very high tolerance limit. Finally, the optimized method has been extended for the analysis of Mo(VI) in spent molybdenum catalysts.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2514-2518
• /
• 2010

A very simple synthetic route of a novel SATE prodrug type of 6'-fluoro-6'-methyl-5'-noradeonosine carbocyclic nucleoside phosphonic acid is described. The key fluorinated alcohol intermediate 7 was prepared from the epoxide intermediate 6a via selective ring-opening of epoxide. Coupling of 7 with $N^6$-bis-Boc-adenine under a Mitsunobu reaction followed by phosphonation and deprotection afforded the carbocyclic phosphonic acid. The chemical stability of the bis(SATE) derivative 13 was measured at neutral (pH 7.2) and slightly acidic (Milli-Q water, pH 5.5) pH. The antiviral activity test of the SATE prodrug 13 and its parent nucleoside phosphonic acid 11 were evaluated against HIV-1.

• Advances in materials Research
• /
• v.4 no.4
• /
• pp.207-214
• /
• 2015

It has been reported in the technical literature that orotic acid can be used in order to induce improved crystallization of biodegradable and biocompatible polymers like poly(L-lactic acid), polyhydroxybutyrate and poly(hydroxybutyrate-co-hydroxyhexaonat). The expected advantage of the changed crystalline structure is a reinforcing effect of the polymers. A lot of papers reported about the application of inorganic and organic agents for acceleration of heterogeneous nucleation. This study reports on an attempt to use orotic acid as appropriate non-toxic nucleating agent for improving mechanical properties of isotactic polypropylene. Special attention is given to demonstrate the effect of nucleation in a typical melt spinning process in order to improve the mechanical properties. The effects were demonstrated using rheology, thermal analysis and tensile testing.

• Journal of Applied Biological Chemistry
• /
• v.55 no.4
• /
• pp.247-252
• /
• 2012

This study examined the control effects of amino acid biochemical agent extracted from chicken feathers on Meloidogyne incognita for the purpose of developing an environmentally friendly nematicidal agent that can replace chemical control of root-knot nematodes (RKN). We investigated the lethal effects of J2 juveniles for 19 types of commercial amino acids. As a result, five kinds of amino acids (L-asparagine, L-aspartic acid, L-methionine, L-tyrosine, L-cysteine) showed mortality rate of more than 50% at a concentration of 50 mM. L-asparagine showed the highest mortality rate at 94%. We also investigated the lethal effect of J2 juveniles and suppressive effects of egg hatching by feather amino acids (FAA) biochemical agent. It showed that the mortality rate of J2 juveniles was more than 80% and suppression rate of egg hatching was 74% at 1/50 concentrations of FAA. As a result of conducting a tomato pot culture experiment for 60 days after treating 1/50 concentrations of FAA biochemical agent in rhizosphere soil, it showed that the control effects were 63% of juveniles density in the soil, 59% of egg mass and 61% of root gall index, respectively. Based on the above results, it is considered that the FAA biochemical agent extracted from chicken feathers can be used as an environmentally friendly nematicidal agent of RKN.

• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.569-576
• /
• 2002

This study was peformed to evaluate the interfacial shear bond strength of base (direct and indirect) and repair composites with aging and surface treatment methods. Direct composite resin specimens ($Charisma^{\circledR}$, Heraeus Kulzer, Germany) were aged for 5 min, 1 hour, 24 hours, and 1 week in $37^{\circ}C$ distilled water before surface treatment, and then divided into five groups Group 1, grinding; Group 2, grinding and application of bonding agent, Group 3, grinding, etching with 37% phosphoric acid for 30sec, and application of bonding agent, Group 4, grinding, etching with 37% phosphoric acid for 30sec, silane treatment, and application of bonding agent ; Group 5, grinding, etching with 4% hydrofluoric acid for 30sec. silane treatment, and application of bonding agent. Indirect composite resin specimens ($Artglass^{\circledR}$, Heraeus Kulzer, Germany) were aged for 1 week in $37^{\circ}C$ distilled water and divided into seven groups Group 1 - Group 5, equal to Charisma specimens; Group 6, grinding, etching with 37% phosphoric acid for 60sec, silane treatment, and application of bonding agent; Group7, grinding, etching with 4% hydrofluoric acid for 60 sec, silane treatment, and application of bond-ing agent. The repair material($Charisma^{\circledR}$) was then added on the center of the surface (5 mm in diameter. 5 mm in height). The shear bond strength was tested and the data was analyzed using one-way ANOVA and the Student- Newman-Keuls test. The following conclusions were drawn. 1 The shear bond strength of $Charisma^{\circledR}$ specimens aged for 1 hour was significantly higher in Group 2 and Group 5 than in Group 1 (p<0.05), and that of $Charisma^{\circledR}$ specimens aged for 1 week was signifi-cantly higher in Group 3 and Group 5 than in Group 1 (p<0.05). No significant difference was found in the bond strength of specimens aged for 5 min and 24 hours. 2. In Group 2 of the $Charisma^{\circledR}$ specimens, there was significant difference between the bond strength of 24 hours and that of 1 week (p<0.05). 3. In Group 4 of the $Charisma^{\circledR}$ specimens, the shear bond strength of specimens aged for 24 hours was significantly higher than the others(p<0.05) 4. There was no significant difference between the shear bond strength of the $Artglass^{\circledR}$ specimens, 5. Most of the $Charisma^{\circledR}$ specimens showed cohesive fractures. Artglass^{\circledR}$ specimens that were etched with acid (phosphoric or hydrofluoric) for 30 sec showed more cohesive fractures.

• Restorative Dentistry and Endodontics
• /
• v.12 no.2
• /
• pp.45-53
• /
• 1987

The purpose of this study was to evaluate the tensile bond strength between composite resin and the human enamel. Three composite resin systems, two chemical (Clearfil Posterior, and Clearfil Posterior-3) and one light cure (Photo Clearfil-A), used with and without an intermediate resin (clearfil bonding agent), were evaluated under different amounts of load (10g, 200g and 200g for a moment) for in vitro tensile bond strength to acid-eched human enamel. Clinically intact buccal or lingual surfaces of 144 freshly extracted human permanent molars, embedded in acrylic were flattened with No #600 carborundum discs. Samples were randomly assigned to the different materials and treatments using a table of random numbers. Eight samples were thus prepared for each group(Table 2) these surfaces were etched with an acid etchant (Kurarey Co. Japan) in a mode of etching for 30 seconds, washing for 15 seconds, and drying for 30-seconds. During the polymerization of composite resin on the acid-etched enamel surfaces with and without bonding agent 10-gram, 200 gram and temporary 200 gram of load were applied. The specimens were stored in 50% relation humidity at $37^{\circ}C$ for 24 hours before testing. An universal Testing machine (Intesco model No. 2010, Tokyo, Japan) was used to apply tensile loads in the vertical directed (fig 5), and the force required for separation was recorded with a cross head speed of 0.25 mm/min and 20 kg in full scale. The results were as follow: 1. The tensile bond strength was much greater in applying a bonding agent than in not doing that. 2. The tensile bond strength of chemical cure composite resin was higher than that of light cure composite resin with applying on bonding agent on the acid-etched enamel. 3. In case of not applying a bonding agents on the acid-etching enamel, the highest tensile bond strength under 200 gram of load was measured in light cure composite resin. 4. The tensile bond strength under 200-gram of load has no relation with applying the bonding agent. 5. Under the load of 10-gram, There was significant difference in tensile bond strength as applying the bonding agent.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.4
• /
• pp.887-890
• /
• 2005

To evaluate the hepatoprotective activity of lactic acid bacteria, their effects on tert-butylperoxide (t-BHP)-induced hepatotoxicity in mice were measured. When lactic acid bacteria at doses of 0.5 and 2 g (wet weight)/kg were orally administered to mice with t-BHP-induced liver injury, these bacteria significantly inhibited the increase of plasma alanine aminotransferase and aspartate aminotransferase activities by $17-57\%$ and $57-66\%$ of the t-BHP control group, respectively. However, these lactic acid bacteria did not protect cytotoxicity induced by t-BHP against HepG2 cells. The inhibitory effects of these lactic acid bacteria at a dose of 15 g/kg were comparable with that of diphenyl dimethyl bicarboxylate at a dose of 0.2 g/kg, which has been used as a commercial hepatoprotective agent. Among these lactic acid Jacteria, Bifidobacterium longum HY8001 exhibited the most potent hepatoprotective effect. These orally administered lactic acid bacteria inhibited liver lipid peroxidation on t-BHP-induced hepatotoxicity of mice. We suggest that lactic acid bacteria may be an effective agent against liver injury.

• Korean Journal of Materials Research
• /
• v.28 no.2
• /
• pp.82-88
• /
• 2018

Stable slurries of YSZ in aqueous suspension with added polymer dispersants, namely, poly-methacrylic acid ammonium salt (PMMA), poly-acrylic acid (PAA) and poly-acrylic-co-maleic acid (PAMA), were mixed with the monomolecular dispersants citric acid and oxalic acid. The dispersion properties of the suspension were investigated using PSA, viscosity, sedimentation, and FT-IR. The polymer dispersants and monomolecular dispersants were attached to the YSZ surface by the carboxylic group, as shown by the FTIR results. A stabilized aqueous suspension was obtained when the polymer dispersant and citric acid were mixed and compared to the use of citric acid alone as a dispersant agent. When the polymer dispersant and citric acid were mixed and milled through attrition milling, there was a smaller particle size compared to when the polymer dispersant alone was used as a dispersant agent. This study determined that the particle size of the mixed dispersant was affected by the properties of the monomolecular dispersant and that the stability of the suspension was affected by the polymer dispersant. However, when slurries of YSZ were mixed with oxalic acid, the particle bridging behavior was the result of the high degree of viscosity and the small sedimentation height.