• Archives of Pharmacal Research
• /
• v.16 no.4
• /
• pp.343-346
• /
• 1993

A new method was described for the preparation of 7-[p-(methylthio)benzoyl]-5-benzofuranacetic acid 6, which is an analgestic agent. Methyl 5-(2, 3-di-hydobenzofuran)acetate 3 was obtained by Friedel-Crafts reaction of 2, 3-dihydrobenzofuran with methyl .alpha.-chloro-.alpha.(methylthio)actate 1 and desulfurization of 2. Tifurac 6 was synthesized from acylation of 3 with p-(methythio)benzoyl chioride followed by bromination of 4, dehydrohalogenation, and hydrolysis of 5.

• Journal of the Korean Chemical Society
• /
• v.46 no.5
• /
• pp.412-429
• /
• 2002

Chiral separation of gemifloxacin, an quinolone antibacterial agent, using (+)-(18-crown-6)-tetracar-boxylic acid $(18C6H_4)$ as a chiral selector was performed by capillary electrophoresis (CE). Direct analysis of quinolone antibacterial agent in body fluid is beneficial in terms of fast analysis time, multicomponent analysis. However, high con-centration of sodium ion in body fluid can prevent gemifloxacin from interacting with $18C6H_4$ since sodium ion has high affinity with $18C6H_4$ due to the strong charge interaction. Ethylenediaminetetraacetic acid (EDTA), as a chelating ligand, was added in the running buffer in order to reduce the interaction between sodium ion and the chiral selector. Increased separation efficiency and reduced migration time were observed while sodium ion exists in the sample solution at the concentration up to 150 mM.

• Journal of the Korea Concrete Institute
• /
• v.23 no.3
• /
• pp.265-272
• /
• 2011

Even though concrete is the most important material for building structures, its intrinsic gray color degrades urban esthetics. In order to improve this problem, coloring methods of mixing pigment in concrete batch and painting the surface of concrete surface have been tried. However, applications of the coloring methods in construction field are difficult due to high cost and low durability. Recently, acid stain agent is emerging as a new coloring method for concrete. It is able to apply a remarkably thin colored layer on a concrete surface from chemical reaction between acid and alkaline solutions. This study has examined the changes and variations of the surface layer of mortar specimen from chemical reaction of acid stained agents. The colors were changed into natural irregular stains according to aging. After the staining, no shape change was found from visible inspections. Microstructure of the colored surface applied with acid stained agent was much rougher than that of original mortar. When the colored layer was compared to original surface, crystals of hydrate such as $Ca(OH)_2$ and C-S-H gel were observed. Surface hardness was same or slightly higher in the colored layer. The value of pH was reduced by approximately 10%, weight contents of elements such as Ca, Si, and Al were low. In the chemical composition of the colored layer, the non-cement based elements of Mn, Cr, and Cu increased. Also, Fe and alkali elements of K and Na increased.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.472-480
• /
• 2005

The purpose of this study was to investigate the effective penetration methods of acid etching agents in the pit and fissures on the occlusal surface. Extracted maxillary first and second premolars were divided into 4 groups : to Group I only acid etching agent was applied, to Group II ultrasonic scaler as well as acid etching agent were applied, to Group III after fissurotomy acid etching agent was applied, and to Group IV after fissurotomy the same process performed with Group II. The comparison between the 4 groups by the use of scanning electron microscope showed the results as follows : 1. Comparing each groups with regard to the penetration rate(%) of acid etching agents, Group III and Group IV showed improved penetration rate(%) compared with Group I. Group II made no significant different results from Group I, but had somewhat better penetration rate(%). 2. Comparing each groups with regard to the penetration rate(%) of acid etching agents according to regions within fissures, Group III and Group IV showed more improved penetration rate than Group I in the mesial pit and distal pit. However, no significant difference between each groups was showed in the middle fissure.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.1
• /
• pp.15-28
• /
• 2019

In accordance with the decommissioning plan for the Kori Unit 1 NPP, the reactor coolant system will be chemically decontaminated as soon as possible after permanent shutdown. This study developed the chemical decontamination process though the development project of decontamination technology of reactor coolant system and dismantled equipment for NPP decommissioning, which has been carried out since 2014. In this study, Oxidation/reduction process was conducted using system decontamination process development equipment of lab scale and was divided into unit and continuous processes. The optimal process time was derived from the unit process, and decontamination agent and the number of process were derived through the continuous processes. Through the unit process, the oxidation process took 5 hours and the reduction process took 4 hours. As optimum decontamination agent, the oxidizing agent was $200mg{\cdot}L^{-1}$ Permanganic acid + $200mg{\cdot}L^{-1}$ Nitric acid and the reducing agent was $2000mg{\cdot}L^{-1}$ Oxalic acid. In the case of the number of processes, all oxide films were removed during the two-cycle chemical decontamination process of STS304 and SA508. In the case of Alloy600, all oxide films were removed when chemical decontamination was performed for three cycles or more.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.111-118
• /
• 2016

The effects of pulp beating degree and bulky promotor concentration on the properties of handsheet including a bulk and strength have been investigated during manufacturing of low density paper (high bulk paper) with cationic fatty acid bulky promotor. It was found that paper bulk increased with increasing cationic fatty acid bulky agent concentration, while tensile strength decreased. On the other hand the opacity of handseets also increased with increasing cationic fatty acid bulky agent concentration, while brightness decreased slightly. With increasing pulp beating degree, paper bulk as well as tensile strength increased, while opacity decreased. Brightness did not show a significant difference with increasing pulp beating degree. The highest bulk and strength values were observed when 1.5% (SwBKP) and 2% (HwBKP) of bulky promotor was treated into the 450 mL CSF pulp slurry.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.477-487
• /
• 2000

A series of poly(L-lactic acid) (PLLA)/poly($\beta$-hydroxynonanoate) (PHN) blend were prepared to study the miscibility and the crystallization behaviors. The thermal behaviors and characterization of PLLA/PHN blends Were studied using differential scanning calorimetry (DSC), XRD and polarizing optical microscopy (POM). The PLLA and PHN are partially miscible in amorphous region. The crystallinity of PLLA increased as the content of PHN increased, and T$_{g}$, T$_{c}$, and T$_{m}$ of PLLA shift as the content of PHN increased. Moreover, the number of PLLA spherulite increased as the content of PHN increased in the POM experiment. Thus, PHN acted as a nucleating agent to PLLA.

• Journal of the Korean Applied Science and Technology
• /
• v.10 no.2
• /
• pp.41-47
• /
• 1993

Chitin was isolated from crab shells by modified Hackman's method, which was treated again with aqueous sodium hydroxide solution to give alkali chitin(sodium alkoxide of chitin). And after, the alkali chitin is allowed to react with monochloroacetic acid to synthesize 6-O-(carboxymethyl) chitin [CM-Chitin] under diminished pressure. In order to synthesize high performance CM-Chitin as hygroscopic agent, it was measured that the yield and degree of subsititution of each CM-Chitin according to molar ratio(monochloroacetic acid equivalent mol/N-acetyl-D-glucosamine residue) and their moisture-absorption and moisture-release properties were measured and compared with those of hyaluronic acid. The moisture-absorption and moisture-release properties of CM-Chitin, especially 0.8 in degree of substitution, were found quite similar to those of hyaluronic acid. The preliminary results show that CM-Chitin might be used as hygroscopic agent instead of hyaluronic acid in field of cosmetics.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.1
• /
• pp.55-59
• /
• 2001

These N-acyl amino acid surfactants is normally produced by reaction of acid anhydride with sodium ${\ell}-glutamate$ hydrolysates under Schotten-Baumann condition i.e., in alkaline aqueous medium. To avoid using fatty acid chlorides, acylations were also carried out with the fatty acids themselves or with their methyl esters, but unfortunately these methods cannot be used in practice, dodecenyl succinic anhydride, was to be studied for their suitability as acylating agents the production if acylated glutamine hydrolysates. The surface activities including surface tension forming power, forming stability and emulsifying power were measured. The experimental results revealed that the products have a good emulsifying power. Thus, there derivatives will be expected to be used an emulsifying agent for O/W type cosmetic emulsion.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.22 no.1
• /
• pp.27-35
• /
• 2024

During the dismantling of nuclear facilities, a large quantity of radioactive concrete is generated and chelating agents are required for the decontamination process. However, disposing of environmentally persistent chelated wastes without eliminating the chelating agents might increase the rate of radionuclide migration. This paper reports a rapid and straightforward ion chromatography method for the quantification of citric acid (CA), a commonly used chelating agent. The findings demonstrate acceptable recovery yields, linearities, and reproducibilities of the simulated samples, confirming the validity of the proposed method. The selectivity of the proposed method was confirmed by effectively separating CA from gluconic acid, a common constituent in concretes. The limits of detection and quantification of the method were 0.679 and 2.059 mg·L^-1, respectively, while the recovery yield, indicative of the consistency between theoretical and experimental concentrations, was 85%. The method was also employed for the quantification of CA in a real concrete sample. These results highlight the potential of this approach for CA detection in radioactive concrete waste, as well as in other types of nuclear wastes.