• Archives of Pharmacal Research
• /
• 제20권5호
• /
• pp.507-509
• /
• 1997

Several new spiro compounds were synthesized via one-pot ternary condensation of isatin, malononitrile and each of thiobarbituric acid, barbituric, 3-methyl-pyrazolin-5-one, 1-phenyl-3-methyl-pyrazolin-5-one, acetylacetone, benzoylacetone, ethyl acetoacetate, phenacyl cyanide or ethyl-cyanoacetate dimer. Structures and reaction mechanisms were reported and supported via a second synthetic route.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1875-1878
• /
• 2013

• 대한화학회지
• /
• 제12권4호
• /
• pp.150-154
• /
• 1968

2,3,4-Pentanetrionetrioxime was synthesized from 2,4-pentanedione(or acetylacetone) and its acid dissociation constants were determined in 50%(v/v) dioxane-water solvent mixture at $20{\pm}0.1^{\circ}C$. The color reactions of the ligand with divalent metal ions, Fe(II), Ni(II), Co(II), Cu(II), and Mn(II) were studied.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4321-4326
• /
• 2011

A new series of heteroleptic cyclometalated iridium(III) complexes has been synthesized and characterized by absorption, emission and cyclic voltammetry studies: $(pqx)_2Ir(acac)$ (1), $(dmpqx)_2Ir(acac)$ (2) and $(dfpqx)_2Ir(acac)$ (3) where pqx=2-phenylquinoxalinate, dmpqx=2-(2,4-dimethoxyphenyl)quinoxalinate, dfpqx=2-(2,4-difluorophenyl) quinoxalinate and acac=acetylacetonate anion. The reaction of excess acetylacetone with ${\mu}$-chloride-bridged dimeric iridium complex, $[(C\^N)_2Ir({\mu}-Cl)]_2$, gives a complex 1 and an unusual hydridoiridium(III) complex, $(pqx)IrH(acac)_2$ (4). The complex 1, 2 and 3 show their emissions in an orangered region (${\lambda}_{PL,max}$ = 583-616 nm), and the emission maxima can be tuned by the change of substituent at phenyl ring of 2-phenylquinoxaline ligand. The phosphorescent line shape indicates that the emissions originate predominantly from $^3MLCT$ states with little admixture of ligand-based $^3({\pi}-{\pi}^*)$ excited states. The structures of complex 3 and 4 are additionally characterized by a single crystal X-ray diffraction method. The complex 3 shows a distorted octahedral geometry around iridium(III) metal ion. A strong trans influence of the phenyl ring is examined. In complex 4, there are two discrete molecules which are mirror images each other at the ratio of 1:1 in an unit cell. We propose that the phosphorescent complex 1, 2 and 3 are possible candidates for the phosphors in OLEDs applications.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.49-52
• /
• 2011

A dinuclear copper(II) complex of [$Cu_2(aceace)_4$(dipyph)] [aceace = acetylacetone, dipyph = 1,4-di(4-pyridylethene-2-yl-)benzene] has been synthesized and characterized by elemental analysis, IR and X-ray single crystal diffraction. It crystallizes in the monoclinic system, space group P21/c, with lattice parameters a = 7.9584(16) $\AA$, b = 18.594(4) $\AA$, c = 15.063(4) $\AA$ $\beta=120.97(2)^o$ and $M_r$ = 807.85 ($C_{40}H_{44}Cu_2N_2O_8$), Z = 2. Each of the $Cu^{2+}$ ion adopts a square pyramid geometry and coordinates with four oxygen atoms from two aceace ligands and one nitrogen atom from dipyph bidentate ligand. Magnetic measurement shows that the Weiss constant and Curie constant for the title compound are -0.22 K and 0.1154 emu K/mol, respectively. Thermal stability data indicate that the title complex undergoes two steps decomposition and the residue is $Cu_2O_4$. In the potential range of -1.5 ~ 0.8 V, the title complex represents an irreversible electrochemical process.

• 분석과학
• /
• 제17권2호
• /
• pp.173-179
• /
• 2004

Ethylene glycol의 polymerization-complex route를 통한 졸-겔 합성법으로 안정하고 균일한 barium titanate 분말 및 박막을 제조하였다. 출발 용액으로 킬레이팅 리간드인 acetylacetone을 barium과 titanium 용액에 치환시켜 합성한 복합 산화물 졸 용액을 사용했을 때 박막을 만들 수 있었다. 졸 용액의 입자 분포도는 안정한 gaussian 분포를 보였으며, $1100^{\circ}C$에서 열처리한 겔 분말의 입자 크기는 40~77 nm이었다. 열분석 및 FT-IR, $^{13}C$ CP/MAS NMR 스펙트라와 XRD 결과로부터 (Ba-Ti)-oxycarbonate 중간상을 거쳐 $BaTiO_3$ 분말이 형성됨을 알 수 있었다. Quartz에 스핀 코팅으로 제조한 박막은 치밀하고 균열 없는 미세 조직을 보였다. $1100^{\circ}C$에서 열처리한 박막 표면의 입자 크기는 220 nm였으며 치밀한 입자 성장을 관찰할 수 있었다.

• 한국분말재료학회지
• /
• 제30권5호
• /
• pp.394-401
• /
• 2023

Li_1.5Al_0.5Ti_1.5(PO₄)₃ (LATP) is considered to be one of the promising solid-state electrolytes owing to its excellent chemical and thermal stability, wide potential range (~5.0 V), and high ionic conductivity (~10^-4 S/cm). LATP powders are typically prepared via the sol-gel method by adding and mixing nitrate or alkoxide precursors with chelating agents. Here, the thermal properties, crystallinity, density, particle size, and distribution of LATP powders based on chelating agents (citric acid, acetylacetone, EDTA) are compared to find the optimal conditions for densely sintered LATP with high purity. In addition, the three types of LATP powders are utilized to prepare sintered solid electrolytes and observe the microstructure changes during the sintering process. The pyrolysis onset temperature and crystallization temperature of the powder samples are in the order AC-LATP > CA-LATP > ED-LATP, and the LATP powder utilizing citric acid exhibits the highest purity, as no secondary phase other than LiTi₂PO₄ phase is observed. LATP with citric acid and acetylacetone has a value close to the theoretical density (2.8 g/cm³) after sintering. In comparison, LATP with EDTA has a low sintered density (2.2 g/cm³) because of the generation of many pores after sintering.

• 한국재료학회지
• /
• 제6권5호
• /
• pp.449-456
• /
• 1996

BaO, SrCI2.6H2O 그리고 Ti(OPri)4를 출발 원료로 사용하여 균일한 BaxSr1-xTiO3(BST) 솔을 합성하였고, BST 박막을 회전 코팅 법으로 Si 및 Pt/Ti/SiO2/Si 기판위에 제조하였다. 적외선 및 NMR 스펙트럼 분석으로 킬레이션 조제로 사용한 acetylacetone(AcAc)이 엔올 형태로 Ti-알콕사이드와 결합하여 솔 안정화에 기여함을 확인하였다. Xedrogel에 대한 DT/TGA 및 적외선 스펙트럼 결과로부터 페로브스카이트 상생성이 $600^{\circ}C$ 이상에서 이루어짐을 관찰하였다. $700^{\circ}C$에서 열처리한 박마은 -300(10 KHz)의 상대유전율을 나타내었고, 결정립의 저항 및 입계의 병렬 RC 성분으로 등가회로를 구성할 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제2권1호
• /
• pp.14-17
• /
• 1972

Spectrophotometric determination of isonicotinic acid hydrazide sodium methane sulfonate was examined and a new method has been established. Isonicotinic acid hydrazide sodium methane sulfonate reacts with acetylacetone solution (NASH Reagent) to produce a yellow dye, which exhibits absorption maximum at about $412\;m{\mu}$. Limits of masurement of isonicotinic acid hydrazide sodium methane sulfonate was $20-100{\mu}g/ml$. By this method isonicotinic acid hydrazide methane sulfonate can be determined in the presence of isonicotinic acid hydrazide.

• 한국세라믹학회지
• /
• 제28권9호
• /
• pp.705-711
• /
• 1991

Alumina precursor sol was obtained by the reaction of Al(OC4H9)3 and acetylacetone in the solvent followed by the partial hydrolysis. This sol was measured by viscosity and the effect of pH. The powders obtained from this sol were calcined at the various temperatures. The transition of crystals and crystal state were investigated at the various temperatures. The powders dried at 90$^{\circ}C$ showed amorphous and ${\gamma}$-Al2O3 at 900$^{\circ}C$, ${\alpha}$-Al2O3 mono-phase at 1050$^{\circ}C$ respectively. As a result of Al27-MASNMR analysis, amorphous and ${\alpha}$-Al2O3 powders showed 6-coordinated Al, ${\gamma}$-Al2O3 4-coordinated Al respectively.