• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.111-120
• /
• 2023

The nucleation mechanism was studied using a calcium ion selective electrode (Ca ISE) to observe the formation of CaCO₃, a representative mineral in the CO2 cycle, and to analyze the effect of the Mg/Ca-ratio and temperature on the formation of pre-nucleation cluster (PNC) and CaCO₃. As a result of the experiment, a small amount of crystal was formed. Energy dispersive X-ray spectroscopy (EDS) was used for surface element analysis, and a field emission scanning-electron microscope (FE-SEM) was used for the morphology analysis of synthesized carbonates. These results showed that various shapes of crystalline CaCO₃ (calcite, aragonite, etc.) were observed for each Mg/Ca ratio and temperature. In addition, the calibration plot obtained from Ca ISE showed information on the formation process of CaCO₃. Our results showed that as magnesium ions interfered with the binding of calcium and carbonate ions and delayed the aggregation between PNCs, the nucleation and formation of CaCO₃ were delayed. On the other hand, the temperature showed an opposite trend as compared to the effect of magnesium under our experimental conditions, indicating that temperature accelerated the formation of CaCO₃. Furthermore, the morphology of CaCO₃ clearly changed according to the Mg/Ca ratio and temperature, and it was confirmed that the two factors are very important for CaCO₃ formation in that they could affect the overall process.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.258-263
• /
• 2023

In this study, conductive polymers and the enzyme tyrosinase (Tyr) were deposited on the surface of a screen printed carbon electrode (SPCE), which can be fabricated as a disposable sensor chip, and applied to the detection of bisphenol F (BPF), an endocrine disruptor with proven links to male diseases and thyroid disorders, using electrochemical methods. On the surface of the SPCE working electrode, which was negatively charged by oxygen plasma treatment, a positively charged conductive polymer, poly(diallyldimethyl ammonium chloride) (PDDA), a negatively charged polymer compound, poly(sodium 4-styrenesulfonate) (PSS), and another layer of PDDA were layered by electrostatic attraction in the order of PDDA, PSS, and finally PDDA. Then, a layer of Tyr, which was negatively charged due to pH adjustment to 7.0, was added to create a PDDA-PSS-PDDA-Tyr sensor for BPF. When the electrode sensor is exposed to a BPF solution, which is the substrate and target analyte, 4,4'-methylenebis(cyclohexa-3,5-diene-1,2-dione) is generated by an oxidation reaction with the Tyr enzyme on the electrode surface. The reduction process of the product at 0.1 V (vs. Ag/AgCl) generating 4,4'-methylenebis(benzene-1,2-diol) was measured using cyclic and differential pulse voltammetries, resulting in a change in the peak current with respect to the concentration of BPF. In addition, we compared the detection performance of BPF using an ionic liquid electrolyte as an alternative to phosphate-buffered saline, which has been used in many previous sensing studies. Furthermore, the selectivity of bisphenol S, which acts as an interfering substance with a similar structure to BPF, was investigated. Finally, we demonstrated the practical applicability of the sensor by applying it to analyze the concentration of BPF in real samples prepared in the laboratory.

• Korean small business review
• /
• v.41 no.4
• /
• pp.1-36
• /
• 2019

The purpose of this study is to identify the relationships among purposes and contents of smart factory building and continuous utilization of smart factory. Specifically, this study identifies two types of purposes of smart factory building as follows: (1) improving productivity, (2) increasing flexibility. In this study, three aspects of smart factory building contents were suggested like this: (1) automation area (facility automation vs. work automation), (2) big data system focus (radical transformation vs. incremental improvement), and (3) value chain integration area (internal value chain integration vs. external value chain integration). In addition, we looked at how firm size moderates the purposes - contents - continuous utilization of smart factory relationship. A questionnaire survey was conducted on 151 manufacturing companies. More specifically, out of 151 companies, 100 are small-and-medium-sized enterprises and 51 large-sized enterprises. All questionnaires were targeted at companies with Smart Factory level above level 2. The analysis results of this study using Smart PLS statistical programs are as follows. First, the purposes of smart factory building including increasing productivity and flexibility had positive impacts on all of the contents of smart factory building. Second, all of smart factory building contents had positive impacts on the continuous use of smart factory except big data system for incremental improvement of manufacturing process. Third, the impacts of smart factory building purposes implementation on smart factory building contents varied depending on whether the purpose is productivity improvement or flexibility. Fourth, it was founded that firm size moderated the relationships of purposes - contents - continuous utilization of smart factory in such a way that large-sized firms tend to empathize the link between flexibility and smart factory building contents for continuous use of smart factory, while small-and-medium-sized-firms emphasizing the link between productivity and smart factory building contents. Most of the previous studies have focused on presenting current smart factory deployment cases. However, it is believed that this research has made a theoretical contribution in this field in that it established and verified a research model for the smart factory building strategy. Based on the findings from a working-level perspective, corporate practitioners also need to have a different approach to smart factory building, which should be emphasized depending on whether their purpose of building smart factory is to increase productivity or flexibility. In particular, since the results of this study identify the moderating effect of firm size, it is deemed necessary for firms to implement a smart factory building strategy suitable for their firm size.

• Applied Chemistry for Engineering
• /
• v.35 no.1
• /
• pp.1-7
• /
• 2024

Mn-M/Al₂O₃ (M = Cu, Fe, Co, and Ce) catalysts were prepared for simultaneous oxidation of NO, CO, and CH₄, and their oxidation activities were compared. The Mn-Cu/ Al₂O₃ catalyst with the best simultaneous oxidation activity was characterized by XRD, Raman, XPS, and O₂-TPD analysis. The result of XRD indicated that Mn and Cu existed as complex oxides in the Mn-Cu/Al₂O₃ catalyst. Raman and XPS results showed that electron transfer between Mn ions and Cu ions occurred during the formation of the Mn-O-Cu bond in the Mn-Cu/Al₂O₃ catalyst. The XPS O 1s and O₂-TPD analyses showed that the Mn-Cu/Al₂O₃ catalyst has more adsorbed oxygen species with high mobility than the Mn/Al₂O₃ catalyst. The high simultaneous oxidation activity of the Mn-Cu/Al₂O₃ catalyst is attributed to these results. Gas-phase NO promotes the oxidation reactions of CO and CH₄ in the Mn-Cu/Al₂O₃ catalyst while suppressing the NO oxidation reaction. These results were presumed to be because the oxidized NO was used as an oxidizing agent for CO and CH₄. On the other hand, the oxidation reactions of CO and CH₄ competed on the Mn-Cu/Al₂O₃ catalyst, but the effect was not noticeable because the catalyst activation temperature was different.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.4
• /
• pp.569-583
• /
• 1995

Background: The expression of the adhesion molecules on the cell surface is important in the movement of cells and the modulation of immune response. DILD starts as an alveolitis and progresses to pulmonary fibrosis. So adhesion molecules in these patients is expected to be increased. There are several reports about adhesion molecules in DILD in terms of the percentage of positive cells in immuno-stain, in which the interpretation is subjective and the data were variable. Methods: So we measured the relative median fluorescence intensity(RMFI) which is the ratio of the FI emitted by bound primary monoclonal antibody to FI emitted by isotypic control antibody of the cells in BALF of 28 patients with DILD(IPF:10, collagen disease:7, sarcoidosis:9, hypersensitivity pneumonitis:2) and 9 healthy control. Results: RMFI of the ICAM-1 on AM($3.30{\pm}1.16$) and lymphocyte($5.39{\pm}.70$) of DILD were increased significantly than normal control($0.93{\pm}0.18$, $1.06{\pm}0.21$, respectively, p=0.001, P=0.003). RMFI of the CD18 on lymphocyte was also higher($24.9{\pm}14.9$) than normal($4.59{\pm}3.77$, p=0.0023). And there was a correlation between RMFI of ICAM on AM and the % of AM(r=-0.66, p=0.0001) and lymphocyte(r=0.447, p=0.0116) in BALF. Also RMFI of ICAM on lymphocyte had a significant (r=0.593, p=0.075) correlation with the % of IL-2R(+) lymphocyte in BALF. The soluble ICAM(sICAM) in serum was also significantly elevated in DILD($499.7{\pm}222.2\;ng/ml$) compred to normal($199.0{\pm}38.9$) (p=0.00097) and sICAM in BAL fluid was also significantly higher than normal control group($41.8{\pm}23.0\;ng/ml$ vs $20.1{\pm}13.6\;ng/ml$). There was a Significant correlation between sICAM level in serum and the expression of ICAM-l on AM(r=0.554, p=0.0259).Conclusion: These data suggest that in DILD the expression of adhesion molecules is increased in the AM and BAL lymphocytes with elevated serum sICAM, and these parameter may be useful in determining disease activity.