• 한국해양공학회지
• /
• 제28권2호
• /
• pp.133-139
• /
• 2014

Offshore wind turbines have been constructed extensively throughout the world. These turbines are subjected to approximately $10^8$ horizontal load cycles produced from wind, waves, and current during their lifetimes. Therefore, the accumulated displacement of the foundation under horizontal cyclic loading has significant effects on the foundation design of a wind turbine. Akili(2006) and Achmus et al.(2009) performed cyclic triaxial tests on dry sands and proposed an empirical model for predicting the accumulated plastic strain of sands under long-term cyclic loading. In this study, cyclic triaxial tests were performed to analyze the cyclic loading behaviors of dry sands. A total of 27 test cases were performed by varying three parameters: the relative density of the sands, cyclic load level, and confining stress. The test results showed that the accumulated plastic strain increased with an increase in the cyclic load level and a decrease in the relative density of the sand. The confining stress had less effect on the plastic strain. In addition, the plastic strain at the 1st loading cycle was about 57% of the accumulated strain at 1,000 cycles. Finally, the input parameters of the empirical models of Akili(2006) and Achmus et al.(2009) were evaluated by using the relative density of the sand and the cyclic load level.

• Structural Engineering and Mechanics
• /
• 제3권6호
• /
• pp.611-622
• /
• 1995

This paper is concerned with inelastic load carrying capacity of tapered steel members with or without accumulated plastic strains resulted from previous loading histories. A finite element program is developed using stiffness matrices of tapered members and is applicable for analyses with material and geometric nonlinearity. Results of analyses are compared with other available solutions and with experimental results.

• 한국압력기기공학회 논문집
• /
• 제17권1호
• /
• pp.1-7
• /
• 2021

This paper presents sensitivity analysis results of strain on notches under cycling loading to 2-D finite element density considering plasticity. Cylindrical notched specimens having some stress concentrations were modeled with 2-D axisymmetrical finite element having various finite element densities. Elasto-plastic finite element analysis was performed for the various finite element models subjected to cycling loading considering plasticity. The finite element analysis results were compared to investigate sensitivity of the finite element analysis variables such as von-Mises effective stress, accumulated equivalent plastic strain, and equivalent plastic strain to 2-D finite element density. As a result of the comparison, it was found that the accumulated equivalent plastic strain is more sensitive than the others whereas the von-Mises effective stress is much less sensitive.

• Geomechanics and Engineering
• /
• 제34권5호
• /
• pp.481-489
• /
• 2023

Drained cyclic triaxial tests were conducted on a saturated sand to examine its deformation characteristics under either axial or lateral cyclic loading condition. To apply lateral cyclic loading, the cell pressure was cycled while maintaining a constant vertical stress. The strain accumulations and flow direction in the soil were presented and discussed considering various initial stress ratios (η₀), cyclic stress amplitudes and cyclic stress paths. The results indicate that axial strain accumulation shows an exponential increase with the maximum stress ratio (η^max). The initial deviatoric stress has comparable effects with lateral cyclic stress amplitude on the accumulated axial strain. In contrast, the accumulated volumetric strain is directly proportional to the lateral cyclic stress amplitude but not much affected by η₀ values. Due to the anisotropy of the soil, the accumulated axial and lateral bulging strains are greater in lateral cyclic loading when compared to axial cyclic loading even though η^max is the same. It is also found that η^max affects soil's lateral deformation and increasing the ratio could change the lateral deformation from contraction to bulging. The flow direction depends on η^max in the sand under lateral cyclic loading, regardless of η₀ values and the cyclic stress amplitudes, and a large η^max could lead to great deviatoric strain but a little volumetric strain accumulation.

• Journal of Welding and Joining
• /
• 제2권1호
• /
• pp.41-48
• /
• 1984

Recrystallization technique was applied to analyze plastic strain at the notch tip of coarse grain HAZ in mild steel (SB 41) and high strength steel (SA 588). The notch tip of specimen was deformed by three point bending. Accumulated displacement (Crack Opening Displacement ${delta}t$) by the monotonic and cyclic loading under room temperature and hot strain embrittlement temperature ($250^{\circ}C$) was 0~1.0mm. Recrystallization heat treatment conditions were $650^{circ}C{ imes}3hr$ for SB 41 and $700^{circ}C{ imes}3hr$ for SA 588. The experimental results obtained were as follows ; 1) Distribution of the effective plastic strain at plastic zone was appeared by the function of crack opening displacement, and plastic zone or the effective plastic strain increased with crack opening displacement. 2) Plastic strain at notch tip of HAZ due to accumulated hot strain calculated as follows. .epsilon. over bar $_{p}$ = .epsilon. over bar $_{cr}$ (x/ $R_{x}$ ) $^{m}$ (m=0.25) 3) Work hardending ratio of notch tip for hot strain was linearly increased with .epsilon. over bar $_{max}$ and dependent upon the material types.s.

• 한국지진공학회논문집
• /
• 제7권5호
• /
• pp.47-56
• /
• 2003

본 논문에서는 기존 IWAN 모델을 수정하여 사질토 지반의 반복경화 현상을 나타낼 수 있는 지반의 반복경화모델을 개발하였다. 일반적으로 동적하중을 받는 지반재료는 하중 반복회수에 따라 동적 거동특성이 변화하게 되며 이는 반복 경화 및 연화현상으로 나타난다. 본 논문에서는 등방 경화 또는 등방 연화 거동을 하는 스프링슬라이더 요소를 기존 병렬 IWAN 모델에 추가함으로써 지반의 동적 변형특성 표현이 가능하였다. 등방 경화 거동을 보이는 요소들의 항복 응력은 각각 반복 경화함수에 의하여 증가하도록 정의되었으며, 반복 경화함수는 대칭 한계를 가지는 동적 비틂전단 시험결과로부터 정의되었다. 이렇게 정의된 반복 경화함수는 지반의 동적 변형 특성을 묘사하기 위하여 하나의 독립 변수를 가지게 되며, 사용된 독립변수는 지반의 동적 한계 변형률의 특성을 포함하는 누적전단변형률로 사용되었다. 누적 전단변형률은 반복 전단한계 변형률 이상의 변형률의 누적으로 정의되며, 역재하 및 재재하 곡선에서는 Masing의 법칙을 적용하여 계산될 수 있다. 본 논문에서는 모델의 개발과정을 서술하였고, 모델에 대한 검증은 동반논문인 검증편에 설명하였다.

• Journal of Microbiology and Biotechnology
• /
• 제18권8호
• /
• pp.1408-1415
• /
• 2008

To produce polyhydroxyalkanoate (PHA) from inexpensive substrates by bacteria, vegetable-oil-degrading bacteria were isolated from a rice field using enrichment cultivation. The isolated Pseudomonas sp. strain DR2 showed clear orange or red spots of accumulated PHA granules when grown on phosphate and nitrogen limited medium containing vegetable oil as the sole carbon source and stained with Nile blue A. Up to 37.34% (w/w) of intracellular PHA was produced from corn oil, which consisted of three major 3-hydroxyalkanoates; octanoic (C8:0, 37.75% of the total 3-hydroxyalkanoate content of PHA), decanoic (C10:0, 36.74%), and dodecanoic (C12:0, 11.36%). Pseudomonas sp. strain DR2 accumulated up to 23.52% (w/w) of $PHA_{MCL}$ from waste vegetable oil. The proportion of 3-hydroxyalkanoate of the waste vegetable-oil-derived PHA [hexanoic (5.86%), octanoic (45.67%), decanoic (34.88%), tetradecanoic (8.35%), and hexadecanoic (5.24%)] showed a composition ratio different from that of the corn-oil-derived PHA. Strain DR2 used three major fatty acids in the same ratio, and linoleic acid was the major source of PHA production. Interestingly, the production of PHA in Pseudomonas sp. strain DR2 could not occur in either acetate- or butyrate-amended media. Pseudomonas sp. strain DR2 accumulated a greater amount of PHA than other well-studied strains (Chromobacterium violaceum and Ralstonia eutropha H16) when grown on vegetable oil. The data showed that Pseudomonas sp. strain DR2 was capable of producing PHA from waste vegetable oil.

• Geomechanics and Engineering
• /
• 제37권4호
• /
• pp.383-393
• /
• 2024

Monopile foundations of offshore wind turbines embedded in soft clay are subjected to the long-term cyclic lateral loads induced by winds, currents, and waves, the vibration of monopile leads to the accumulation of pore pressure and cyclic strains in the soil in its vicinity, which poses a threat to the safety operation of monopile. The researchers mainly focused on the hysteretic stress-strain relationship of soft clay and kinds of stiffness degradation models have been adopted, which may consume considerable computing resources and is not applicable for the long-term bearing performance analysis of monopile. In this study, a modified cyclic stiffness degradation model considering the effect of plastic strain and pore pressure change has been proposed and validated by comparing with the triaxial test results. Subsequently, the effects of cyclic load ratio, pile aspect ratio, number of load cycles, and length to embedded depth ratio on the accumulated rotation angle and pore pressure are presented. The results indicate the number of load cycles can significantly affect the accumulated rotation angle of monopile, whereas the accumulated pore pressure distribution along the pile merely changes with pile diameter, embedded length, and the number of load cycles, the stiffness of monopile can be significantly weakened by decreasing the embedded depth ratio L/H of monopile. The stiffness degradation of soil is more significant in the passive earth pressure zone, in which soil liquefaction is likely to occur. Furthermore, the suitability of the "accumulated rotation angle" and "accumulated pore pressure" design criteria for determining the required cyclic load ratio are discussed.

• 한국지반공학회논문집
• /
• 제40권3호
• /
• pp.65-75
• /
• 2024

본 연구에서는 여러 영향 인자들이 사질토의 액상화로 인한 침하에 미치는 영향을 확인하기 위해 변형률 제어조건 하에서 반복단순직접전단시험을 수행하였다. 누적 전단 변형률, 상대밀도, 반복 하중의 형태, 시료 준비 방법 등의 다양한 인자들을 선정하였으며, 지진 하중이 발생하였을 때 인자들이 지반 침하에 미치는 영향을 분석하였다. 시험 결과, 누적 전단 변형률이 낮고 상대밀도가 높은 시료에서 더 작은 부피 변형이 발생하였다. 추가적으로 반복하중의 진폭은 부피 변형에 영향을 미쳤으나, 주파수는 시료의 부피 변형에 영향을 미치지 않는다는 사실을 확인할 수 있었다. 시료 준비 방법에 따라서도 액상화에 따른 침하가 다른 양상을 보인다는 사실을 확인하였으며, 이와 같은 결과들은 향후 액상화로 인한 침하 예측을 수행할 때 기초 연구로써 의미가 있을 것으로 기대된다.

• 한국강구조학회 논문집
• /
• 제12권3호통권46호
• /
• pp.251-258
• /
• 2000

강구조물과 부재들의 지진 손상도 평가법에 새롭게 접근하기 위하여 강한 지진하중을 받는 강재 교각에 대해 수치해석을 수행하였다. 새로운 손상도 평가법에서 파괴 상태에 대한 기준은 지진하중이 재하되는 동안에 응력집중이 가장 심한 단면의 한 부분에서 누적소성변형율의 값이 90%에 이르게 되는 때를 의미한다. 단주기 특성의 지진하중에 대해서는 소성변형율의 누적에 의한 국부좌굴 파괴보다는 허용변위를 초과하는 전체좌굴에 의한 파괴가 지배적인 것으로 밝혀졌다. 장주기 특성의 지진하중에 대해서는 소성변형율이 강재교각 하부의 모서리 부분 요소에 누적되면서 누적 소성변형율에 의한 국부좌굴로 파괴되는 결과를 보였다.