• International journal of advanced smart convergence
• /
• 제9권4호
• /
• pp.1-7
• /
• 2020

This study is a study on the development of AEBS test scenarios for traffic accidents in Korea, and was compared and analyzed using the Traffic Accident Analysis Program. To ensure the safety of passengers and pedestrians in traffic accidents, the number of cars equipped with ADAS is increasing rapidly at all car manufacturers in each country. For traffic accidents used in this study, the domestic traffic accident database (ACCC) produced by SAMSONG was used. Domestic traffic accidents differ from overseas traffic accidents in terms of road type, signal system, driver's seat location and number of vehicles. ACCC databases, which supplemented and reinforced these differences, built a database based on the PC-CRASH program. In the study, we analyze the types of accidents to develop comparative scenarios for each type of road and collision type of traffic accidents. When the road types of traffic accidents in Korea were divided into five types and the collision types were divided into six, it was confirmed that the most types of FRONT-SIDE crashes appeared at the intersection. It is expected that the frequency of possible traffic accidents and collision types can be predicted according to the road type in the accident database, we that it can be used as an AEBS test scenario development suitable for the domestic road environment.

• 대한인간공학회지
• /
• 제34권4호
• /
• pp.353-362
• /
• 2015

Objective: This study aims to analyze occupational accidents of moving helpers by work place type which means the type of residence where moving operation is done. Background: Most efforts have been focused on the industry base comprising various occupational spectrum and provided industry general preventative policies. But occupation specific policies are required for the workers involved and will reduce the occurrences of occupational accidents for the workers subject to similar working environment and process. Method: This study analyzes 208 non-motor vehicle collision related occupational accidents of moving helpers working for used household and office goods moving industry occurring from 2010 to 2012. Accident Type, agencies, event or exposure, parts of body affected are characterized by work places according to the work environment. Results: Accidents characteristics showed the difference between high-rise type and low-rise type on the size of enterprise, age, gender and work experience of the injured. Also the accident type, source of accident and parts of body affected are different between the two work place types. Finally, Accidents occurred on the specific operational processes of moving service also showed different characteristic between the two types. Conclusion and Application: The findings of accident characteristics according to workplace types and operational process of moving service can be used as baseline data for establishing systemized preventative policies for occupational accidents of moving helpers.

• 대한인간공학회지
• /
• 제23권4호
• /
• pp.23-34
• /
• 2004

The importance of the industrial safety has been growing gradually as well as the prevention activities on industrial accidents. Industrial accident rates have been decreasing by the prevention activities. However, the fatal industrial accidents such as the death tend to increase and risk per accident has increased. The previous studies on the industrial accidents focus on the entire accidents. However, these studies are lacking for the fatal industrial accidents such as the death. The purpose of this paper is to analyze the characteristics and trend of death which occurred by industrial accident, based on the real data of deaths collected last 5 years from 1999 to 2003 in korea. This paper suggests a analysis method using MDS(MultiDimensional Scaling) that considers accidents variables and properties simultaneously. We evaluate MDPREF (Multidimensional Analysis of Preference Data), one of the MDS analysis, to know the relations between the type of industry and region as well as the type of industry and occupation. This paper finds the type of industry which has high possibilities of death by regional groups. In addition, we find the type of occupation which has high possibilities of death by the type of industry. These findings indicate that industrial classification should be differently controled according to type of occupation and region.

• 대한인간공학회지
• /
• 제31권1호
• /
• pp.137-142
• /
• 2012

Objective: The aim of this study is to investigate the characteristics of industrial accidents in shipbuilding industry. Background: As the accident frequency in shipbuilding industry is higher than those of other industries, it is important to grasp the accident characteristics of shipbuilding industry to reduce the accidents. Method: This paper aggregated some important accident report of the shipbuilding industry including industrial accident analysis of Korean government and drew some important accident characteristics of shipbuilding industry. Results: Accidents in Shipbuilding industry was reviewed in respect of accidents rate, accidents distribution by age, accidents by employed period, accidents severity, accidents type, accidents type by process, accidents caused by object, and hazards in process. Conclusion: Accident related indexes in shipbuilding were much higher than those of whole industry. Application: These results can be used to provide base information for more effective accident preventions in shipbuilding industry.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.603-608
• /
• 2011

According to the labor related data from Korea Occupational Safety & Health Agency, accident victims of construction industry are increasing 6% annually since 2006. The major reason why the rate of accidents increases in Korea is that lots of labor working with another trades works simultaneously in various type of works. This study analyzes the current accident status in view of the type of building, type of works, and project size for the latest 3 years (2007~2009). As a result, 'single family & semi-detached houses' has the largest number of accidents among buildings. In addition, 'finishing work' shows the highest number in terms of work type. For the size, accidents occurred much for 'less than 300 million'. The results of this study can be used to focus on managing the highly hazardous area where the construction accidents mostly occur; therefore, it is anticipated to contribute to improve efficiency of safety management.

• 한국경제지리학회지
• /
• 제10권2호
• /
• pp.137-152
• /
• 2007

본 연구는 자동차 교통사고에 의한 도시를 유형화하고, 각 유형의 교통사고 특성을 밝히는 것을 목적으로 한다. 자동차 교통사고에 의한 유형도시는 4가지로, A유형은 서울시로 '자동차 용도와 사고유형'과 가장 강한 관련을 맺고 있고, B유형은 오산시로 교통사고 발생규모가 매우 큰 도시이다. C유형은 서울시의 위성도시와 광역시, 남동임해공업지역에 분포하는데, 교통사고의 발생규모가 작은 도시군이다. D유형은 의정부시를 포함한 57개 도시로 전국에 분포하는데, 전국평균보다 자동차 교통사고가 많은 도시군이다. 자동차 교통사고에 의한 각 도시유형과 교통사고 원인과의 관계에서 서울시는 안전거리 미확보, 기타 지역의 도로형태, 보행자 부상이 탁월하며, 오산시는 도로형태에서는 단일로 기타지역에서 많이 발생하며, 중앙선 침범, 14세 이하의 어린이 교통사고가 많이 발생하는 것이 그 특징으로 나타났다. 그리고 C유형은 제1당사자 법규위반에 기타가 포함되었으며, 도로형태에서 교차로 6m 미만에서의 교통사고가 많다는 점, 14세 이하의 어린이 교통사고와 보행자 부상에 의한 교통사고가 많은 것이 특징이다. 마지막으로 D유형은 제1당사자 법규위반, 교차로 운행방법, 61세 이상 부상 14세 이하의 부상, 보행자 부상이 많은 것이 특징이다.

• 대한인간공학회지
• /
• 제34권5호
• /
• pp.427-436
• /
• 2015

Objective: This study aims to analyze occupational accidents of parking lot attendants by parking lot type. Background: Recently, efforts are made to analyze accident characteristics by occupation type targeting the workers engaged in the same work. Method: This study analyzes 303 occupational accidents of parking lot attendants occurring from 2010 to 2012. Parking lots are grouped into two groups according to the work environment. One is public/ground type which comprises road side or open area parking lots and the other is building/mechanical type which comprises a multi-story parking building with connecting ramps and/or mechanical parking system. The characteristics of occupational accidents by parking lot type are analyzed. Results: Accident characteristics showed the difference between public/ground type and building/mechanical type on the size of enterprise, age, gender and work experience of the injured. Also the accident type, source of accident and parts of body affected are different between the two parking lot types. Conclusion and Application: The findings of accident characteristics according to parking lot types can be used as baseline data for establishing systemized preventative policies for occupational accidents of parking lot attendants.

• 지역사회간호학회지
• /
• 제32권1호
• /
• pp.64-72
• /
• 2021

Purpose: The purpose of this study is to analyze occupational accident compensation insurance coverage and occupational accidents incidence for special-type delivery workers. Methods: The data for occupational accident compensation insurance coverage and occupational accidents from 2012 to 2017 were analyzed through descriptive statistics. Results: Rates of occupational accident compensation insurance coverage of special-type delivery workers decreased gradually from 43.4% in 2012 to 28.5% in 2016, and 29.0% in 2017. Rates of occupational illnesses death per ten thousand workers increased gradually from 2.1‱ in 2013 to 3.1‱ in 2016, and 8.6‱ in 2017. All occupational illness deaths were due to cerebro-cardiovascular diseases. Road traffic accidents and slips accounted for the largest proportion of occupational accidents. Conclusion: Special-type delivery workers have a high risk of industrial accidents, so it is necessary to raise industrial accident insurance coverage and provide professional and systematic occupational safety and health services.

• 대한인간공학회지
• /
• 제34권5호
• /
• pp.519-529
• /
• 2015

Objective: This study aims to analyze the characteristics of occupational accidents and injuries of telecommunications line and cable workers by type of workplace and operational process of cabling service and to provide baseline data in establishing the preventive policies for occupational accidents and injuries. Background: In order to set up the preventive policies for occupational injuries and illness systematically, the accident analysis by industry should be preceded. To establish more effective policies, it should be done by occupation for persons who work in various kinds of occupation rather than by industry for persons who do in the same occupation. Method: In this study, the 176 occupational accidents and injuries were classified by type of workplace - indoor (inside building) and outdoor (at the top of utility pole, in a manhole, or in the fields) - and also done by operational process involved at the time of the accident. By analyzing the characteristics of occupational injuries and illness by type of workplace and operational process, respectively, this study can be helpful in establishing the preventative policies for occupational accidents and injuries. Results: The characteristics of occupational accidents and injuries by type of workplace showed that there were differences in terms of accident rate between indoor and outdoor on age of the injured, while not on employment-size and work experience of the injured. In addition, the characteristics on accident type, agency of accident, parts of body affected, and operational process between indoor and outdoor workplaces were statistically different each other. Conclusion and Application: The findings of occupational accidents' characteristics can be applied to the establishment of systematic preventative policies for occupational accidents of telecommunications line/equipment workers.

• 한국가스학회지
• /
• 제13권2호
• /
• pp.41-48
• /
• 2009

지난 30년 동안 발생한 천연가스자동차 사고사례를 수집하고 사고원인을 용기의 형태별로 분석하였다. 먼저 국내에서는 지금까지 6건의 사고가 발생하였는데 사고원인으로는 열처리 불량으로 인한 용기파열사고가 3건이고 복합재료의 손상에 의한 용기파열과 천연가스자동차 화재로 인한 용기파열, 그리고 정비불량으로 인한 연료배관 가스누출사고가 각각 1건씩을 기록하고 있다. 국외에서 발생한 사고를 용기 형태별로 살펴보면, 전체 사고용기의 약 29%가 Type I 용기에서 발생하였고, Type IV가 약 24%, Type II가 16%, 그리고 Type III가 14%를 차지하고 있다. 사고원인에 있어서는 원재료 및 제조과정의 오류에 의한 용기파열이 37%로 가장 높았고 용기의 반복사용으로 인한 응력부식균열이 16%로 위 두 가지 사고원인이 전체 사고용기의 절반을 차지하였다. 다음은 PRD의 결함과 과충전으로 인한 용기파열사고가 15%이고 그 밖에 화재 및 원인불명 등이 나머지를 차지하고 있음을 알 수 있다. 이상에서 용기제조자는 용기형태에 관계없이 원재료 및 용기제조공정의 품질관리와 라이너의 부식을 방지하는 도장을 강화해야 하고, 운송사업자는 연료장치의 일상점검을 통해 천연가스자동차의 시설을 항상 안전한 상태로 유지 관리하는 노력이 필요하다고 요약할 수 있다.