• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.352-358
• /
• 2012

Purpose: The inexpensive black box system was developed to acquire and save driving information, to give the slope information, and to transmit SOS and theft signal. Method: The device consists of a main micro controller to acquire and save data, a GPS sensor module, a CDMA module, a touch LCD module, a RF (Radio Frequency) ID module, a SD (Secure Digital) card module, an emergency electric power source, a theftproof circuit, and a sensing device. The sensing device consists of a 8 bit micro controller, a accelerometer to detect impulse, two slope sensors to detect roll and pitch angle and a circuit to detect operation of 6 lighting devices. Results: Test results are as follows: 1) a tractor can be start up only with an electronic key (password or RFID card), 2) theft signal was transmitted when a tractor moved without an electronic key, 3) SOS was transmitted at conditions that rollover or crash happened. 4) 5 more than per 1s data are recorded at 5 minute intervals as new file name in SD card. Conclusions: This system can be used to save travelling record, reduce accident, prevent theft and rescue life in the accidents.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.254-266
• /
• 2010

This study dealt with Traffic Problem to Cheonan city. This study ran parallel literature investigation and actual proof investigation. Questionnaires 394 enforce frequency analysis in SPSS 15.0 versions. Traffic Problem to Cheonan city include the discomfort of public transportation, parking problem, pollution of automobile, traffic accident. By improvement of traffic problem, first, improvement plan of transportation system by administration of logical traffic demand should be readied. Second, because Cheonan city is many an university student who is use target of public transportation, public transportation utilization ratio must raise through discount application. Third, solution of traffic jam need to the improvement and strengthening of system of public transit. Fourth, Cheonan city must push ahead with supplies of traffic facility, modify of transportation network, and improvement of operating system. In particular, Cheonan city need to modify old road and improvement of accessibility though road network briefly. Fifth, Cheonan city need fixing of van traffic culture such as solution of parking problem and traffic order consciousness fostering of users.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.1
• /
• pp.45-51
• /
• 2008

The purpose of this survey was to identify ergonomic risk factors of work-related musculoskeletal disorders (MSD) and understand the current MSD risk status in the wholesale/retail industry. The field survey was conducted at 120 wholesale/retail establishments, and the cause of MSD occurred from the national industrial accident statistics by the Ministry of Labor in 2006 was analyzed in terms of company size, a term of work, job title, and cause of occurrence. The numbers of disasters on MSD were 602 which were included 432 disasters who met with low back pain by incident. A checklist was developed by KOSHA to use for the field survey. A total of 419 tasks were identified at the 120 establishments surveyed. The highest frequency was Task 2(45%) which was mostly observed in repetitive work (e.g. displaying, scanning, cutting or wrapping of goods). The second and third were Task 9(34%) and Task 8(14%) which were identified in manual materials handling (e.g. lifting, lowering, carrying or stocking of goods). The results suggest that the three Tasks should be first considered for the control in wholesale/retail industry and that exposure to MSD risk factors in those Tasks should be primarily addressed in order to reduce MSD risk in that industry.

• Journal of agricultural medicine and community health
• /
• v.23 no.1
• /
• pp.51-64
• /
• 1998

This study was carried out during 3 years from March 1992 to March 1995, 140 healthy people and 140 C.V.A patients were investigated, at an oriental clinic in Taejon. The data collected was analysed using a SAS. The results are as follows. 1. The Relationships between patients who have undergone one or more abortion procedures and C.V.A occurrence. A statistical significant difference was recorded between the control group and the outpatients group of P<0.05 2. Number of years after initial C.V.A diagnosis before C.V.A symptom onset. within 1 years 52% (2-3 years, 3-4 years, 4-5 years, 5 years and over) 3. Additional diseases occurring after initial stroke 1 disease 50.7% (2, 3, 4, 5 or more) 4. Alcohol Consumption "A statistical significant difference was recorded between the control group and the outpatients group of" P<0.01 5. Previous Treatment Experience for stoke outpatients Oriental Hospital, clinic 64.3% (General Hospital, clinic, a public health center drug store, home remedies, etc) 6. Exercise Frequency Outpatients Regular 28.6%, Irregular 71.4% Control sample Regular 27%, Irregular 72.9% 7. Degree of Appetite "A statistical significant difference was recorded between the control group and the outpatients group of" P<0.01 8. People who include fish in their diet "A statistical difference was recorded between the control group and the outpatients group of" P<0.01.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.471-482
• /
• 1995

Bony remodeling pattern of condyle fractures in children are different from in adult for growing of condyle, also might affect treatment and prognosis of the condyle fracture. Subjects of this clinical and radiologic study were 26 temporomandibular joints diagnosed as condyle fracture in 23 patients under 15 years old age. They were treated with conservative method at Dental Hospital of Yonsei University from Jan., 1986 to Oct., 1994. Bony remodeling related with fracture pattern was evaluated. The results obtained are as follows: 1. The ratio of male to female in patients with condyle fracture was 1 : 0.9 and the difference of sex ratio was not noted. Comparing with preschool-age group and school-age group, age frequency was higher in preschool-age group(83％). 2. Fallen down(54％) was the most frequent cause of condyle fractures. Traffic accident and slip down were followed. 3. The most common clinical sign of condyle fractures was tenderness to paipation09 cases). Mouth opening limitation07 cases), swelling(7 cases), malocclusion(3 cases) were next in order. 4. According to sites of condyle fractures, unilateral fractures were in 20 patients and bilateral fractures in 3 patients, therefore total 23 patients-26 cases of condyle fracture were observed. According to fracture distribution, condyle fractures were in 10 patients(44％). Condyle fractures with symphysis fracture(9 patients, 39％), condyle fractures with ascending ramus fracture(2 patients, 9％), condyle fracture with mandibular body fracture(1 patient, 4％), and condyle fractures with mandibular angle fracture(1 patient, 4％) were followed. 5. In displacement pattern of fractured fragment of mandibular condyle, dispiacement(17 cases, 66％) was most common. Dislocation(5 cases, 19％) and deviation (4 cases, 15％) were next in order. 6. During the observation period of fractured condyles, remodeling patterns of fracture sites related with articular fossa were observed with usual condylar shape in 23 cases and with prominently different shape in 3 cases.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.251-257
• /
• 2011

When designing a ship, ergonomic considerations are crucial when minimizing a navigator's fatigue due to the burden of work, and to appropriately operate the navigational equipment for each given situation by helping the operator to understand the surroundings as well as the physical functions of the ship. However, insufficient consideration of ergonomic elements in the actual design of ship Bridges is lowering the performance of safe navigation and allows for the possibility of operation or readout errors. Consequently, these errors lead to an increase in maritime accidents. Therefore, this study conducted a usability evaluation on the importance of and the usage frequency of navigational equipment, their influence on actual navigation, and the possibility of error upon operation or readout between training ship officers, to derive an optimized layout that includes the consideration of ergonomic factors for on-Bridge navigational equipment, which are currently arranged differently according to their type or size. The optimized layout of on-Bridge navigational equipment was carried out based on the evaluation results, using the Lingo program. Through the process of optimization, revised layouts of on-Bridge navigational equipments(control and display device) were suggested, considering emergency situations(ship collision, stranding, fire and explosion, sinking, etc.) during navigation.

• Journal of Korean Clinical Nursing Research
• /
• v.26 no.2
• /
• pp.131-140
• /
• 2020

Purpose: This study aims to describe the characteristics of safety incidents and factors associated with injury for patients with Home Mechanical Ventilation (HMV) at the hospital. Methods: This is a retrospective study. Data were collected from the work log of respiratory home care nurses and the patients' electronic medical records were investigated. In order to compare group differences, independent t-test and χ² test were used. Associated factors with injury development were identified by generalized mixed modeling analysis controlling for age and gender. Results: A total of 304 patients on HMV were included in this study, among which 129 (42.4%) experienced 352 HMV-related incidents. Mean frequency of incidents for each patient was 5.11±3.98, ranged from 1 to 15 times. In 19.0% of the incidents, injury was developed. Types of incident and persons involved in the incidents were significantly associated with the patient's injury. In the case of the safety incidents, patient's injury was significantly higher in accidents caused by respiratory circuit problems compared to those caused by problems with the ventilator operation by the medical staff (coefficient=1.25, p=.020). In addition, in the case of those involved in the safety incidents, patient's injury was significantly higher in the accident caused by the patient family members or caregivers than that caused by the medical personnel (coefficient=1.25, p=.019). Conclusion: In order to minimize injury caused by incidents in patients with HMV, hospitals need to provide systemic education to their medical staff and caregivers to enhance awareness of the importance of reporting and safety management.

• Safety and Health at Work
• /
• v.8 no.1
• /
• pp.59-66
• /
• 2017

Background: Despite considerable efforts made in recent years, the industrial accident rate and the fatality rate in the Republic of Korea are much higher than those in most developed countries in Europe and North America. Industrial safety policies and safety regulations are also known to be ineffective and inefficient in some cases. Methods: This study focuses on the quantitative evaluation of the effectiveness of direct safety regulations such as safety certification, self-declaration of conformity, and safety inspection of industrial machines in the Republic of Korea. Implications on safety policies to restructure the industrial safety system associated with industrial machines are also explored. Results: Analysis of causes in industrial accidents associated with industrial machines confirms that technical causes need to be resolved to reduce both the frequency and the severity of such industrial accidents. Statistical analysis also confirms that the indirect effects of safety device regulation on users are limited for a variety of reasons. Safety device regulation needs to be shifted to complement safety certification and self-declaration of conformity for more balanced direct regulations on manufacturers and users. An example of cost-benefit analysis on conveyor justifies such a transition. Conclusion: Industrial safety policies and regulations associated with industrial machines must be directed towards eliminating the sources of danger at the stage of danger creation, thereby securing the safe industrial machines. Safety inspection further secures the safety of workers at the stage of danger use. The overall balance between such safety regulations is achieved by proper distribution of industrial machines subject to such regulations and the intensity of each regulation. Rearrangement of industrial machines subject to safety certification and self-declaration of conformity to include more movable industrial machines and other industrial machines with a high level of danger is also suggested.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.2
• /
• pp.465-472
• /
• 2016

Principal Component Analysis (PCA) is useful statistical technique for finding patterns in data, and expressing the data in such a way as to highlight their similarities and differences. In this paper, 1417 marine casualties occurred in Korean littoral sea in recent 5 years, were examined by the PCA. The main results obtained were as follows : 1. Most of marine casualties resulted from the human factors such as careless operation and insufficient engine maintenance. 2. Collision and standing mainly resulted from steering room-related human factors such as careless guard, inadequate ship-handling, however engine damage and fire explosion mainly resulted from engine room-related human factor such as bad handling of engine system. 3. No. 1 principal component represents accident frequency, No. 2 principal component represents the cause and No. 3 principal component represents the pattern of marine casualties, respectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.3
• /
• pp.215-221
• /
• 2018

The structural design of offshore installations against explosions has been required to protect vital areas (e.g. control room, worker's area etc.) and minimize the damage from explosion accidents. Because the explosion accident will not only result in significant casualties and economic losses, but also cause serious pollution and damage to surrounding environment and coastal marine ecosystems. Over the past two decades, an incredible efforts was made to develop reliable methods to reduce and manage the explosion risk. Among the methods Quantitative Risk Assessment and Management (QRA&M) is the one of cutting-edge technologies. The explosion risk can be quantitatively assessed by the product of explosion frequency based on probability calculation and consequence analyzed using computer simulations, namely Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA). However to obtain reliable consequence analysis results by CFD and FEA, uncertainties associate with modeling and simulation are needed to be identified and validated by comparison with experimental data. Therefore, large-scaled explosion test procedure is developed in this study. And developed test procedure can be helpful to obtain precious test data for the validation of consequence analysis using computer simulations, and subsequently allow better assessment and management of explosion risks.