• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.801-809
• /
• 2005

This paper proposes a new algorithm for improving the performance of the spatial filter which is the most important part of deinterlacing methods. The conventional edge-based algorithms are not satisfactory in deciding the exact edge direction which controls the performance of the interpolation. The proposed algorithm much increases the performance of the intrafield interpolation by finding exact edge directions based on the binary image. Edge directions are decided using 15 by 3 local window to find not only more accurate but also many low-angle edge directions. The proposed interpolation method upgrades the visual quality of the image by alleviating the misleading edge directions. Simulation results for various images show that the proposed method provides better performance than the existing methods do.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.601-610
• /
• 2004

In this paper, the performance of an adaptive array antenna using Constant Modulus Algorithm (CMA) based on the signal structure for the IMT-2000 3GPP specification reverse link of an asynchronous direct sequence code division multiple access (DS-CDMA) system are evaluated. In addition, the performance is compared with the array antenna using Least Mean Square (LMS) based on the training signal. The simulation parameters such as the number of multipath, mu10pa1h intensity profiles between path, spreading gain and multiuser etc., are considered in the Monte Carlo simulation. Simulation results demonstrate an adaptive array antenna using CMA may give more capacity gain than the amy antenna using LMS in the case of multipath fading channel.

• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.174-180
• /
• 2010

Automatic Repeat reQuest (ARQ) is a very effective technique against transmission error at the medium access control (MAC) layer. An erroneous MAC protocol data unit can be typically retransmitted within a given limit. In order to improve the IP-level performance, which directly affects the user-perceived quality-of-service (QoS), we propose a new truncated ARQ strategy, called MAC service data unit-based ARQ (S-ARQ), where the finite number of opportunities for retransmissions are shared by multiple fragments out of an IP datagram. We describe how SARQ can be implemented in a practical system, and then propose another variant of S-ARQ employing a functionality called early detection of failure. Basically, we evaluate the performance of SARQ in two different manners. First, assuming i.i.d. error process, we analyze both the probability of the delivery failure and the average delay of IP datagram. Then, we assess the performance of S-ARQ via simulation over a 2-state Markov channel.

• Journal of Communications and Networks
• /
• v.10 no.2
• /
• pp.175-185
• /
• 2008

In this paper, we investigate the effect of cooperative and selection relaying schemes on multiuser diversity in downlink cellular systems with fixed relay stations (RSs). Each mobile station (MS) is either directly connected to a base station (BS) and/or connected to a relay station. We first derive closed-form solutions or upper-bound of the ergodic and outage capacities of four different downlink data relaying schemes: A direct scheme, a relay scheme, a selection scheme, and a cooperative scheme. The selection scheme selects the best access link between the BS and an MS. For all schemes, the capacity of the BS-RS link is assumed to be always larger than that of RS-MS link. Half-duplex channel use and repetition based relaying schemes are assumed for relaying operations. We also analyze the system capacity in a multiuser diversity environment in which a maximum signal-to-noise ratio (SNR) scheduler is used at a base station. The result shows that the selection scheme outperforms the other three schemes in terms of link ergodic capacity, link outage capacity, and system ergodic capacity. Furthermore, our results show that cooperative and selection diversity techniques limit the performance gain that could have been achieved by the multiuser diversity technique.

• Journal of Communications and Networks
• /
• v.10 no.2
• /
• pp.186-193
• /
• 2008

A two-hop multiple-input multiple-output (MIMO) relay network which comprises a multiple antenna source, an amplify-and-forward MIMO relay and many potential users are studied in this paper. Consider the achievable sum rate as the performance metric, a joint design method for the processing units of the BS and relay node is proposed. The optimal structures are given, which decompose the multiuser MIMO relay channel into several parallel single-input single-output relay channels. With these structures, the signal-to-noise ratio at the destination users is derived; and the power allocation is proved to be a convex problem. We also show that high sum rate can be achieved by pairing each link according to its magnitude. The sum rate of three broadcast strategies, time division multiple access (TDMA) to the strongest user, dirty paper coding (DPC), and beamforming (BF) are investigated. The sum rate bounds of these strategies and the sum capacity (achieved by DPC) gain over TDMA and BF are given. With these results, it can be easily obtained that how far away TDMA and BF are from being optimal in terms of the achievable sum rate.

• 전자공학회논문지 IE
• /
• v.43 no.2
• /
• pp.75-79
• /
• 2006

Blind techniques without the help of training sequences are able to detect the information signal which has the minimal information of desired user. In this paper, we proposed the blind multiuser detector using the hybrid cost function to cancel the multiple user interference in direct sequence code division multiple access systems. The cost function of proposed blind multiuser detector is the hybrid type which joints both least mean square(LMS) algorithm and least mean fourth(LMF) algorithm. We evaluate the bit error rate(BER) performance of proposed blind multiuser detector under additive white Gaussian noise channel. Simulation results show that the proposed blind detector has an about 3dB of signal to noise ratio more than blind minimum output energy(MOE) multiuser detector under existing active user 20.

• ETRI Journal
• /
• v.39 no.2
• /
• pp.213-221
• /
• 2017

The advent of wireless access in vehicular environments (WAVE) technology has improved the intelligence of transportation systems and enabled generic traffic problems to be solved automatically. Based on the IEEE 802.11p standard for vehicle-to-anything (V2X) communications, WAVE provides wireless links with latencies less than 100 ms to vehicles operating at speeds up to 200 km/h. To date, most research has been based on field test results. In contrast, this paper presents a numerical analysis of the V2X broadcast throughput limit using a path loss model. First, the maximum throughput and minimum delay limit were obtained from the MAC frame format of IEEE 802.11p. Second, the packet error probability was derived for additive white Gaussian noise and fading channel conditions. Finally, the maximum throughput limit of the system was derived from the packet error rate using a two-ray path loss model for a typical highway topology. The throughput was analyzed for each data rate, which allowed the performance at the different data rates to be compared. The analysis method can be easily applied to different topologies by substituting an appropriate target path loss model.

• Journal of electromagnetic engineering and science
• /
• v.9 no.2
• /
• pp.78-84
• /
• 2009

This paper represents the effects of drain bias on the linearity and efficiency of an analog pre-distortion power amplifier(PA) for wideband code division multiple access(WCDMA) repeater applications. For verification, an analog predistorter(APD) with three-branch nonlinear paths for memory-effect compensation is implemented and a class-AB PA is fabricated using a 30-W Si LOMaS. From the measured results, at an average output power of 33 dBm(lO-dB back-off power), the PA with APD shows the adjacent channel leakage ratio(ACLR, ${\pm}$5 MHz offset) of below -45.1 dBc, with a drain efficiency of 24 % at the drain bias voltage($V_{DD}$) of 18 V. This compared an ACLR of -36.7 dEc and drain efficiency of 14.1 % at the $V_{DD}$ of 28 V for a PA without APD.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.93-102
• /
• 2000

This paper describes the architecture and characteristics of the satellite modem unit (SMU) developed for the DAMA-SCPC Ground System(DGS), which is a Demand Assignment Multiple Access-Single Channel per Carrier (DAMA-SCPC) satellite network. There are several requirements for the SMU from the system architecture and design concept. To meet these requirements the SMU was designed and implemented by extensively applying digital signal processing (DSP) technique and field programmable gate array (FPGA). The developed SMU met the functional and performance requirements, and has been working well. The measured BER was about 1 $\times$10E-4 in continuous mode(at Eb/No=4.7, FEC=3/4).

• Journal of the Korea Society for Simulation
• /
• v.21 no.2
• /
• pp.69-78
• /
• 2012

In this paper, a study on finding an appropriate helper node that can help increase effective frame transmission rate for cooperative communications at ad hoc networks is carried out. Those researches from reference use the reactive helper node selection mechanism which starts its role after exchanging RTS and CTS frames between source and destination nodes, and are implemented into our simulator for performance comparison. System throughput and average channel access delay are used for performance measures and all communicating nodes are assumed to move independently within the communication range. It is anticipated that this research result can be used as basic information for designing a new efficient helper node selection scheme.