• 제목/요약/키워드: acceptable price range

검색결과 18건 처리시간 0.023초

Slaughterhouse wastewater treatment in a bamboo ring anaerobic fixed-bed reactor

  • Tritt, Wolfgang P.;Kang, Ho
    • Environmental Engineering Research
    • /
    • 제23권1호
    • /
    • pp.70-75
    • /
    • 2018
  • A pilot scale anaerobic fixed-bed with a reactor volume of $2.8m^3$ was built to treat slaughterhouse wastewater. Bamboo rings were chosen as support media mainly because of their cheaper price in underdeveloped countries. Even with their lower porosity and specific surface, the reactor performance showed a maximum 95% COD removal efficiency at an organic loading rate (OLR) of $1kg\;COD/m^3-d$ with its corresponding hydraulic retention time (HRT) of 7.5 d. At a higher OLR of $4.0kg\;COD/m^3-d$, the COD removal efficiency of 75% was achieved with an HRT of 2 d. No big difference in COD removal efficiencies was found between the reactors operated in both upflow and downflow modes. Their operational behavior and effluent characteristics were similar. The effluent COD/TKN ratio of 6.67 at an OLR of $4.0kg\;COD/m^3-d$ was only marginal acceptable range for a subsequent biological denitrification process. Otherwise carbon supplementation is required at a lower OLR.

농형 유도발전기의 계통 연계시 전압 변동 및 전력 흐름 분석 (Analysis for Voltage Fluctuation and Power Flow at the Grid-Connected Time of Squirrel-Cage Induction Generator)

  • 김종겸
    • 조명전기설비학회논문지
    • /
    • 제28권6호
    • /
    • pp.45-51
    • /
    • 2014
  • Synchronous generators and induction generators are mainly used in hydroelectric power generation. Synchronous generator is mainly applied to large hydroelectric plants but induction generator is applied to the small hydro power plants. Stability of induction generator is slightly less than the synchronous generator. However, induction generator has many advantages rather than a synchronous generator in terms of price and maintenance. So Induction generator is used primarily in small hydroelectric power station less than 1,000kW recently. Squirrel cage induction generator generates a high inrush current at the grid-connection. This high inrush current causes a voltage drop on the grid. In order to reduce the voltage drop and to analyze the power flow, the analysis for operating characteristics of the induction generator should be reviewed in advance. In this study, we analyzed the voltage drop and power flow analysis when a 1500kW induction generator is connected to the grid. The voltage drop is slightly higher than the acceptable range of distributed power supply voltage and the power flow of the generator is performed well.

자연경관에 도입되는 건축물의 경관민감도 측정에 관한 연구 (Study on the Measuring Landscape Sensitivity of Buildings in Natural Landscape)

  • 신지훈;최원빈;신민지
    • 농촌계획
    • /
    • 제24권2호
    • /
    • pp.59-67
    • /
    • 2018
  • As high-rise buildings came in, the landscape of rural areas and natural landscapes often got damaged. Therefore, this study aims to prevent this, grasp the extent of the influence of the surrounding landscape, to grasp the range of height that can be permitted and present the direction of landscape management of agriculture and natural landscape. This study tried to grasp the range of height by using price sensitivity analysis method for two apartment and apartment complex which entered DangJin city and SeoSan city. First, in the case of a two apartment, the range of the height allowable section was from the 6th floor to the 11th floor in close range view, and it was a section from the 7th floor to the 12th floor in medium range view. In the case of the apartment complex, the range of the height allowable range was from the 10th floor to the 17th floor in close range view, the 9th floor to the 16th floor in medium range view. The stress index was found to be positive in a two apartment in close range view, and in the apartment complex case. therefore it was better to set it to a lower in the Range of Acceptable Height(RAH). Second, it showed no difference in the sensitivity of landscape to gender. Thirdly, the results of the landscape sensitivity analysis of major and non-major showed the difference in the medium range view picture of the apartment complex. Majors are lower than the point of minimum height(PMinH) than non-Majors. In the case of major, the stress index was 1.4. it turned out that it was better to make a decision closer to point of minimum height (PMinH). In the case of non-major, the stress index was -1.3. it was also able to accept decision close to the point of maximum height (PMaxH). Since the results of the above research gave changes only in the variable of the height of the landscape, we can not grasp the point of interaction with other variables, and future research is considered necessary.

대학급식의 친환경 농산물 이용에 대한 전남.경남지역 대학생의 가격민감성 비교 (Comparative Analysis of Price Sensitivity for Using Environmental-Friendly Agricultural Products in University Foodservices Between Jeonnam and Gyeongnam Areas in Korea)

  • 이소정;김현아
    • 한국식품영양과학회지
    • /
    • 제39권8호
    • /
    • pp.1220-1230
    • /
    • 2010
  • 본 연구는 전남지역과 경남지역의 대학생을 대상으로 대학교내 학생식당에 대한 가격민감성과 대학급식에서 친환경 농산물 이용 시 부가되는 가격인상폭에 대한 가격민감성의 두 지역 간 차이를 비교 분석하여 대학급식에 친환경 농산물 사용에 대한 적용 가능성과 대학급식에 친환경 농산물 사용 시 가격인상률에 대한 적정선을 제시하는 데 기초 자료를 제공하고자 수행되었다. 본 연구의 수행을 위해 2008년 7월 15일부터 7월 25일 사이에 경남지역과 전남지역 대학생들에게 각각 600부의 설문지를 배부하였으며 경남지역에서는 490부, 전남지역에서는 570부가 회수되었고 그중 부적절한 응답을 한 설문지를 제외하여 경남지역은 480부(이용률: 80.0%), 전남지역은 555부(92.5%)가 최종 분석에 사용되었다. 본 연구의 결과는 다음과 같았다. 첫째, 조사대상의 일반사항을 조사한 결과 경남지역과 전남지역 간의 큰 차이는 없었으며, 다만 경남지역 대학생들의 용돈 수준이 전남지역 대학생들의 용돈 수준보다 다소 높은 편이었다. 대학급식 이용실태에서 경남지역 대학생들이 전남지역 대학생들보다 학교 내 학생식당을 좀 더 자주 이용하는 것을 알 수 있었으며(p<0.001), 학교 내 급식소를 이용하는 이유에 대하여서는 전남지역 대학생들은 '가격이 저렴해서'라고 응답한 비율(67.6%)이 많았으며, 경남지역 대학생들은 '시간이 절약되므로'라고 응답한 비율(58.1%)이 많아 두 지역 간에 차이를 나타내었다(p<0.001). 또한 대학 내 학생식당의 이용을 꺼리는 이유에 대하여서는 두 지역 모두 '음식 맛이 좋지 않아서', '메뉴가 다양하지 않아서'의 두 문항에 대한 응답이 대부분을 차지하였지만, 경남지역에서 '음식 맛이 좋지 않아서'가 상당 부분을 차지하여 지역 간 유의한 차이를 보였다(p<0.001). 둘째, 대학급식에서의 친환경 농산물 이용에 대한 찬성 여부를 조사한 결과 전남지역은 조사 대상 중 496명 (89.4%), 경남지역은 조사 대상 중 379명(79.8%)이 찬성하였으며, 전남지역과 경남지역 간의 유의적인 차이(p<0.001)를 나타내었다. 친환경 농산물 사용으로 인하여 식사 가격 인상시 대학급식 이용 의사를 분석한 결과 전남지역은 조사대상의 326명(59.0%)이 이용 의사가 있다고 응답하였고 경남지역은 202명(42.5%)이 이용 의사가 있다고 응답하여 두 지역간의 유의적인 차이를 보였다(p<0.001). 셋째, 대학교내 학생식당에 대한 가격 민감성 분석 결과 무관심가격의 경우 전남지역은 2,300원, 경남지역은 2,500원이었으며, 최적 가격점은 전남지역은 2,100원, 경남지역은 2,280원이었다. 가격의식긴장은 전남은 200원, 경남은 220원이었다. 수용가격대는 전남의 경우 1,770원(1,430~3,200원), 경남의 경우 1,690원(1,680~3,370원)으로 나타났다. 즉 무관심 형성 비율, 가격의식긴장범위, 수용가격대의 세 가지 기준 모두에서 경남지역 대학생은 전남지역 대학생보다 가격에 더 민감하게 반응함을 알 수 있었다. 넷째, 친환경 농산물을 대학급식에 사용할 경우 가격 인상폭에 대한 가격민감성 분석 결과 무관심 가격은 전남지역은 890원, 경남지역은 1,050원, 최적 가격점은 전남은 1,030원, 경남은 1,450원으로 분석되었으며, 가격의식긴장은 전남은 140원, 경남은 400원인 것으로 분석되었다. 수용가격대는 전남지역은 670원(500~1,170원), 경남지역은 1,030원(790~1,820원)으로 나타났다. 가격의식긴장 범위를 기준으로 할 때는 경남지역 대학생이 전남지역 대학생 보다 가격에 더 민감한 것으로 분석되었지만, 무관심가격 형성 비율과 수용가격대를 기준으로 할 때는 전남지역 대학생이 경남지역 대학생보다 더 민감한 것으로 분석되어 기준에 따라 상반된 결과를 보였다. 다섯째, 향후 두 지역에서 친환경 농산물을 대학급식에서 사용할 경우 가격 인상폭은 수용가격대 즉 전남지역은 500원에서 1,170원 사이, 경남지역은 790원에서 1,820원 사이를 벗어나지 않도록 하여야 한다. 하지만 경남지역의 경우 가격 인상 시 대학급식소를 이용하지 않겠다는 의견이 절반 이상을 차지하였으므로 소비자의 거부감이 가장 적은 가격인 최적 가격점인 1,450원 이하의 수준에서 가격 인상은 가능할 것으로 사료된다. 동시에 현재 대학급식에 대한 가격 민감도가 높은 편이므로 친환경 농산물 사용 시 신중한 가격 인상 정책과 함께 가격에 상응하는 급식 품질의 향상이 반드시 함께 동반되어야 할 것이다. 전남지역의 경우 대학급식에 있어서 가격에 대한 매력도가 높은 특징이 있으므로 가격 인상 시 인상폭은 수용가격대 범위 안에서 정하도록 한다. 본 연구 결과를 바탕으로 향후 연구에 대한 제언을 하면 다음과 같다. 첫째, 본 연구는 표본추출에 있어서 전남지역과 경남지역의 각각 한 개 대학의 대학생을 대상으로 표본을 추출하여 다양한 집단을 대상으로 실시하지 못 한 한계점이 있다. 따라서 향후 좀 더 다양한 지역을 대상으로 우리나라 대학 급식에 대한 지역 간의 인식 차이에 대한 분석이 이루어져야 하겠다. 둘째, 본 연구에서 전남과 경남의 지역 간의 인식 차이가 있는 것으로 나타났는데, 이러한 인식의 차이에 대한 충분한 이해를 위해서 여러 다양한 측면에서의 비교문화적인 접근이 필요하겠다.

가격민감성 측정 기법을 이용한 대학생의 커피전문점 가격에 대한 인식 분석 (Analysis of University Student' Perception of Coffee Shop Prices through Price Sensitivity Measurements)

  • 김현아
    • 한국식품영양과학회지
    • /
    • 제41권8호
    • /
    • pp.1182-1189
    • /
    • 2012
  • 본 연구는 창원시 마산에 소재한 K대학교에 재학 중인 대학생들을 대상으로 커피전문점에 대한 가격 민감성을 분석하기 위하여 수행되었다. 본 연구의 수행을 위해 2011년 3월 31일부터 4월 8일까지 총 640부의 설문지를 배포하여 그중 571부를 최종 분석에 사용하였다. 본 연구 결과의 요약은 다음과 같다. 첫째, 커피전문점의 적정 가격에 대하여 조사한 결과 아메리카노의 경우 대학 내 커피전문점은 1,503원, 일반 커피전문점은 2,183원으로 유의적인 차이를 보였으며(p<0.001), 카페라떼의 경우 대학 내 커피전문점은 2,047원, 일반 커피전문점은 2,801원으로 유의한 차이를 보였다(p<0.001). 즉 아메리카노와 카페라떼 모두 일반 커피전문점 이용 시의 적정 가격이 대학 내 커피전문점 이용 시의 적정 가격보다 높게 인식하고 있었다. 둘째, 아메리카노에 대한 가격민감성 분석 결과 대학 내 커피전문점의 경우 무관심가격형성비율 24%, 가격인식긴장범위 100원, 수용가격대 2,500원이었으며, 일반 커피전문점의 경우 무관심가격형성 비율 21%, 가격인식긴장범위 0원, 수용가격대 2,600원이었다. 아메리카노에 대한 대학 내 커피전문점과 일반 커피전문점의 가격민감성을 비교 분석한 결과 가격의식긴장범위와 수용가격대 기준에서는 대학 내 커피전문점이 더 민감하였으며, 무관심형성비율을 기준으로는 일반 커피전문점이 더 민감하였다. 대체적으로 아메리카노 커피 구매 시 대학생들은 대학 내 커피전문점을 이용할 경우 일반 커피전문점을 이용할 경우보다 가격에 더 민감하다는 것을 알 수 있었다. 셋째, 카페라떼에 대한 가격민감성 분석 결과 대학 내 커피 전문점의 경우 무관심가격형성비율 22%, 가격인식긴장범위 100원, 수용가격대 2,400원이었으며, 일반커피전문점의 경우 무관심가격형성비율 26%, 가격인식긴장범위 100원, 수용가격대 2,450원이었다. 카페라떼에 대한 대학 내 커피전문점과 일반 커피전문점의 가격민감성을 비교 분석한 결과 가격의식긴장범위의 기준에서는 가격민감성의 차이가 없었으나 무관심가격형성비율과 수용가격대 기준에서는 대학 내 커피전문점이 더 민감한 것으로 판단되었다. 즉, 대학생들은 카페라떼를 구입할 경우 일반 커피전문점보다 대학내 커피전문점에서 가격에 더 민감하게 반응한다는 것을 알 수 있었다. 결론적으로 대학생 집단은 대학 내 커피전문점에서 커피를 구입할 때 일반 커피전문점보다 가격을 좀 더 중요하게 생각하는 것을 알 수 있었으므로 대학 내 커피전문점 운영자는 가격 결정 시 매우 신중해야 하며, 일반 커피전문점 운영자는 이용 고객이 가격보다는 품질에 대해 좀 더 잘 인지할 수 있도록 노력하는 것이 필요하다. 본 연구는 일부 지역인 창원시 마산 지역 대학생을 대상으로 하였으므로 향후 다양한 지역, 다양한 연령 계층을 대상으로 실시하여 지역간, 연령 층 간의 가격민감성 비교 분석이 이루어져야 하겠다. 또한 주기적으로 가격민감성 분석이 이루어져 시간 흐름에 따른 고객의 가격과 품질에 대한 인식의 변화 추이에 대하여도 함께 연구되어야 하겠다.

시뮬레이션을 기반(基盤)으로 하는 영업이윤율(營業利潤率) 추정(推定) 시스템 (Simulation-Based Stochastic Markup Estimation System $(S^2ME)$)

  • 이창용;김률희;임태경;김화중;이동은
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2007년도 추계 학술논문 발표대회
    • /
    • pp.109-113
    • /
    • 2007
  • This paper introduces a system, Simulation based Stochastic Markup Estimation System (S2ME), for estimating optimum markup for a project. The system was designed and implemented to better represent the real world system involved in construction bidding. The findings obtained from the analysis of existing assumptions used in the previous quantitative markup estimation methods were incorporated to improve the accuracy and predictability of the S2ME. The existing methods has four categories of assumption as follows; (1) The number of competitors and who is the competitors are known, (2) A typical competitor, who is fictitious, is assumed for easy computation, (3) the ratio of bid price against cost estimate (B/C) is assumed to follow normal distribution, (4) The deterministic output obtained from the probabilistic equation of existing models is assumed to be acceptable. However, these assumptions compromise the accuracy of prediction. In practice, the bidding patterns of the bidders are randomized in competitive bidding. To complement the lack of accuracy contributed by these assumptions, bidding project was randomly selected from the pool of bidding database in the simulation experiment. The probability to win the bid in the competitive bidding was computed using the profile of the competitors appeared in the selected bidding project record. The expected profit and probability to win the bid was calculated by selecting a bidding record randomly in an iteration of the simulation experiment under the assumption that the bidding pattern retained in historical bidding DB manifest revival. The existing computation, which is handled by means of deterministic procedure, were converted into stochastic model using simulation modeling and analysis technique as follows; (1) estimating the probability distribution functions of competitors' B/C which were obtained from historical bidding DB, (2) analyzing the sensitivity against the increment of markup using normal distribution and actual probability distribution estimated by distribution fitting, (3) estimating the maximum expected profit and optimum markup range. In the case study, the best fitted probability distribution function was estimated using the historical bidding DB retaining the competitors' bidding behavior so that the reliability was improved by estimating the output obtained from simulation experiment.

  • PDF

주조티타늄과 기계절삭티타늄 코핑의 변연적합성에 관한 연구 (THE STUDY ABOUT THE MARGINAL FIT OF THE CASTING TITANIUM AND MACHINE-MILLED TITANIUM COPINGS)

  • 오수연;방몽숙;양홍서;박상원;박하옥
    • 대한치과보철학회지
    • /
    • 제44권1호
    • /
    • pp.20-28
    • /
    • 2006
  • Statement of problem: The titanium has advantages of a high biocompatibility, a corrosion resistence, low density, and cheep price, so it is focused as a substituted alloy But it is quite difficult to cast with the tranditional method due to the high melting point, reacivity with element at, elevated temperature. By using the CAD-CAM system for the crown construction, it is possible to reduce the errors while proceeding the wax-up, investing, and casting procedure Purpose: The purposes of this study were to measure the marginal adaptation of the casting titanium coping and machine-milled titanium coping according to the casting methods and the marginal configurations. Material and method: The marginal configurations were used chamfer shoulder, and beveled shoulder. The total 30 copings were used, and these are divided into 6 groups according to the manufacturing method and marginal configuration. The gap between margin of the model and the restoration was measured with 3-dimensional measuring microscope. Results: The following results were obtained; 1. casting gold coping demonstrated the best marginal seal, followed by casting titanium coping finally machine-milled titanium copings. 2. In casting titanium coping, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. There was no significantly difference in shoulder and beveled shoulder. But all margin form has clinically acceptable 3. In machine-milled titanium copings, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. Beveled shoulder show large and uneven marginal gap Conclusions: Above result revealed that marginal adaptation of the titanim coping is avail able in the clinical range, it can be used as an alternative metal and it is prefered especially in chamfer or shoulder margin during implant superstructure fabrication. But there should be more research on machine-milled titanium in order to use it in the clinics.

우리나라 김치의 포장과 저장방법에 관한 연구 (Studies on the Packaging and Preservation of Kimchi)

  • 이양희;양익환
    • Applied Biological Chemistry
    • /
    • 제13권3호
    • /
    • pp.207-218
    • /
    • 1970
  • 우리나라 김치의 공업적 생산에 이바지 하고저 본 연구에서는 김치의 경제적이고 실용적인 포장방법과 제품의 신선도를 장기간 유지시킬 수 있는 저장방법의 개발을 시도하였다. 1. Panel test의 결과 우리나라 사람들의 식성은 김치의 적정산도가 젖산으로서 0.4%부터 0.75% 사이에 있을 때를 가식범위로 하고 있으며 최적 성숙시기는 0.5%부근임을 알았다. 그런데 냉장이나 방부제 사용의 경우에는 포장 후에도 제품의 성숙이 미약하게나마 계속되므로 이를 감안하여 적정산도 0.45% 정도인 약간 미숙한 시기가 포장적기라 할 수 있다. 저온 가열살균 방법을 이용할 경우는 성숙이 순간적으로 정지되므로 적정산도 0.5%의 시기가 최적 포장적기라 할수 있다. 2. Polyethylene, polypropylene 및 polycello의 3종의 포장 재료중 polyethylene은 대체로 양호한편이나 작업 및 취급 도중 포장의 파열이 빈번하고 김치 냄새의 일산이 심한 것이 단점이며 , polypropylene은 전자 보다는 훨씬 우수하며 포장이 강인 하고 투명도도 좋으나 역시 냄새의 일산이 다소 있었다. polycello는 물리적인 특성면에 있어서는 거의 이상적인 재료이지만 가격이 비싼 것이 단점이었다. 그리고 김치포장시 플라스틱 필름의 두께는 0.08mm가 가장 적당하였다. 3. 냉동방법에 의한 김치 저장은 장기간 제품을 산패없이 보존할 수는 있으나 해동시 배추 조직으로부터의 탈수 현상이 일어나 김치의 texture가 불량하게 되므로 적당한 방법이라 할 수 없었다. 4. 냉장방법은 김치의 신선도를 오랫동안 잘 유지시키는 데에 있어서는 가장 좋은 방법이었다. 냉장온도는 $0^{\circ}C$가 최적이었고 3개월 정도의 저장이 가능하였다. 5. 방부제에 의한 김치의 저장은 대체로 큰 효과를 얻을 수 없었는데 사용한 방부제 중에서는 potassium sorbate가 가장 좋은 결과를 나타내었으며 이에 의한 저장 가능 기간은 $20^{\circ}C$에서 4일 $30^{\circ}C$에서 2일 정도이었다. 6. 저온 가열 살균 방법에 있어서는 제품의 크기 및 두께가 열 침투에 크게 영향을 미쳐 살균정도를 좌우하였다. 얻어진 결과로서는 1.5cm 정도의 포장 두께에서 $65^{\circ}C$, 20분간의 가열 살균이 최적이며 이렇게 처리된 김치는 신선도가 별로 손상되지 않고 실온에서 1개월정도 저장이 가능하였다. 7. 병합처리 방법으로는 방법으로는 방부제와 저온 가열 처리의 복합방법, 방부제와 냉장의 복합방법, 그리고 열처리와 냉장의 복합방법을 실험하였는데 앞의 두 방법은 별로 처리 효과가 없었으나 세번째 방법은 상당히 좋은 효과가 있어 가열처리 후 상온에 저장하였을 때 일어나는 조직의 점진적인 변화가 방지될 뿐더러 냉장만을 적용할때 오는 발효의 진행을 중지시켜 4개월 이상 김치를 신선하게 유지시킬 수 있었다. 이때 가열처리 조건은 $65^{\circ}C$에서 20분간이었으며 냉장온도는 $4^{\circ}C$였다.

  • PDF